Introduction of magnetic separator

 Magnetic separation is a continuous process by which magnetic material is separated from non-magnetic material. The mixture of magnetic and non-magnetic material is passed through a strong magnetic field. Magnetic material is magnetized and gets attracted to the surface of the separator and is discharged in a chute.

The efficiency of the separator depends upon the strength of the magnet and the speed of the conveyor. The length of the magnet is designed such that the magnetic material is in the magnetic field for a period of 0.4 to 0.5 secs. Strontium Ferrite permanent blocks are used in the magnet assembly to achieve a surface gauss of 2500.

The gap between the magnet and the conveyor is adjustable. Lower the gap, better the separation efficiency. Individual drive is used for the separator and the conveyor. Adjustable stainless steel splitters are provided between the two chutes. Vibrating feeder with two unbalance motor is also provided, which ensures that the material spreads across the belt to achieve better separation. We can supply belt type separators for a belt width of 650 mm to 2000 mm.

Classification of magnetic separator

Electromagnetic Type (with control panel):adopts rare earth magnet and ferrite magnet to form its permanent magnetic system

Permanent Type (without control panel): adopts excitation coils to form its electromagnetic system. magnetic separator is usually used in continuous duty occasions with plenty of iron materials.

Discharging Type of magnetic separator

Manual Discharge Type (without motor and belt)

Self-Discharging Type (with motor and belt)

Cooling Type: (just for electromagnetic type)
--Air Cooling 
--Oil Cooling
--Fan Cooling

Operating Principle
The magnetic & nonmagnetic material is passed under the Magnetic Separator by a conveyor. The mixture is fed on to the conveyor evenly by the help of a feeder. Under the influence of the magnetic field the magnetic material is attracted upwards, towards the magnet face. The attracted material is carried along the cleated belt of the Separator and is continuously discharged in the magnet chute. The other material with is carried by the bottom conveyor and discharged in the non mag chute.

Features of magnetic separation equipment

Application of belt electromagnetic separation

widely used in mining ore, limestone, hard coke, cement, chemicals, plastics, coal, refractory , building materials, food and other industries.

Components of magnetic separator

Permanent magnetic plate, Belt , Motor, Iron frame.

Sketch installation drawing of magnetic separator

Technical Data of  magnetic separator

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant

Contact Information

Introduction of magnetic separator

 Magnetic separation is a continuous process by which magnetic material is separated from non-magnetic material. The mixture of magnetic and non-magnetic material is passed through a strong magnetic field. Magnetic material is magnetized and gets attracted to the surface of the separator and is discharged in a chute.

The efficiency of the separator depends upon the strength of the magnet and the speed of the conveyor. The length of the magnet is designed such that the magnetic material is in the magnetic field for a period of 0.4 to 0.5 secs. Strontium Ferrite permanent blocks are used in the magnet assembly to achieve a surface gauss of 2500.

The gap between the magnet and the conveyor is adjustable. Lower the gap, better the separation efficiency. Individual drive is used for the separator and the conveyor. Adjustable stainless steel splitters are provided between the two chutes. Vibrating feeder with two unbalance motor is also provided, which ensures that the material spreads across the belt to achieve better separation. We can supply belt type separators for a belt width of 650 mm to 2000 mm.

Classification of magnetic separator

Electromagnetic Type (with control panel):adopts rare earth magnet and ferrite magnet to form its permanent magnetic system

Permanent Type (without control panel): adopts excitation coils to form its electromagnetic system. magnetic separator is usually used in continuous duty occasions with plenty of iron materials.

Discharging Type of magnetic separator

Manual Discharge Type (without motor and belt)

Self-Discharging Type (with motor and belt)

Cooling Type: (just for electromagnetic type)
--Air Cooling 
--Oil Cooling
--Fan Cooling

Operating Principle
The magnetic & nonmagnetic material is passed under the Magnetic Separator by a conveyor. The mixture is fed on to the conveyor evenly by the help of a feeder. Under the influence of the magnetic field the magnetic material is attracted upwards, towards the magnet face. The attracted material is carried along the cleated belt of the Separator and is continuously discharged in the magnet chute. The other material with is carried by the bottom conveyor and discharged in the non mag chute.

Features of magnetic separation equipment

Application of belt electromagnetic separation

widely used in mining ore, limestone, hard coke, cement, chemicals, plastics, coal, refractory , building materials, food and other industries.

Components of magnetic separator

Permanent magnetic plate, Belt , Motor, Iron frame.

Sketch installation drawing of magnetic separator

Technical Data of  magnetic separator

Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.

With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.

Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc.. 
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant

Contact Information

Ceiling Type Air Handling Unit

Air flow 1,000m3/h-30,000m3/h, Coil type 4rows/6rows/8rows

Characteristics:
1.Air handing unit applies colorful steel and galvanized panel as its interior and exterior panel. Inner stuff is the high density polyurethane foam,double pillar and tenon structure that ensures the strength of the unit and low air leakage.
2.High efficiency and low resistance nylon filter that reduce the power consumption obviously. Easy cleaning and simple operation; at the same time, higher level panel filter is optional too.
3.Coil applies pure and seamless copper tube and hydrophilic aluminum fin. Copper tube is under 12MPa water pressure expanding that can adapt to all kind of high pressure and no leakage, as well as ensure the lowest contact thermal resistance and highest heat transfer efficiency.
4.All fans in the unit are selected by professional software to ensure the best condition. Minimize the air volume and air pressure loose after meeting with the customer's requirements. Also ensure the good airflow and reduce the air duct noise.
5.Ceiling type air handling unit wish small size, low noise. It is widely applied in the comfortable Air Conditioning system such as the hostel, commercial building, office and underground railway application.

Ceiling Type Air Handling Unit

Ceiling Type Air Handling Unit,Ceiling Suspended Air Handling Units,Ceiling Vertical Type Air Handling Unit,Ceiling Concealed Type Air Handling Unit

Jinan Amrta Air Conditioning Co.,Ltd , https://www.waterchiller.pl