At 23:51 on March 26, the ignition torch of the Anqing Petrochemical coal gasification unit was successfully ignited. At 0:21 on the 27th, the split burners ignited smoothly, and at 0:54 pm, four coal burners were ignited one after another, and the coal gasification of the chemical fertilizers began. The unit was successfully put into operation. Day 3:27 methanol wash sequence, 7:00 methanol scrubbing the process gas outlet of the CO2 content qualified, thus, coal gasification plant fertilizer into normal operation, hydrogen is provided for the refinery conditions.

This time, Anqing Petrochemical's chemical fertilizers were driven by the attention of the branch leaders. The general manager of the branch Wang Hao, deputy general manager Cheng Lei, deputy general manager Liu Xiaohua and relevant department leaders coordinated and directed the drive. In the process of driving, the Ministry fully promoted the spirit of “mainly based on me and overall responsibility”, worked overtime, worked continuously, and researched in a timely manner to solve the problem of unsatisfactory heat transfer efficiency of the air separation plate heat exchanger exposed during driving. The changes in the dry gas components used in the Ignition cause problems such as unsuccessful ignition, and together with relevant experts and emergency repair units, they carefully analyzed the causes, actively formulated countermeasures, and implemented the solution measures. They continuously fought to drive the site on a 24-hour basis and successfully solved various problems and ensured that The device runs smoothly.

In order to ensure the company's overall material supply balance, the Fertilizer Department actively carried out the unloading of ammonia during the drive. Up to now, more than 700 tons of ammonia has been unloaded, effectively ensuring the demand for ammonia. At present, the pre-work section of fertilizers is busy in the optimization of work conditions after the vehicle is started. The follow-up device is progressing and is expected to produce ammonia at 19:00 on the 27th.

CNC Aluminum Spare Part

CNC Aluminum Spare Part is those parts manufactured by CNC machine directly.It can greatly save the tooling cost if the required quantity of the parts is only in sample stage.CNC Aluminum Spare Part is precise in the dimension and the cutting burr is perfect.Also CNC Aluminum Spare Part surface can be better protected .It can fabricate small size Aluminum Sheet or spare parts. CNC Aluminum Spare Part is more precise of external dimension. The tolerance of the size is very small.

CNC milling Aluminum spare part, CNC Aluminum spare part,CNC Aluminum alloy spare part

Trumony Aluminum Limited , https://www.szaluminumplate.com