According to the mine production practice certification and the research results of mercury protection, the following measures are summarized for reference:
1. Develop strict safety technical operating procedures.
2. Strengthen personal protection ability, wear mercury-proof masks, work clothes and protective gloves during operation. Wash your face, wash your hands and rinse your mouth with hot water after work. Work clothes should be washed frequently and checked regularly.
3.1) The mercury amalgamation board shall be located in the sealed enclosure and shall be subjected to strict closed negative pressure ventilation to prevent air pollution.
2) Work such as scraping gold , mercury immersion, and mercury squeezing should be carried out under the cover of water to prevent mercury evaporation.
3) Set up a special amalgamation workshop, the indoor walls should be treated according to the requirements of imitation of mercury, such as painting and painting. To have good ventilation measures, a fume hood is installed indoors, and mercury and gold squirting operations are carried out in a fume hood to reduce the diffusion, loss and pollution of the plant. The floor is made of polyvinyl chloride or phenolic plastic, asbestos hard rubber, synthetic rubber linoleum diabase and granite plates and other materials that do not absorb mercury to keep the ground smooth and have a slope of 1 to 3%.
4) Careful operation to prevent mercury from spilling onto the ground. In case of spilled mercury, it should be collected in time with a pipette or other utensils. To contaminated ground impregnated with a saturated solution of ferric chloride or nitric acid solution, after a day of washing water.
4. Pay attention to the following when distilling mercury paste:
1) The mercury paste in the distillation irrigation should not be too thick, generally controlled at 40 to 50 mm, to avoid the disadvantage that the mercury is difficult to be completely eliminated due to the prolonged heating time.
2) In order to prevent the perforation of the bottom of the tank caused by heavy minerals and a large amount of sulfur in the mercury paste, the mercury paste must be pure to avoid loss of gold and mercury pollution.
3) The mercury distillation operation should be slowly warmed up. If the furnace temperature rises sharply at the beginning, it is easy to cause the mercury to splash due to intense boiling.
4) In order to prevent the explosion of the distillation tank, the end of the iron pipe drawn from the distillation tank should not be in contact with the cooling water surface where the condensed mercury is collected.
5) Maintain good ventilation in the room. 5. Set up a monitoring system, often check and measure indoor air to meet national health standards.
6. The operation of internal amalgamation can change the externally mixed mercury to the internal amalgamation process as much as possible to reduce mercury loss and pollution.
7. Improve the process flow and realize the mechanization of the amalgamation operation. It is best to cancel the amalgamation operation.

Copper And Pickling Corrosion Inhibitors

Copper And Pickling Corrosion Inhibitors,Pickling Corrosion Inhibitors,Copper Corrosion Inhibitors,Azole Copper Corrosion Inhibitor

Jiangyin Lanyu Chemical Co.,Ltd. , https://www.nblanyu-chem.com