Car sealant strip is one of the important parts of the car. It has the function of sound insulation and sealing. It is applied to the door, window, trunk, etc. After long time use, the seal will age and the effect will be greatly reduced. How to replace it? ? Let's take a look.

  1. Clean and dry the parts where the soundproof sealing strip needs to be installed and the flat position of the sealing strip.

  2, select the paste position, find the paste starting point, start at the beginning of the seal, and press a little bit to paste, pay attention not to pull the seal strip a little, try to keep the original shape of the seal slowly aligned. The path is carefully pasted; at the corner of the knot, the seal should be softly curved and not bent too quickly to affect the appearance. In addition, do not stick other dust and other impurities on the 3M adhesive. If you paste it, you can't make an urgent request. This can ensure the effect so that the effect can be guaranteed to ensure the effect.

  3. After all the pastes are in place, check the soundproof strips properly. After a while, press the hand carefully and carefully, and you can finish the work. At this time, try not to close the door. Open the door and wait for 20 minutes, then close the door again, and then wait for 3---5 hours before opening the door for normal use.

  4. After the paste is finished, it is forbidden to pull the seal by hand. It is forbidden to wash the car in 3 days, and try not to open and close the door repeatedly within 24 hours.

Qinghe County Hongfeng Vehicle Parts Co., Ltd. specializes in sealing strips, filter elements, pull wires, etc. Welcome to call 13313392399