Laboratory Environmental Constant Temperature Humidity Climatic Test Equipment
Dry Desulfurization Denitration Crushing Equipment
1.Dry process desulphurization technology is using grinder and conveying fan combination of the grading system, to complete grinding powder spraying device, after smashing the sodium bicarbonate fine powder porous lamellar or shaped, structure, uniform particle size, fineness 200-6000 mesh is adjustable, with good dispersion, and then in solid superfine powder by high pressure centrifugal fan, direct injection into the furnace or in the reaction tower, It can effectively remove more than 95% of SO2 and HC in the tail gas, and the removal rate can reach 99%.
2.The equipment adopts the specialty of domestic and foreign dry mechanical crusher, according to the need to use large air volume into the cavity or water jacket cooling, in order to reduce the crushing heat, to prevent the shortcomings of material particles sticking to the wall, sticking to the crushing plate;
3.Crushing and grading machine, can reach the fineness requirements of the material in time to send out, avoid over-crushing, narrow distribution of material particle size, fineness 200-6000 mesh, online adjustable.
Dry Desulfurization Equipment,Baking Soda Grinder,Sodium Bicarbonate Grinding Machine,Baking Soda Crusher Shandong Jing Xin Powder Equipment Technology Co., Ltd. , https://www.jxpowder.com
Introduction: Test material heat, cold, dry resistance, humidity resistance.Suitable for electronics, electrical  appliances,communications, instrumentation, vehicles, plastic products, metal, food, chemical,  building materials, medical, aerospace and other products.
Specification:
Model
XB-OTS-80
XB-OTS-150
XB-OTS-225
XB-OTS-408
XB-OTS-800
XB-OTS-1000
Inner size
W*H*DCM40*50*40
50*60*50
50*75*60
60*85*80
100*100*800
100*100*100
External size W*H*DCM
90*143*100
100*153*110
110*168*110
130*178*120
150*193*140
150*193*160
Temperature range
-70°C~+150°C(180°C)
(A:-20°C B:-40°C C:-60°C D:-70°C )
Humidity range
20%~98%R.H.(10%-98%R.H/5%~98%R.H)
Temp humidity
analytic accuracy
/ uniformity±0.1°C;±0.1%R.H./ ±1.0°C;±3.0%R.H.is special optional condition.
Temperature  humidity
control accuracy/fluctuation±1.0°C;±2.0%R.H./ ±0.5°C;±2.0%R.H.
Heat/cooling time
About 5.0°C/min;about 1.2°C/min (5~10°C/min is a special optional condition
Inner and outer materials
SUS#304 Stainless steel for inner chamber and Carton Advanced cold plate nano paint for outer.
Insulation materials
Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials
Cooling system
Air cooling/single segment compressor(-20°C) ,air and water double segment compressor
(-40°C~-70°C)
Protection devices
Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch,
super humidity over-temperature protection switch, fuse, failure warning system
Parts
Watching window,50mm testing hole,PL internal bulbs,partition plate,dry and wet ball gauze
Controller
TEMI" South Korea"TEMI" "OYO" Japan's "OYO" Brand  optional
Compressor
Original France"Tecumseh"brand
Power
1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz
Advantage
Ø 24 hours online
Ø 35 years experiences
Ø Sample chamber of each model
Ø Best price, fast delivery
Ø OEM,ODM
Ø Oversea offices
Ø Own import and export business license
Ø  ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
Customer Support Services
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Features:
*.High-texture appearance, the body adopted an arc shape, surface matte stripes processing, and flat-handle, easy to operate, safe and reliable.
*.Rectangular multi-layer glass View window, the use of guinea pigs observed in the test window witt  anti-sweat heaters device prevents water gas condensate ,Knot, water droplets, PL fluorescent lamps to keep the inside lighting.
*.Door bunk isolated airtight packing, can be effectively isolated from the internal temperature of the leak
*.With external water supply system, convenient to supplement the cylinder water supply, and automatic recovery using.
*.Compressor cycling system used France"Tecumseh"brand which can effectively remove condenser pipe and between  capillary Lubricating oil and whole series adopt environmental protection refrigerant (R23, R404, R507)
*.Controller uses the imported LED display screen, can display measured values and setting time
*.Controller with multisegment program editor and temperature and humidity can be fast (OUICK) or slope (SLOP) controlled.
*.Built-in mobile wheels allow easy movement and placed and has a strong positioning screw position.
Standard:GB/Bb T2423.2-89 high temperature test method   GB2423.1-89 test A: low temperature testmethod 6
Ab IEC60068-2-1 low temperature test method    GJB150.4-1986 test at low temperature
EIA - 364-59 test at low temperature        IEC60068-2-38 temperature cycle
IEC60068-2-78 constant   temperature        IEC60068-2-30   temperature cycle
EIA - 364-31C temp resistance           GB/T2423.3 constant  heat test method
Certificate:
Global safety design, use our chambers safely and with peace of mind for many years to come.
We deliver chambers that conform to international safety standards.
Our chambers conform to ISO risk assessment as well as global safety design electrical safety standards such as CE marking and EMC directive.
The production process of the test chambers :
Our Services:
We are here to help you. Services available:
  Replacement manuals
  Consumables and replacement parts
  On-site maintenance and repair
  Warranty support
  Over-the-phone service support and advice
 If you have an OTS chamber, we will do our best to help you in whatever way we can. Â
 Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.
Service repair:  We prefer you contact us direct at the factory with any problems you may be experiencing. We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs. Rarely can a local contractor get all that done for you as quickly as we can. We also guarantee the work .
Our Company
OTSÂ (Overall Testing System)
   Was established in 1978, with 35 years' history
    With 30,000 square meter salable production base and 120 employees
   Is one of the leading companies solely dedicated to manufacture of
     Environmental Simulation Test Chambers ,Physical Testing Equipment.   Â
   (such as constant temperature and humidity chambers, environmental chambers, climatic test chambers, rain and dust test chambers,thermal shock test chambers,fast change rate chambers, salt spray chamber,UV test chambers,walk in test chambers and other special customized test chambers ; tensile testing machine, vibration test machine ,carton compression testing machines, bursting strength testing machine etc.) ..
   OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement. with offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms: ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...
FAQ:
Q1 : Â Can you customize the product?
   A: Yes, we can customize any products according to requirements.Hot selling lab electronic          temperature humidity cabinet/Environmental climate test chamber also can be customized.
Q2 : How to choose the most suitable products?
   A: Our professional team will give you the best suggestion,just be  patiently to tell us the information     about the parameters your required.
Q3 : Â Can you arrange installations and commissioning in our lab?
  A: Firstly, for standard chamber we had 3-5 days commissioning before shipping. you just need link     power in your lab, then can start to operate
   Secondly; we had detailed operation manual with chamber , any problems you can find and solve     in it. Thirdly, some of customized chambers we should to install and teach your team to operate .
Â
If you want to know more information...
Please leave a message below and click "Â SENDÂ "
Thanks for your time and attention~Thank you!
Â