Lightning rod protection scope
Window materialdozens of varieties, more
than 1,000 kinds of specifications, Changchun Taiyuan Fluorine Gold Mica Co.,
Ltd. produces Window material
manufacturers
real materials, welcome site visits. Window materialin the end Well there, samples are provided free of
charge. Changchun Taiyuan Mica Film Production Base is looking forward to your
visit. Can Window material save money?
Window Material,Vacuum Sealed Window Material,Far-Infrared Device Observation Window Changchun City Taiyuan FluorphlogopiteCo. Ltd. , https://www.micaslice.com
The cross-sectional area of ​​the ground deflector should not only be calculated based on the heating conditions when the lightning current passes through, so that it will not melt due to overheating, but also have sufficient mechanical strength. The grounding body is the bottommost part of the entire lightning rod. Its role is not only to safely introduce lightning currents into the earth, but also to further spread the lightning current evenly as it flows into the earth.
The working principle of the lightning rod is, in its essence, the lightning rod is not a lightning rod, but it uses its towering air superiority to lead the lightning to itself and withstand lightning strikes. At the same time, lightning currents are leaked into the earth to protect the buildings or equipment that are nearer to it from lightning strikes. Lightning rods have a range of protection from nearby buildings or equipment that are short of lightning. This range is like a conical tent centered on a lightning rod. Objects that cover the space inside the tent can be free from lightning strikes. This is the scope of lightning rod protection.
The scope of protection of a single lightning rod is shown in Fig. 1. Its specific calculation usually adopts the following method (this method is obtained from a simulation test using a laboratory impulse voltage generator). The protection radius of the lightning rod on the ground is r=1.5h. Where r is the radius of protection (m) and h is the height of the lightning rod (m). The protection radius at the height hx of the object to be protected is rx=(h-hx)p=hap;rx=(1.5h-2hx)p. Where rx—the protection radius (m) of the lightning rod on the hx level; hx—the height of the object to be protected (in meters); ha—the effective height of the lightning rod (in meters); p — the height coefficient (when the lightning rod is too high, The coefficient of protection radius is not increased proportionally). When h≤30 meters, p=1. The top angle α in Fig. 1 is called the protection angle of the lightning rod. For the plain area, α is taken as 45°; for the mountain area, the protection angle is reduced and α is taken as 37°. We use a specific example to calculate the protection range of a single lightning rod. A chimney height hx = 29m, lightning rod tip higher than the chimney 1m. Then the lightning rod height = 30m, the protection radius of the lightning rod on the ground r = 1.5h = 1.5 × 30 = 45 (m), the protection radius of lightning protection for the chimney top level rx = (h-hx) p = (30-29) × 1=1(m).
As the scope of protection increases. The height of single lightning rods should be increased, but if the scope of protection is narrow (such as rectangular), it is not appropriate to use single lightning rods that are too high. In this case, two shorter lightning rods can be used. The scope of protection of two contour lightning rods is shown in Figure 2. The outside protection range of each lightning rod is the same as that of a single lightning rod; the middle protection range of the two lightning rods is defined by a circular arc passing through the apex of the two lightning rods and a lowest point O of the upper edge of the protection range. The height of the lowest point O from the ground is h0 in the formula—the height of the lowest point of the upper edge of the protection range between the two lightning rods (m); h—the height of the lightning rod (m); D—the distance between the two lightning rods ( m); p - high-impact coefficient. The height between the two lightning rods is the minimum width of one side of the protection range on the hx horizontal surface bx=1.5 (h0-hx). When the distance between the two lightning rods D=7hp, h0=0, which means that the two lightning rods no longer form a joint protection range at this time. When single or double lightning rods are not enough to protect all equipment or buildings, three or more branches can be installed to form a larger range of joint protection, and the scope of protection will not be described here. It should be noted that during the lightning period, near the lightning rod grounding device, due to the high stepping voltage, there is a risk of electric shock when a person approaches, and it is generally more dangerous in the range of about 10 meters in the vicinity of the lightning rod grounding device.
Zhengzhou Wanjia Lightning Protection Co., Ltd. is the most professional lightning protection product provider in Henan Province. It has its own "Wanjia" and "WOKA" brand lightning protection product manufacturing enterprise. The products include: Power surge protector (SPD arrester), signal Series lightning protection devices, lightning protection grounding materials, and various lightning rods; and undertake large-scale lightning protection projects, sales of various brands of lightning protection products, and provide lightning protection technical advice and training.
The company has strong technical force, has excellent engineering and technical personnel and construction workers, professional to provide customers with complete lightning protection program design, guidance on the application of lightning protection products and on-site construction during the technical guidance.
The company's products have been exported to the United States, Australia, Uruguay and other places; in the domestic market, especially in the safe city, *, large-scale computer room and other advantages; lightning protection construction nearly a thousand cases, business involves electricity, security, railways, high-speed, airports, finance, Telecommunications, securities, petroleum, base stations, construction, coal mines,*, intelligent communities and other industries have accumulated rich experience in appeals.
In addition, according to the different needs of customers, the company sells world-renowned manufacturers of products, including Germany DEHN, OBO, Phoenix and other companies a full range of lightning protection products, the French Dur Mason ESE2500, Franklin series discharge lightning rods in advance.
As an industry leader, we will try our best to provide our customers with the best products, solutions and services. Customer satisfaction and customer's own competitiveness are the guiding principles of our work. Our marketing and service network has spread all over the country, providing tens of thousands of users with fast, high quality service.