Plastic Actuator Normal Closed Angle Seat Valves
We have got CE certificate from 2015. We make can manufacture various types of high mast with lifting system for stadium highway parking lot and etc.
Our firm introduced whole set of good-sized numerical control hydraulic
folding equipment(1280/16000) as well as equipped with a series of
good-sized professional equipments of armor plate-flatted machine,
lengthways cut machine, numerical control cut machine, auto-closed up
machine, auto-arc-weld machine, hydraulic redressing straight machine,
etc. The firm produces all sorts of conical, pyramidal, cylindrical
steel poles with production range of dia 50mm-2250mm, thickness
1mm-25mm, once taking shape 16000mm long, and large-scale steel
components. The firm also is equipped with a multicolor-spayed
pipelining. At the meantime, for better service to the clients, our firm
founded a branch com. The Yixing Jinlei Lighting Installation Com,
which offers clients a succession of service from design to manufacture
and fixing.
Steel Lighting Pole High Mast,30m High Mast Pole, High Mast pole for stadium Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteelpole.com
Compact in size and lightweight.
Long service life, economical investment.
Large flux, small flux resistance, no water hammer.
Stem automatic correction, self-lubrication, maintenance free.
Control type
Normal closed,normal open,double acting
Cylinder material
stainless steel, polyamide PA
Pneumatic accessories
Limit switch, locator, solenoid valve, filter relief-pressure valve, manual operating device
Medium temperature
PTFE:-30~180ºC   F46:-30~+220ºC
Environment temperature
-30~80ºC
Nominal pressure
1.0~1.6MPa
Nominal diameter
DN10-50-80mm
Connection type
Thread,Flanged, Clamp, Welded
Body construction
One-piece, Y-type
Body material
304,316, 316L
Spool pressure
304,316, 316L
Seal material
PTFE,F46
Applicable medium
Steam, water, air, oil etc.
1. Based on concrete conditions select the valve installations direction
2. Installation charge of road should be cleaned to ensure no impurites or medium welding slag, so as not to damage the valves, causing leakage.
3. Install welded vavle, be sure to detach the valve actuator
4. Select the appropriate adjustment range of the regulator
5. Ensure that the air pressure range sufficient capacity
6. Check to ensure seal integrity of the connection
7. Valve repair or replacement, the demolition of the body and the connecton in the room temperature, the valve under the state open to avoid damage to the thread
8. Installation and connection in the body the threads coated with a small amount of thread grease, and tighten also supply the full stainless steel angle seat valves, more information, welcome to contact with me, or visit our website:www.vpc-pneumatic.com, thank youÂ