0.5ton to 30ton Manual Chain Block / Manual Chain Hoist (CH-H Type)
- Capacity of chain hoist ranges from 0.5t to 30t.
- Automatic double pawl braking system.
- Double cover protection.
- Light weight robust construction.
- Low effort to lift maximum load.
- Extra thick asbestos free friction discs.
- Fully forged hooks are fitted with safety latches as standard.
- ISO high grade alloy load chain.
- Zinc plated hand chain as standard.
- Sealed bearing.
- Each hoist is proof tested at 1.5 times of WLL up to 10t, 1.25 times of WLL up to 30t.
- Complies with Ec Council Directive 2006/42/EC Machinery, ASME B30.16, AS 1418.2.
ALWAYS:
? Store and handle chain blocks correctly.
? Inspect chain blocks and accessories before use and before placing into storage.
? For top hook suspension, use hooks that are fitted with safety catches, or mouse the hook, ensuring the support fits freely
Into the seat of the hook.
? For trolley suspension ensure the trolley is correctly set for the beam width.
? Check that the bottom hook will reach its lowest point without running the chain fully out.
? Adopt safe slinging practices and follow the instructions for the safe use of the equipment used.
NEVER:
? Expose chain blocks to chemicals, particularly acids, without consulting the supplier.
? Replace the load chain with a longer one without consulting the supplier.
? Use undue effort to force the block to operate.
? Throw, drop or drag a chain block.
? Allow oil or grease to come into contact with the brake.
? Expose a chain block directly to the elements, water spray, steam etc without consulting the supplier.
Â
Model
CHH005
CHH010
CHH015
CHH020
CHH030
CHH050
CHH100
CHH200
Capacity
t
0.5
1
1.5
2
3
5
10
20
Standard Lift
m
2.5
2.5
2.5
2.5
3
3
3
3
Proof Load
kN
7.5
15
22.5
30
45
75
150
250
Effort Required to Lift Rated Load
N
262
304
395
330
402
415
428
428x2
No. of Falls of Load Chain
1
1
1
2
2
2
4
8
Load Chain
mm
5x15
6x18
8x24
6x18
8x24
10x30
10x30
10x30
Dimensions (mm)
A
124
137
143
137
153
173
173
225
B
135
160
185
170
200
248
395
650
C
300
320
400
459
536
650
770
1000
D
35
37
45
48
50
65
80
108
K
27
25
35
35
36
46
55
80
Company information:
H-Lift, an ISO 9001 certified firm by Lloyd's Register and a member of LEEA(Lifting Equipment Engineers Association), specializes in the field of lifting & hoisting equipment, webbing and round sling, Ratchet Tie Down and lashing equipment, chain & chain sling, wire rope and wire rope sling, material handling, rigging hardware & other products.