Model NO.: FL-41, FL-43
Power: Electric
Start Up: Electric Pump
Type: Self Priming Pump
Application: Chemical Pump, Agriculture/RV/Marine/Yachts/Boat/Caravan/Water
Industry: Diaphragm Pump
Media: Liquid
Performance: Self Priming Pump
Theory: Self Priming Pump
Flow Rate: 17lpm/4.5gpm
Pressure: 40psi/2.8bar
Diaphragm: Santoprene
Protection: Thermal/Ignition Protection
Valve: Viton or EPDM
Duty Cycle: Intermittent
Port Dimension: 1/2" NPT
Trademark: LifeSRC
Transport Package: Carton
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
Model NO.: FL-41, FL-43
Power: Electric
Start Up: Electric Pump
Type: Self Priming Pump
Application: Chemical Pump, Agriculture/RV/Marine/Yachts/Boat/Caravan/Water
Industry: Diaphragm Pump
Media: Liquid
Performance: Self Priming Pump
Theory: Self Priming Pump
Flow Rate: 17lpm/4.5gpm
Pressure: 40psi/2.8bar
Diaphragm: Santoprene
Protection: Thermal/Ignition Protection
Valve: Viton or EPDM
Duty Cycle: Intermittent
Port Dimension: 1/2" NPT
Trademark: LifeSRC
Transport Package: Carton
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
Product Description
 Jabsco Pump
17LPM/4.5GPM 40PSI
Colors: Black or required
Application
1. Agriculture/Yacht / RV/Caravan pressurized water system
2. Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
3. Food beverage filling & liquid transfer
4. Any other pressurization system
How a Diaphragm Pump Works
The pump is driven by an AC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragmbehind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosityÂ
| Motor Voltage |
115V/230V |
| Type |
4 Chamber Diaphragm Pump,self Priming, Capable of being run dry |
| Mode |
Demand |
| Certifications Option |
CE Approved |
| Liquid Temperature |
140°F (60°C) Max. |
| Priming Capabilities |
6 Feet(1.8m) |
| Max Pressure |
40psi(2.8bar) |
| Max Flow Rate |
17lpm(4.5gpm) |
| Thermal Overload Protected |
Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports |
10/13mm pyramid hose barb, 13mm angle hose barb |
| 1/2NPT thread filter for your choice. |
| Motor Options |
2 pin connector |
| On/off switch |
| Duty Cycle |
Intermittent(under different pressure the continuous working time will also be different |
Â
Product Description
 Jabsco Pump
17LPM/4.5GPM 40PSI
Colors: Black or required
Application
1. Agriculture/Yacht / RV/Caravan pressurized water system
2. Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
3. Food beverage filling & liquid transfer
4. Any other pressurization system
How a Diaphragm Pump Works
The pump is driven by an AC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragmbehind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosityÂ
| Motor Voltage |
115V/230V |
| Type |
4 Chamber Diaphragm Pump,self Priming, Capable of being run dry |
| Mode |
Demand |
| Certifications Option |
CE Approved |
| Liquid Temperature |
140°F (60°C) Max. |
| Priming Capabilities |
6 Feet(1.8m) |
| Max Pressure |
40psi(2.8bar) |
| Max Flow Rate |
17lpm(4.5gpm) |
| Thermal Overload Protected |
Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports |
10/13mm pyramid hose barb, 13mm angle hose barb |
| 1/2NPT thread filter for your choice. |
| Motor Options |
2 pin connector |
| On/off switch |
| Duty Cycle |
Intermittent(under different pressure the continuous working time will also be different |
Â
CNC lathe is one of the most widely used CNC machine tools.
CNC lathe is mainly used for processing shaft, disc and other parts of the rotary.
Through the operation of numerical control machining program, it can automatically finish the cutting processing of inner and outer cylindrical surface, conical surface, forming surface, thread and end face, and can carry out the work of turning groove, drilling, reaming, reaming and so on.
The turning center can complete more processing procedures in a single clamping, improving the processing accuracy and production efficiency, especially suitable for the processing of complicated rotary parts.
Some common machine tools can not or inconvenient processing parts, processing quality stability, reduce the labor intensity of workers.
Cnc Turning
Cnc Turning,Cnc Turning Parts,Cnc Turning Machine,Steel Cnc Turning
Chongqing Jin Te Rui Machine Co.,Ltd , https://www.die-casting-machine.com