Model NO.: LP-188
Carbon Steel Forged Part Heat Treatment: Quenching
Carbon Steel Forged Part Tolerance: 0.5mm, Machining:0.05mm, Finish Machining:0.005mm
Carbon Steel Forged Part Mould Time: 35days
Carbon Steel Forged Part Shipping Date: 45days After Receiving Deposit
Trademark: LP/OEM
Transport Package: Wooden Box
Specification: 42CrMo
Origin: China
HS Code: 8409992000
Model NO.: LP-188
Carbon Steel Forged Part Heat Treatment: Quenching
Carbon Steel Forged Part Tolerance: 0.5mm, Machining:0.05mm, Finish Machining:0.005mm
Carbon Steelthe Weights of Forging Parts: 0.50kgs -Â 80kgs.
Carbon Steel Forged Part Mould Time: 35days
Carbon Steel Forged Part Shipping Date: 45days After Receiving Deposit
Trademark: LP/OEM
Transport Package: Wooden Box
Specification: 42CrMo
Origin: China
HS Code: 8409992000
Forged and machined steel parts for automobile industry
We also Supply: Engine system: Connecting rod; TDCI; Fuel injector; Rockshaft; Turbine disk; flying wheel panel
TCM :Wheel gear: Output shaft; Clutch lining; Final drive hub
Train-bridge system: Spline shaft; Cardan  joint; Flange yoke;
Sleeve fork
Transmission system: Bent axle; Camshaft ;Hub
Steering system: Steering knuckle; Steering arm shaft; Control arm
Shock mitigation system: iron teeth
Suspension system: Lifting lug; Set bar; Latch hook; Top and bottom yoke plate; Draft arm
Air conditioning and exhaust system: Turbine; Vortex plate ;Flange
Engineering parts: Track link section; Oil cylinder accessories; Crawler accessory; Forklift truck beam; Bolt seat ;Joint bearing; Shaft block
Railway parts: Press plate; Depression bar; Turnout
Agricultural mechanization system: Three-point linkage; Tool bit; Shaft block; Link joint
Scaffold: Bowl; Cotter
SAE Flanges: Be used for ship, metallurgy, offshore oil, Hydraulic tubing oil cylinder. Engineering machinery
Forged and machined steel parts for automobile industryÂ
Production description:
| The weights of Forging parts |
0.50kgs -Â 80kgs. |
| Machining |
Turning, cutting, milling, grinding, drilling, reaming and threading. |
| Tolerance:Â |
0.5mm, machining:0.05mm, finish machining:0.005mm |
| Surface Treatment |
Shot blasting, painting, chrome plating ,Oil, spraying, galvanization |
| Material |
Carbon steel, Stainless steel, Alloy Steel, aluminum alloy, Copper etc |
| Product Processes |
Die forging, stamping Casting, heat treatment, shot blasting ,deburring, Machining, Surface Treatment, Packing, all per request.
 |
| (Made according to customers' drawing, specification and /Â or samples) |
| Specification: OEM & Custom According to  Drawing or Samples |
Forged and machined steel parts for automobile industryÂ
Equipment:Tooling workshop:
FV-2215 Machine center,
CNC Machine center,
CNC Milling machine,
Electric-spark processing machine
Forging workshop:
1000T Friction press,
630T Friction press,
400T Friction press,
500TCutting machine,
Sawing machine, 630T Hot press forging automatic line, Circular saw, 1600T Hot press forging automatic line, 5T Hydraulic die forging hammer
Machining workshop : THMC6350 Machining Center,
HAAS CNC Machining Center,
LGMAZAK CNC Lathe,
CKA6180A
Heat treatment equipment:
Chained continous atmosphere protect quenching & tempering furnace,
Isothermal normalizing furnace
Testing equipment:
Groma08.10.06 CMM,
JB-300B Impact testing machine,
WAW-300G Hydraulic Universal Tester,
4XC-V Metallurgical microscope,
LAB SPARK750 Spectrum analyzer,
HB,
HRC,
Ultrasonic flaw detector,
Magnetic Particle Detector,
Profile Projector,
Profile meter + Roughness Tester,
Roughness Tester,
Deflection Tester
Forged and machined steel parts for automobile industryÂ
Packing and Delivery:1. Original packing: anti-rust bag-Box-Carton-Wooden Case(According to your requirements)
2. Delivery date: 3-7 days for stock order and 30-60 days for production
3. Delivery ways: Small weight by TNT/DHL/FEDEX and other competitive air express;Big quantities by sea shipment
Why Choose Us?1:24years experience in forging field.
2: AÂ number of technical backbone workers have worked for more than ten years in the company.
 3: Advanced, well-equipped production equipment and testing facilities.
4: 15000T production capacity per year.
5: ISO14001:2004 ; OHSAS18001:2007; ISO/TS 16949:2009; Lloyd's Register; GL Certificate
6: From the mold design and production -- forging -- heat treatment -- mechanical processing, complete production chain .
7:Sign Confidentiality agreement ,ensure your Intellectual Property.
8: Select high quality material supplier ,
100% inspection each produce process,, do strict quality control and best service for customers.
9: One year gurantee, Long working life
10: Professional &Â excellent pre-sales, sales and after-sales service.
11: One-stop service. We can supply with various spare parts for your need,  save your time to search the parts if you need in urgent.
12: Competitive price $Â Timely delivery
FAQQ: Are you trading company or manufacturer ?A: We are factory.
