HK-Hfrr-001 High Frequency Reciprocating Friction and Wear Testing Machine
The sector belt of the turning belt
conveyor is equipped with a special anti deviation roller (POM is added
to the bearing) or high-frequency welding guide ribs are welded on the
outside of the conveyor belt to make the conveyor belt run in a special
guide rail. The roller adopts a special conical rubber wrapping roller.
The turning Belt Conveyor can transport a wide variety of materials, not
only various bulk materials, but also various cartons, packaging bags
and other pieces of goods with small single weight, which are widely
used. Turning Conveyor,Turning Belt Conveyor,Roller Turning Machine,Assembly Line Automation Equipment Foshan Heiteng Intelligent Technology Co., Ltd , https://www.fsheitengproductionline.com
     (Diesel Fuel Lubricity Tester )
Overview
 HK-HFRR-001 conforms to ASTM D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR).The machine can be used in evaluation of diesel oil within high frequency reciprocating condition ( including lubricant containing diesel lubricating ). Can also be used for detection of lubricating oil and grease lubrication performance, and on the oil film thickness measurement.
Â
Features
1. Electromagnetic actuator:Energy conservation, stable and high control precision (no vibration and thrust is easy to control)
2. Push rod design:Push rod design adopts composite and custom made slide way, it features no transverse interference, high straightness of reciprocating motion displacement, stable displa cement and good epeatability.Â
3. Oil box design:Oil box design adopts 2ml marked line, convenience to add the oilÂ
4. Steel ball chuck:Steel ball chuck is convenience to dismantle
5. Heater:Heater adopts PTC ceramic chip, it features uniform heating, safe, long service life, no replacementÂ
6. Sample steel ball: Diameter:6 mm,Diameter:6 mm,material conforms to ANSIE-52100 28th grade steel of ANSIB3.12, HRC: 58-66, Ra<0.05μm
7. Test Piece:Round steel which conforms to AISIE-52100 standard HV30:190-210,Ra<0.02μm
8. The whole system is installed to a steel pedestal to reduce the inner extra vibration
Â
Software main function:Â
1. Whole process monitoring of each parameter and data sampling period storage
2. Set the test parameter: Stroke length, reciprocating frequency, friction, test temperature and test time. It also can do the course setting to each parameter.
3. Control the mechanical part running time, it can keep monitoring the stroke length, reciprocating frequency and sample temperature. When the temperature is at the set value, the test will start till it reaches to the test time
4. Record and display the measuring result: Friction average value, oil film value and the relevant curve It can do the microscope communication to the wear scar measurement, call the wear picture and data directly to generate the test result and print
5. Wear scar measuring system:Magnification: 100 times, accuracy: 1μm. Computer captures the wear scar picture, measure the scar size and save the data. There is communication interface
Â
Technical Parameters
1. Reciprocating frequency:  10~60 Hz  Accuracy:1Hz
2. Reciprocating stroke:  0.01~2.5 mm  Accuracy: 0.001mm
3. Test temperature: Room temperature~200ºC  Accuracy:2ºC
4. Load: 0.1~1KgÂ
5. Maximum friction: 30N
6. Test ball: Diameter:6 mm, material conforms~ANSIE-52100 28th grade steel of ANSIB3.12, HRC: 58-66, Ra<0.05μm
7. Test piece: Round steel which conforms~AISIE-52100 standard HV30:190-210, Ra<0.02μm Oil bath area: 600±100 mm2
8. Wear scar measuring system: Microscope, Magnification:100 times Division:1μm
9. Constant temperature and constant humidity chamber:Â
    Temperature control range: 23~30ºC, Temperature display accuracy:0.1ºC,Â
    Temperature control accuracy:±2ºC    Â
    Humidity control range: 40~70%, Humidity display accuracy:1%,Â
    Humidity control accuracy≤3%RH
10. Ambient temperature: 5~35ºC
11. Ambient humidity: 20~80%
Â
Test condition parameter:Â
1. Reciprocating displacement/mm   1.0±0.02
2. Reciprocating frequency/Hz   50±1
3. Applied load/g   200±1
4. Oil sample volume/ml   2±0.2
5. Sample temperature/ºC   60±2
6. Test time/min  75±0.1