Nissei resin industry adds 3 medium-sized machines in the composite molding machine series

September 19 15:18:04, 2023

Nissei resin industry has added a medium-sized machine to the "FNX" series of electric and hydraulic composite injection molding machines, and will accept orders in February 2007. Six models of the three models to be launched are "FNX220-50A" and "FNX220-71A" with clamping force of 2110kN, "FNX280-71A" and "FNX280-100A" with clamping force of 2740kN, and "FNX360-100A" and "FNX360-140A" with a clamping force of 3540 kN. With the addition of new models, the product lineup of horizontal composite molding machines will increase to 9 types with a clamping force of 405k to 3540kN.

The FNX series is equipped with a hybrid drive source for the molding machine – the servo motor and the hydraulic system – which can drive the motor only when needed, thus reducing energy consumption. For example, a model with a clamping force of 3540 kN reduces the power consumption by about 55% compared to the original hydraulic press. In addition, since the temperature of the lubricating oil is hard to rise, the amount of cooling water used can also be reduced.

The clamping structure is the same as the hydraulic “FN” series, which also uses direct compression clamping. The low clamping force can be easily set so there is no need to worry about excessive clamping force being applied. This will increase the life of the molding machine and mold, as well as prevent gas leaks and short shots.

Double Sided Adhesive Tape

Double Sided Adhesive Tape,Black Color Butyl Tape For Waterproofing,Butyl Sealing Strips,Two Face Adhesive Sealing Tape

SICHUAN FOREVER RADIATION TECHNOLOGY CO.,LTD , https://www.fieldjointscoatings.com