Q: How long is your delivery time?A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q: Do you provide samples ? Is it free or extra ?A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q:How about the mould fee?A:We can return the mould fee to you when your quantity arrive our standard.
Q: What is your terms of payment ?A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance ,balance before shippment.
Q. What is your terms of delivery?A: EXW, FOB, CFR, CIF, DDU.
Q. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
If you have another question, pls feel free to contact us as below:Â
Forged and machined steel parts for automobile industry
We also Supply: Engine system: Connecting rod; TDCI; Fuel injector; Rockshaft; Turbine disk; flying wheel panel
TCM :Wheel gear: Output shaft; Clutch lining; Final drive hub
Train-bridge system: Spline shaft; Cardan  joint; Flange yoke;
Sleeve fork
Transmission system: Bent axle; Camshaft ;Hub
Steering system: Steering knuckle; Steering arm shaft; Control arm
Shock mitigation system: iron teeth
Suspension system: Lifting lug; Set bar; Latch hook; Top and bottom yoke plate; Draft arm
Air conditioning and exhaust system: Turbine; Vortex plate ;Flange
Engineering parts: Track link section; Oil cylinder accessories; Crawler accessory; Forklift truck beam; Bolt seat ;Joint bearing; Shaft block
Railway parts: Press plate; Depression bar; Turnout
Agricultural mechanization system: Three-point linkage; Tool bit; Shaft block; Link joint
Scaffold: Bowl; Cotter
SAE Flanges: Be used for ship, metallurgy, offshore oil, Hydraulic tubing oil cylinder. Engineering machinery
Forged and machined steel parts for automobile industryÂ
Production description:
| The weights of Forging parts |
0.50kgs -Â 80kgs. |
| Machining |
Turning, cutting, milling, grinding, drilling, reaming and threading. |
| Tolerance:Â |
0.5mm, machining:0.05mm, finish machining:0.005mm |
| Surface Treatment |
Shot blasting, painting, chrome plating ,Oil, spraying, galvanization |
| Material |
Carbon steel, Stainless steel, Alloy Steel, aluminum alloy, Copper etc |
| Product Processes |
Die forging, stamping Casting, heat treatment, shot blasting ,deburring, Machining, Surface Treatment, Packing, all per request.
 |
| (Made according to customers' drawing, specification and /Â or samples) |
| Specification: OEM & Custom According to  Drawing or Samples |
 and machined steel parts for automobile industryÂ
Equipment:Tooling workshop:
FV-2215 Machine center,
CNC Machine center,
CNC Milling machine,
Electric-spark processing machine
Forging workshop:
1000T Friction press,
630T Friction press,
400T Friction press,
500TCutting machine,
Sawing machine, 630T Hot press forging automatic line, Circular saw, 1600T Hot press forging automatic line, 5T Hydraulic die forging hammer
Machining workshop : THMC6350 Machining Center,
HAAS CNC Machining Center,
LGMAZAK CNC Lathe,
CKA6180A
Heat treatment equipment:
Chained continous atmosphere protect quenching & tempering furnace,
Isothermal normalizing furnace
Testing equipment:
Groma08.10.06 CMM,
JB-300B Impact testing machine,
WAW-300G Hydraulic Universal Tester,
4XC-V Metallurgical microscope,
LAB SPARK750 Spectrum analyzer,
HB,
HRC,
Ultrasonic flaw detector,
Magnetic Particle Detector,
Profile Projector,
Profile meter + Roughness Tester,
Roughness Tester,
Deflection Tester
Forged and machined steel parts for automobile industryÂ
Packing and Delivery:1. Original packing: anti-rust bag-Box-Carton-Wooden Case(According to your requirements)
2. Delivery date: 3-7 days for stock order and 30-60 days for production
3. Delivery ways: Small weight by TNT/DHL/FEDEX and other competitive air express;Big quantities by sea shipment
Why Choose Us?1:24years experience in forging field.
2: AÂ number of technical backbone workers have worked for more than ten years in the company.
 3: Advanced, well-equipped production equipment and testing facilities.
4: 15000T production capacity per year.
5: ISO14001:2004 ; OHSAS18001:2007; ISO/TS 16949:2009; Lloyd's Register; GL Certificate
6: From the mold design and production -- forging -- heat treatment -- mechanical processing, complete production chain .
7:Sign Confidentiality agreement ,ensure your Intellectual Property.
8: Select high quality material supplier ,
100% inspection each produce process,, do strict quality control and best service for customers.
9: One year gurantee, Long working life
10: Professional &Â excellent pre-sales, sales and after-sales service.
11: One-stop service. We can supply with various spare parts for your need,  save your time to search the parts if you need in urgent.
12: Competitive price $Â Timely delivery
FAQQ: Are you trading company or manufacturer ?A: We are factory.
Q: How long is your delivery time?A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q: Do you provide samples ? Is it free or extra ?A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q:How about the mould fee?A:We can return the mould fee to you when your quantity arrive our standard.
Q: What is your terms of payment ?A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance ,balance before shippment.
Q. What is your terms of delivery?A: EXW, FOB, CFR, CIF, DDU.
Q. Can you produce according to the samples?A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
If you have another question, pls feel free to contact us as below:Â
Forging parts
Axle Bush,Stainless Steel Axle Bush,Forged Stainless Steel Axle Bush
Precision Engineering Co., Ltd. , http://www.njdiecasting.com