Place of Origin: France

Manufacturer: RECYL

Suitable Range: Ceramic anilox roller, can clean online or offline. Can clean any type of inks(water, UV, solvent for flexo and gravure) and any coating products(UV and acrylic varnishes for offset). It is also biodegradable.

Packing: Plastic, 950 g/bottle, 5~6m2 of ceramic anilox surface to clean. 

One Set Include:Equipped with roller cleaner, rubber gloves,glasses, Non-woven Wiping Cloth, neutralizing powder.

 

Instruction of use:

Please tightly capped the bottle caps after using.

 

1. Offline Cleaning (Recommend)

Clean the surface of anilox, prepare a barrel of water. Wear the gloves and glasses. Put the COBRA detergent on the surface, Homogeneous tile at anilox roll surface, clean time from 20min. To 2 hours(steel brush recommended). Then use sponge which was dip in the water, to clean the spare COBRA on the surface. Then use water wash out the anilox with high pressure. Finally, use the neutralizing powder to neutralize waste water in the bottle and pour into drainage system.

 

2. Online cleaning

Take away or protect the scraping roller, protect well of the spare parts under the anilox, then clean the anilox according to the steps of "offline cleaning".

 

Please read carefully about the products MSDS before using.

 

Attention:

 

1.This product will stimulate the skin and eyes, and will cause to third-degree burn.

2. If touch with skin and eyes carelessly, rinse with water immediately and consult the doctor.

3. Please make sure to wear the gloves and glasses when operating.

4. If accidentally drinking, please call the doctor to have emergency treatment. 

5. Please avoid to touching the aluminium products surface for a long time.

 

 

Contact us:
 

Place of Origin: France

Manufacturer: RECYL

Suitable Range: Ceramic anilox roller, can clean online or offline. Can clean any type of inks(water, UV, solvent for flexo and gravure) and any coating products(UV and acrylic varnishes for offset). It is also biodegradable.

Packing: Plastic, 950 g/bottle, 5~6m2 of ceramic anilox surface to clean. 

One Set Include:Equipped with roller cleaner, rubber gloves,glasses, Non-woven Wiping Cloth, neutralizing powder.

 

Instruction of use:

Please tightly capped the bottle caps after using.

 

1. Offline Cleaning (Recommend)

Clean the surface of anilox, prepare a barrel of water. Wear the gloves and glasses. Put the COBRA detergent on the surface, Homogeneous tile at anilox roll surface, clean time from 20min. To 2 hours(steel brush recommended). Then use sponge which was dip in the water, to clean the spare COBRA on the surface. Then use water wash out the anilox with high pressure. Finally, use the neutralizing powder to neutralize waste water in the bottle and pour into drainage system.

 

2. Online cleaning

Take away or protect the scraping roller, protect well of the spare parts under the anilox, then clean the anilox according to the steps of "offline cleaning".

 

Please read carefully about the products MSDS before using.

 

Attention:

 

1.This product will stimulate the skin and eyes, and will cause to third-degree burn.

2. If touch with skin and eyes carelessly, rinse with water immediately and consult the doctor.

3. Please make sure to wear the gloves and glasses when operating.

4. If accidentally drinking, please call the doctor to have emergency treatment. 

5. Please avoid to touching the aluminium products surface for a long time.

 

 

Contact us:
 

A hydraulic motor is a mechanical actuator that converts hydraulic pressure and flow into torque and angular displacement (rotation). The hydraulic motor is the rotary counterpart of the hydraulic cylinder as a linear actuator. Most broadly, the category of devices called hydraulic motors has sometimes included those that run on hydropower (namely, water engines and water motors) but in today's terminology the name usually refers more specifically to motors that use hydraulic fluid as part of closed hydraulic circuits in modern hydraulic machinery.

Conceptually, a hydraulic motor should be interchangeable with a hydraulic pump because it performs the opposite function - similar to the way a DC electric motor is theoretically interchangeable with a DC electrical generator. However, many hydraulic pumps cannot be used as hydraulic motors because they cannot be backdriven. Also, a hydraulic motor is usually designed for working pressure at both sides of the motor, whereas most hydraulic pumps rely on low pressure provided from the reservoir at the input side and would leak fluid when abused as a motor.^[1]

Gear Motors

Gear Drive Motor,Gear Motor,Gear Motors For Driver,Fan Gear Motors

GRH , https://www.grhcn.net