Model NO.: all various
Press System: Oil Hydraulic Control System
Piston Stroke: 400mm
Type: General Rubber Machinery
Type of General Rubber Machinery: Rubber Cutter
Type of Tire Machinery: Cycle Tire Machine
Trademark: eenor
Specification: ISO9001: 2008/BV
Origin: Qingdao Shandong
HS Code: 84778000
Model NO.: all various
Press System: Oil Hydraulic Control System
Piston Stroke: 400mm
Type: General Rubber Machinery
Type of General Rubber Machinery: Rubber Cutter
Type of Tire Machinery: Cycle Tire Machine
Trademark: eenor
Specification: ISO9001: 2008/BV
Origin: Qingdao Shandong
HS Code: 84778000
Indoor Or Outdoor Vulcanizing Rubber Tile Floor / Rubber Floor Tile Vulcanizing Machine
Features:
1, we usually design as clients' products and details request. The machine has 4 or 3 working layers, we can also according your needs. And decide the working layers.
2. The machine is matched with manual push-out device.
3, we also can provide the different size of the moulds, from 20mm to 75mm thickness.
4, rubber mixer can also provided, if needed.
5, The press with 12 pcs mould and rubber mixer is only 8m3 of the flooring area, it can be LCL for loading, So the sea freight is very cheap.
The frame type plate vulcanizer applies to vulcanize all kinds of rubber and plastic mould products as well as non-mould products.
The machine is in frame structure with below pressing form (upwards). Under the working hydraulic pressure, the embolism ascends to make hot plate close for getting pressure, while the embolism descends (namely hot plate turning on) by deadweight of hot plate, platform and embolism to drive working fluid to fuel reserve tank to achieve the aim of descending (namely turning on).
Made of nodular cast iron, the oil cylinder of machine is improved in compressive strength and wear resistance. Seal ring made of oil-proof rubber is placed in oil cylinder to have sealing effect in working process of this machine.
Combined oil pump, power source of the machine, provides working fluid with certain pressure. Working fluid enters into oil cylinder by control valve to make control handle on control valve turn to different places, and then embolism is able to ascend or descend.
Adopting tubular electric-heating component to heat up, the machine can reduce air pollution to keep workshop clean without boiler.
The machine is beautiful in shape, rational in structure, convenient in control, safe and credible as well.
Type |
XLB-D550*550*4 |
XLB-D680*810*3 |
| Total pressure(MN) |
0.5 |
1 |
| Plate size(mm) |
550*550*45 |
680*810*60 |
| Plate clearance(mm) |
150 |
150 |
| Working layer number |
4 |
3 |
| Piston stroke(mm) |
400 |
400 |
| Motor power(kw) |
3 |
3 |
| Overall dimension(mm) |
2200*900*2200 |
|
| Weight(kg) |
3600 |
4500 |
we can produce all kinds of rubber machines according to the customer's requirements.
Indoor Or Outdoor Vulcanizing Rubber Tile Floor / Rubber Floor Tile Vulcanizing Machine
Features:
1, we usually design as clients' products and details request. The machine has 4 or 3 working layers, we can also according your needs. And decide the working layers.
2. The machine is matched with manual push-out device.
3, we also can provide the different size of the moulds, from 20mm to 75mm thickness.
4, rubber mixer can also provided, if needed.
5, The press with 12 pcs mould and rubber mixer is only 8m3 of the flooring area, it can be LCL for loading, So the sea freight is very cheap.
The frame type plate vulcanizer applies to vulcanize all kinds of rubber and plastic mould products as well as non-mould products.
The machine is in frame structure with below pressing form (upwards). Under the working hydraulic pressure, the embolism ascends to make hot plate close for getting pressure, while the embolism descends (namely hot plate turning on) by deadweight of hot plate, platform and embolism to drive working fluid to fuel reserve tank to achieve the aim of descending (namely turning on).
Made of nodular cast iron, the oil cylinder of machine is improved in compressive strength and wear resistance. Seal ring made of oil-proof rubber is placed in oil cylinder to have sealing effect in working process of this machine.
Combined oil pump, power source of the machine, provides working fluid with certain pressure. Working fluid enters into oil cylinder by control valve to make control handle on control valve turn to different places, and then embolism is able to ascend or descend.
Adopting tubular electric-heating component to heat up, the machine can reduce air pollution to keep workshop clean without boiler.
The machine is beautiful in shape, rational in structure, convenient in control, safe and credible as well.
Type |
XLB-D550*550*4 |
XLB-D680*810*3 |
| Total pressure(MN) |
0.5 |
1 |
| Plate size(mm) |
550*550*45 |
680*810*60 |
| Plate clearance(mm) |
150 |
150 |
| Working layer number |
4 |
3 |
| Piston stroke(mm) |
400 |
400 |
| Motor power(kw) |
3 |
3 |
| Overall dimension(mm) |
2200*900*2200 |
|
| Weight(kg) |
3600 |
4500 |
we can produce all kinds of rubber machines according to the customer's requirements.
Cosmetics Tote Bag
Paper bag Dimension siza can be customized. Paper bag material is 250gsm white card and black card. Paper bag finishing is lamination and gold foil. Option feature for paper bag are Glossy/matt C2S Artpaper pasted 1.6-3mm thick Paperboard or Glossy white art card paper(300/350/400gsm) and Glod/Silver/Black card paper(300/350/400gsm) and Kraft paper(128/300/350/400gsm)
Cosmetics Tote Bag,Packaging Bags,Paper Bag Packaging,Cosmetics Bag Packaging
Fushan Color Print Co., Ltd , https://www.jsfushanprinting.com