Gear drive: AMT transmission developed independently
In the implementation of the independent innovation and development strategy, Qijiang Gear Transmission Co., Ltd. follows the world's automotive cutting-edge technologies, and continuously accelerates the development of high-tech technologies, product automation, product lightening, energy conservation and environmental protection, and market diversification to connect the pace of international automotive development. Continue to lead the domestic passenger car transmission market. A few days ago, the independently researched and developed AMT transmission technology is close to the technology of foreign similar products. It will break the monopoly of foreign countries and fill the gap in the automatic transmission of domestic buses and buses. It is concerned by the news network of the Chongqing TV station.
Tower Crane gear mainly including 19/38/99 teeth gear, bevel gear, Tower Crane Sun Gear, and so on, which are the critical
parts of the tower crane reducer. 19 teeth gear and 38 teeth gear are
connected with two motor shaft repectively, which are connected with 99
teeth gear. The speed is reduced by the transmission of gears.
A bevel gear is a type of gear that has teeth cut on a conical surface. It is commonly used in tower cranes to transmit power between the vertical and horizontal shafts. Bevel Gear,Tower Crane Sun Gear,Crane Pinion Gear,Tower Crane Transmission Gear,Tower Crane Drive Shaft SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com
On the afternoon of April 5th, Huang Yi, deputy secretary of Party Committee and secretary of the Disciplinary Committee of Zhangye Gear Company, Zhang Yu, deputy general manager of the company, and related personnel of the Product Development Department, Personnel Administration Department, and Party and Group Work Departments accepted the column of the News Broadcasting Section of Chongqing TV Station. Interview. Zhang Yu, the deputy general manager of the company, introduced to the column group the actual results achieved in the implementation of the independent innovation and development strategy.
Chongqing TV station's Wang Huan, the host of the Chongqing TV station's experience in the test bus of AMT's self-developed AMT mechanical automatic transmission configuration, said that the CMT AMT transmission technology is used in buses and buses compared to traditional passenger cars. It has no shift levers and clutch pedals. The automatic shifting, like the automatic car, can greatly reduce the labor intensity of the driver, and the fuel consumption can save 30% compared with the same period of last year.
The column group also visited the Fang tooth exhibition hall, conducted an on-site interview at the R&D site of the transmission assembly assembly production site of the final assembly plant, and the AMT design office of the product development department, and experienced the experience of AMT transmission test buses for tooth gear transmission company.
The S6-150AMT transmission, a representative of AMT transmission products of Fangya Transmission Co., Ltd., was exhibited at the "Industrial Light--Changan Automobile Technology Special Exhibition" co-organized by the Chongqing Science and Technology Museum and Changan Automobile Co., Ltd. recently and was attended by Chongqing Municipality. The mayor, Huang Qifan, and the delegates attending the conference and the Chongqing citizens visited were widely concerned. The AMT transmission exhibited at this section allows the public to feel the feel of speed at ease.
In a tower crane, the bevel gear is typically used to change the direction of rotation. The vertical shaft, which is connected to the motor, rotates vertically, while the horizontal shaft, which is connected to the crane's boom, rotates horizontally.
The bevel gear consists of two gears with intersecting axes. The teeth on the gears are cut at an angle, allowing them to mesh smoothly and transmit power. The gear ratio of the bevel gear determines the speed and torque of the rotation.
The bevel gear in a tower crane is designed to withstand heavy loads and provide efficient power transmission. It is usually made of high-strength steel to ensure durability and reliability in demanding crane operations.
Overall, the bevel gear plays a crucial role in the functioning of a tower crane by enabling the transfer of power and changing the direction of rotation between the vertical and horizontal shafts.