Intelligent three roller gate installation implementation plan
September 01 21:08:40, 2023
The installation of the pedestrian access gate is a professional and serious matter, and the accuracy of the installation is related to the safety and stability of the use. For the installation of the gates, it involves the installation of different models such as intelligent three-roll gates, swing gates, wing gates, etc. Today, Beijing Xi Mo Luo Xiaobian is briefly summarized from the installation of intelligent three-roll gates:
1. Understand the channel gate specifications
The installation of the gate first determines the specifications of the vertical three-roller gate or the bridge three-roller gate, that is, the size of the intelligent three-roller gate, the power size and the power of the access controller and the material of the channel gate movement, and according to the design , determine the number of channels.
2. Channel gate installation and implementation
Understand the installation dimensions of single-channel and dual-channel and multi-channel. Because each intelligent three-roller gate has four fixed points in the bottom plate, it is fixed with the M12 expansion screw and the ground. Therefore, the outlet of the three-roll gate should be reserved in three. At the two ends of the roller shutter chassis, when the pipeline is strong or weak, the dedicated pipeline must be reserved separately. It is recommended to use 25 tubes.
Note: The three-roller gate needs to be equipped with a leakage protector. The total length of a single cable to the server should not exceed 80 meters. The intelligent three-roll gate control system is generally a set of channels to install a two-door controller with two read heads to achieve access. If you add other networked authentication devices, you need to increase the corresponding number of network cables to the server. Reserve two meters after all the wires are out of the ground.
As the name implies, Round Molded Graphiteis a cylindrical product of graphite electrode, which is made of graphite block materials by crushing, screening, batching, shaping, cooling, roasting, dipping and graphitization of post section petroleum coke and medium temperature coal tar pitch. It has the advantages of high temperature resistance, corrosion resistance, good conductivity and light weight. It is mainly used for large DC resistance furnaces, blast furnace bricks, conductive electrodes, lining anti-corrosion and other purposes.
The high-purity graphite, graphite block and Molded Graphite produced by Pingdingshan Carbon Graphite Factory for many years are excellent, and the specifications of Round Molded Graphite are as follows: φ 450*800, φ 520*400 φ 630*420, φ 660*620 φ 780*600, φ 820*350~500 φ 900*350~400, φ 1050*350~400 φ 980~350*400, φ 1160*350~680 φ 1260*350~680, φ 1330*400 φ 1420*400, φ 1520*400 φ 1630*350, φ 1800*350 φ 2000*350, φ 520~2000*680
Round Rod Graphite,Graphite Round Stock,Round Molded Graphite,Graphite Round Square Shape
