Pneumatic diaphragm pump is a new type of conveying machinery, is currently the most novel kind of pump. The use of compressed air as the power source, for a variety of corrosive liquids, with particles of liquid, high viscosity, volatile, flammable, highly toxic liquid can be smoked exhausted. Pneumatic diaphragm pump has four materials: plastic, aluminum, cast iron, stainless steel. Diaphragm pumps are based on different liquid medium were nitrile rubber, neoprene, fluorine rubber, PTFE, polyhexamethylene. To meet the needs of different users. Placed in a variety of special occasions, used to pump a conventional pump can not be aspirated medium, have achieved satisfactory results.
Because of the above characteristics of pneumatic diaphragm pumps, diaphragm pumps in the world have been gradually invaded and occupied some of the other pump markets since their inception. Such as: paint, diaphragm pumps in the ceramic industry has occupied an absolute dominance, while in other industries, such as environmental protection, wastewater treatment, construction, sewage, fine chemicals is expanding its market share, and has other pumps irreplaceable Position.
The advantages of pneumatic diaphragm pump 1, due to the use of air as power, so the flow rate with the back pressure changes automatically adjusted for the viscosity of the fluid. Centrifugal pump operating point is set on the basis of water, if used for slightly higher viscosity fluid, you need to support reducer or inverter, the cost has greatly improved, the same is true of the gear pump.
2, in a flammable and explosive environment with pneumatic pump reliable and low cost, such as fuel, gunpowder, explosives, because: First, the ground is not likely to spark; second, no heat during work, the machine is not Will overheat; thirdly, the fluid will not overheat because the diaphragm pump agitates the fluid to a minimum.
3, the other diaphragm pump is small and easy to move, do not need foundation, accounting for the ground is very small, easy and economical installation. Can be used as mobile material transfer pump.
4, poor construction sites, such as construction sites, industrial and mining wastewater discharge, due to the impurities in the sewage and the composition of complex, easy to plug the pipeline, so the formation of the pump on the load is too high, the motor heat vulnerable. Pneumatic diaphragm pump through the particles and the flow rate can be adjusted, the pipeline automatically stop blocked to patency.
5, or some experiments to ensure that no impurities pollute the raw materials.
6, can be used to transport the chemical properties of relatively unstable fluids, such as: photographic materials, flocculation and so on. This is because diaphragm pumps have low shear forces and little physical impact on the material.
7, in hazardous, corrosive materials handling, diaphragm pump material can be completely separated from the outside world.

More Search Keywords: Pumps

Filter Element

Filter Discs And Packs,Wire Mesh Disc,Ss Strainer Filter,Metal Filter Disc

glorybest industry co.,ltd , https://www.nbhbglorybest.com