Cnm Post Tension Accessories Grout Pump and Mixer

September 13 22:01:55, 2018

Model NO.: CNM-HB
Vibrating Amplitude: 2.0mm
Certification: ISO9001: 2000
Condition: New
Color: Yellow, Green, Blue, White, Red, etc.
Maximum Output Capacity: 3m3/H
Application: Bridge, Buildings, Tunnel, Highway and Railway
Output Capacity: Can Be Customized
Rolling Speed: 1440r/Min
Vertical Conveying Height: 40m
Cement Output Hose Diameter: 64mm
Power: 4kw
Working Pressure: 1.5MPa
Weight: 250kg
Over Dimensions: 1035*480*900mm
Trademark: CNM
Specification: SGS, ISO9001-2008, BV
Origin: Hennan Province
HS Code: 847480909
CNM Post Tension Accessories Grout Pump and Mixer

1. Model: CNM-HB Series.

2. Motor Voltage: Three Phase, 380V, 50hz, or Single Phase, 220V, 50Hz.

3. Usage: For grouting cement(or concrete) to tunnel of ducts in post tensioning and prestressing construction.

4. Features: 

1). Grout pump is a kind of machine which can press slurry into tensioning channels, including into two ways of working plunger and screw. It pressed slurry into Prestressing tensioning channel, so as to achieve the purpose of bonding and corrosion. 

2.) Motor drive reducers, driving the piston or plunger for reciprocating motion, through the one-way control effects from pulse pressure grout.

3). Good quality with high performance, lone life usage, easy operation, etc.

5. Applications: 

It has been widely adopted by modern construction, especially used in pre-tension or post-tension for concrete constructions as building materials, such as bridge construction, railway and highway construction,  underground structures,buildings and channel construction, ect. 





6. Technical Data For HB Grout Pump:

1,Delivery Output(flow):                                        3m/h 

2,Vertical conveying distance:                            40m 

3,Horizontal delivery distance:                           150m

4,Working pressure                                             1.5Mpa

5,Electric Power:                                                    4KW

6,Electric Engine Rolling Speed:                       1420r/min

7,Repeated Time:                                                 150/min

8,Hose Diameter of Grouting Output Mouth:   51mm(1.2")Length: 5m

9,Hose Diameter of Grouting Entering Mouth: 64mm(2.5")length: 4m

10,Weight:                                                               250KG

11,Over Dimensions:                                           1035*480*900mm


 
7. CNM-JB Series Grout Mixer Machine: 

CNM-JB Seires of Grout Mixer Machine Features: 
 
1.JB serious mixer is designed and machined multifunctional mixer which are used with the HB3 type and 2HB6 type mortar pump. 

2.It can be used for various construction and maintenance, such as building, metallurgy, railway, bridge, Prestressing units etc. 

3.The mixer has small volume and light weight, so that it's easy to installing and handling. For the previous mixer, the mortar of easy sedimentary bottom is not easy clear. So we designed the punch forming funnel type mixer, and lengthened the mixer's working life.


4. Technical Data For CNM-JB Series Grout Mixer Machine:

1),Volume(capacity):               180 L 

2),Power:                                   2.2 KW

3),Rotate Speed:                     70r/min

4),Weight:                                  200 Kg

5),Output(Flow) for Mixing:      6 m/h

6),Material loading height:      980 mm

7),Over Dimensions:               1000*1140 mm 





8. Our Advantages:


We are PT Manufacturer from China, our full products range for post tensioning and pre-strssing construction:
 
1). Materials: pc strand, YJM anchor system(monostrand anchor, multistrands anchor), ducts(metal ducts, HDPE plastic ducts).
 
2). Equipment: Hydraulic Jack(QYC mono jack, YDC multi-strand tensioning jack), electric oil pump, YH30 embossing machie(onion jack), GYJ500 extrusion machine, ZG130 ducts making machine, grouting pump and mixer for post tensioning).
 
3). Bridge Equipment: Bridge Crane, Bridge Girder Launching Machine, Bridge Girder Transporting Vehicle, etc.



9. FAQ:
 
1). Q: What information should provide before placing order?
We are appreciated you provide us detail information about your requirement:
1. What is your required Maximum Output Capacity and Rated Pressure?
2. What Voltage do you use in your worksite?
3. What is your required Destination Port?
 
2) Q: How is the delivery lead time:
A: Goods in stock: within 3 days, Goods out of stock(7 days), Goods need to be customized(10-15 days).
 
3) What is your Minimum Order?
A: MOQ: 100 pieces.
 
4) Q: Payment Terms?
A TT, LC, Western Union, Paypal, etc.
 
5) Q: How to transport the goods:
A: by shipping, airflight, express.

Let's have a quick communications for business by following:
Mobile  Phone No.: +8613673713569
Jason Wang


Injection Molding Machine For Plastic Fitting

Plastic Injection Molding Machine,Multi-Material PVC Injection Molding Machine,Plastic Lamp Accessories

AD Plug,Plastic Fitting Co., Ltd. , http://www.cnplastic-injection.com