1.Cold steel materials of the canopy. & Best powder paint. 2.Stainlesssteel locks and hinges. 3. Fireproof,waterproof and dustproof. 4.Good ventilation system and anti-heat radiating structure. 5.Effective anti-vibration devices to ensure the generator set run steadily. 6.Highquality soundproof materials could efficiently reduce noise.(lower than 75-85 dB at 7 meters away) 7.Emergency stop button mounted outside.                       8.Side lockable door easy for maintenance and installation.
9.Lube oil and cooling water drains piped to exterior of the canopy.
10.Access to all weather conditions.
Â
Maintenance features
1.180° revolvable and disassemble door for easy maintenance. 2.Concave lockable access door for easy operation and indefectible. 3.Lights inside of the canopy for maintenance.
Â
Security and Safety
1.Transparent viewing window make the control panel clear at a glance. 2.Emergency stop button mounted on the canopy exterior for urgency. 3.Cooling fluid injection hole is kept on the ceiling crust.
4.Pipe of lube oil and cooling fluid is mounted on the bottom of generator for easy let.
5.Fuel fill and battery can easy be accessed by lockable door.
6.Cooling fan and battery are fully guarded.
7.Heat insulation of exhaust smoke system inside the canopy.
1. GENERATOR DATAÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Voltage Available:Â
50Hz: 380-400-415V/220-230-240V;
60Hz: 220-380-416-440-480V/110-208-220-240V
Any special voltage is also available as client's request
Prime Power:Â
Comply with GB/T2820-97(eqv.ISO8528).Â
Genset can run unlimitedly under certain power range.Â
One hour 10% over load in every 12 running hours is allowed;
Standby Power:
standby power is the limit value of maximum output for emergency use.Â
ISO CE TUV UL SGS BV CCS approved quality certificates
Â
Construction features
1.Cold steel materials of the canopy. & Best powder paint. 2.Stainlesssteel locks and hinges. 3. Fireproof,waterproof and dustproof. 4.Good ventilation system and anti-heat radiating structure. 5.Effective anti-vibration devices to ensure the generator set run steadily. 6.Highquality soundproof materials could efficiently reduce noise.(lower than 75-85 dB at 7 meters away) 7.Emergency stop button mounted outside.                       8.Side lockable door easy for maintenance and installation.
9.Lube oil and cooling water drains piped to exterior of the canopy.
10.Access to all weather conditions.
Â
Maintenance features
1.180° revolvable and disassemble door for easy maintenance. 2.Concave lockable access door for easy operation and indefectible. 3.Lights inside of the canopy for maintenance.
Â
Security and Safety
1.Transparent viewing window make the control panel clear at a glance. 2.Emergency stop button mounted on the canopy exterior for urgency. 3.Cooling fluid injection hole is kept on the ceiling crust.
4.Pipe of lube oil and cooling fluid is mounted on the bottom of generator for easy let.
5.Fuel fill and battery can easy be accessed by lockable door.
6.Cooling fan and battery are fully guarded.
7.Heat insulation of exhaust smoke system inside the canopy.
1. GENERATOR DATAÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Voltage Available:Â
50Hz: 380-400-415V/220-230-240V;
60Hz: 220-380-416-440-480V/110-208-220-240V
Any special voltage is also available as client's request
Prime Power:Â
Comply with GB/T2820-97(eqv.ISO8528).Â
Genset can run unlimitedly under certain power range.Â
One hour 10% over load in every 12 running hours is allowed;
Standby Power:
standby power is the limit value of maximum output for emergency use.Â
In an angled Globe Valve, the fluid only needs to be changed once so that the pressure drop through this valve is smaller than that of a conventionally constructed shut-off valve.
The Angle Globe Valve opening and closing member is a plug-shaped valve flap, the sealing surface is a plane or a cone surface, and the valve flap moves linearly along the centerline of the fluid. The valve stem is in the form of a lifting rod (the stem is raised and lowered, the hand wheel is not lifted), and there is also a lifting and rotating rod type (the hand wheel rotates and lifts together with the valve stem, and the nut is arranged on the valve body). The tube cut-off valve is only suitable for full-opening and full-closing and does not allow for adjustment and throttling.
Angle Globe Valve
Angle Globe Valve,Cast Iron Angle Globe Valve,Angle Type Globe Valve,Cast Steel Angle Globe Valve
