Maoming Petrochemical kept a close eye on the market and adjusted its product structure in a timely manner in accordance with changes in market prices and demand. They learned that the spread of lubricant base oils of different grades has further widened. In this regard, Maoming Petrochemical optimizes base oil production and increases the proportion of high-grade base oils.

Since 2012, Maoming Petrochemical has diversified its pricing for lubricant base oil at the headquarters, and the difference between the base oil price of Ia, Ib, and Ic grades was RMB 500/ton, carefully implemented a differentiation strategy, and optimized the choice of base oil raw materials to separate and store the materials. , Optimizing operations throughout the entire process, continuing to optimize base oil blending recipes and other measures, and comprehensively increasing production of high-quality base oils, with significant results. From January to October 2012, Maoming Petrochemical produced a total of 228,000 tons of base oil, of which the proportion of base oil above grade Ib was as high as 87.4%, which was the highest level in history, an increase of 9.4 percentage points from the planned 78%, and the increase in production grade Ib, Ic Base oil is 20,000 tons. This alone will increase efficiency by nearly 10 million yuan.

According to Chen Xinzhe, director of the Lubricating Oil Division III workshop, according to national standards, the basic quality oil produced by the refinery is divided into three grades: Ia, Ib, and Ic. The Ic grade is the highest and the market price is the highest. At the beginning of the year, the refining division set up a research team to increase production of Ic base oil. Through careful and detailed analysis and calculation, it has formulated measures to improve the quality of base oil and increase the proportion of base oil Ic. The oil refining division separates No. 2 atmospheric decompression and No. 4 atmospheric and vacuum minus four lines into the tank independently, optimizes the No. 2 atmospheric and vacuum device minus two steam stripping operations, and selectively organizes the secondary and tertiary lines for Class Ic base oils. Production. Through a series of optimization measures, the production and proportion of Ic-grade base oils have been greatly increased, and the benefits have been increased.

At the same time, Maoming Petrochemical is eyeing the market and actively exploring overseas markets. In October 2012, for the first time, lubricating oil base oil products were processed and exported to 480 tons, with a profit of 450,000 yuan. Maoming Petrochemical Co., Ltd. optimized profit evaluation. In the current domestic market, weak lubricant products and poor efficiency, the processing and export of raw materials has become a breakthrough point. According to different crude oil raw materials and production process conditions, the company's internal planning, production and other departments communicate And coordinate, optimize the production process, broaden the way to produce base oil raw materials; at the same time, strengthen coordination and communication with Lubricant Maoming Branch, increase the processing of imported materials, actively expand the overseas market orders, enhance the competitiveness of overseas markets, and become refined A new highlight of management work.

Thermal Spray Materials

Metals, alloys and composite powders commonly used in thermal spray hardfacing technology and coating service. These unique powders are instantly heated by thermal spraying (welding) methods such as high temperature flame or explosive flame, and are sprayed and deposited on the cold or hot workpiece surface with high-speed heat flow in a molten or semi-melted state to form a surface Reinforcing layer, in order to improve the wear resistance, corrosion resistance, heat resistance, oxidation resistance or repair of external dimensions of the workpiece surface. XTC produces WC, CrC, Oxide Ceramic, Boride Powder, Metal Alloy Powder, Pure Metal and Spray Wire, etc. product. For HVOF/HVAF/plasma/Flame spray coating and applications. Meet the wear and corrosion resistance requirements of different surfaces.

WC, CrC oxide ceramic powder and boride products are excellent in wear resistance and high temperature corrosion resistance. Taking WC products as an example, the hardness can reach HV1300-1500, and the temperature of CrC products can reach 800 degrees Celsius.

Metal alloy powder, Pure Metal and Spray Wire products have more applications in glass mold, steel and machinery industries. And XTC products are now become more and more popular in Metal spray coating and thermal spray coating industry.

Coating Service,Metal Spray Coating,Flame Spray Coating,Thermal Spray Coating

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtccarbide.com