Motorcycles should also pay attention to cooling and heat protection
1. Check the brake system    The high temperature easily causes the brake fluid to evaporate to generate gas, forming a gas barrier, and the brake friction plate is also easy to ablate, causing the brake to malfunction. The brake system should be checked and adjusted in time, the brake fluid should be added or replaced, and the air resistance in the pipeline should be eliminated. Guaranteed reliable braking performance. 2, check the tire pressure    Also pay attention to tire pressure during summer driving. Proper tire air pressure gives the motorcycle maximum traction, stability, driving comfort and long life. Insufficient tire pressure not only increases driving resistance, increases engine load and fuel consumption, but also causes the tire to fall off the rim; excessive tire pressure can reduce the stability of the motorcycle. Therefore, before leaving the car, you should carefully check the tire pressure of the motorcycle. 3. Change the oil in time    In summer, the ambient temperature is high, the viscosity of the oil is reduced, and the oil is correspondingly thinned. The oil that uses the required viscosity will deteriorate the lubrication condition of the friction surfaces of the engine and aggravate the wear of the machine. In addition, the service life of the oil at high temperatures will also be shortened. Therefore, when entering the summer maintenance, it is best to change the oil in time. 4, clean the filter to adjust the gas    Appropriately increase the number of cleaning of the air filter to reduce the air intake resistance; clean the carburetor in time to reduce the oil level of the float chamber; properly adjust the gas distribution screw to reduce the oil supply and ensure the correct air-fuel ratio. Through the above measures, reduce fuel consumption and prevent the engine from overheating. 5, avoid overload    Overweight and excessive load will cause the engine to be overloaded, and it will always be in a bad working condition with large throttle and low speed. This will reduce the normal cooling effect, make the engine overheat, deteriorate the lubrication conditions, and increase the wear, which will lead to a gradual decline in engine performance, which will eventually shorten the service life of the motorcycle. 6, avoid driving for a long time    After a long distance driving, stop and rest, let the engine cool down, do not pour cold water on the engine to prevent bursting; keep the engine clean and ensure good heat dissipation.
Solid-liquid Separation Belt Filter Press
The belt filter (belt press filter, or belt filter press) is an industrial machine, designed and manufactured by our factory. It has S-shaped filter belt, so the pressure of sludge is gradually increased and eased. It is suitable for the dewatering of organic hydrophilic materials and inorganic hydrophobic materials , particularly the dewatering of sludges in the chemical industry, mining and water treatment. The process of filtration is primarily obtained by passing a pair of filtering cloths and belts through a system of rollers. The system takes a sludge or slurry as a feed, and separates it into a filtrate and a solid cake.Due to lengthening the settling zone, this series of press filter has rich experience in filter pressing and dewatering of different types of materials.
1.Automated operation,Stable structure, no labor required;
Sludge dewatering for wastewater treatment, Foodstuff, Chemicals,Slaughter, Animal husbandry,Pharmaceutical, Electroplating, Papermaking, Leather, Printing and dyeing, Mining, Medicine, etc
Belt Press Equipment,Solid-liquid Separation Belt Filter Press,Belt Screw Press,Belt Type Screw Press,Belt Filter Press YIXING HOLLY TECHNOLOGY CO.,LTD. , https://www.watertreatmentmachine.com
Advantages:
2.Automatic control, continuous operation,High cycle life;
3.Easy management, easy maintenance,low cost.
Applications: