BM-9A-1 Semiautomatic bottle blow molding machine can produce PET containers including the bottles for kinds of wine, drink ,soybean, vinegar, and pesticide (less than 5liters) according to the different bottle shape and diameter.


Equipment list:

ITEMS		NAME	MODEL	QUANTITY	NOTE
1		Blow Molding Machine (One Cylinder)	BM-9A	1set	Including 1-main machine and 1- Infrared oven
2		HP Air Compressor	1.2m3/mim30Kg	1set	/
3	Air dryer		2.0m3/min30kg	1 set	Including Two  Air filters
4	Water chiller		3HP	1set	/
5	 Mold		5L	1set	   One cavity
6	High-pressure oil pipe		Â	15m	/
7	Spare parts		One year	1set	/

 

*Spare parts ist :
Seal cushion(10pcs);Lamps(5pcs);Fuse(3pcs);Switch(1pcs);breaker(1pcs);Silicon controlled (1pcs)
pressure adjust (1pc)
 
Features:
· Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
· The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
· The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
· The machine can be operated in the step-by-step mode and the semi-auto mode.
· The machine is small with low investment, easy and safe to operate.

Technical Parameter of blow molding machine:

Main machine	Model Type	Parameter
Product Spec	Max. product volume(L/cav)	5L
	Max. preform neck size(mm)	150
	Max. product diameter(mm)	200
	Max. product height(mm)	400
	Cavities	1
Blow machine	Die force (KN)	120
	Die stroke (mm)	320
	Max. mould size(mm)	390*350
	Mould thickness	Adjustable
	Mould spacing(mm)	Adjustable
	Max. pulling stroke(mm)	500
	Operation pressure(Mpa)	0.8-1.0
	Operation air consumption (1tr/min)	350
	Blow pressure(Mpa)	1.2-2.8
	Blow air consumption (1tr/min)	300
	Output(pcs/h)	350
	Machine size(LxWxH)(m)	1.56*0.7*1.9m
	Machine weight(KG)	700
Oven	Temperature grade(rate)	8
	Heating time(S)	90-200
	Voltage(V)	220 or as your request
	Frequency(HZ)	50/60
	Total power(KW)	16
	Oven Size (L*W*H)	1.45*0.65*1.15m
	Oven weight (KG)	330

 

HP air compressor:

Air compressor	Unit	1.6M3/30KG
Volume	M3	1.6
Pressure	Kg	30
Speed	r/min	560
Power	KW	18.5
Overall Dimension	mm	1600*900*1000
Weight	kg	580

 

Air Filter:

Refining-Filter	Unit	2.0M3/30Kg
Flow Capacity	M3/Min	2
Max. work pressure	Mpa	3.0
Inlet Temp.	ºC	≤50
Overall Dimension	mm	750*350*350
Weight	kg	20

Air dryer:

 

Refrigeration Air Dryer	Unit	2.0M3/min 3.0Mpa
Flow capacity	Nm3/min	2.0
W.P	Mpa	3.0
Inlet Temp.	ºC	≤80
Dew point	ºC	23
Ambient Temp.	ºC	≤38
Power supply	V/HZ	220/50
Compressor power	Kw	0.75
Cold Medium	mm	1050×650×1100
Weight	Kg	120

water chiller:

Model		03WCI
4.4/38ºC Cooling capacity(Kcal/h)		7188
Compressor		All-closed vorticity
Compressor power (KW)		2.5
Refrigerant		R22
Chilled water pump power(KW)		0.75
10ºC Max. flow rate of chilled water(L/min)		55
Flow water inlet and outlet pipe		1''
Condensing water rate L/min		≥36
Chilled water inlet and outlet pipe		1''
Exterior dimension	Length(mm)	1000
	Width(mm)	600
	Height(mm)	1180
Water tank capacity	L	50
Weight	Kg	150

Welcome you to choose our fast fitting/Fast Coupling, you could give us your request, we will recommend you the best solution of fast fitting. You will many many port size we made, no matter G thread or Npt thread, all you can request from us. We will do our best to give you best choice.

Normally our fast fitting is made of POM, with good appearance and high quality, and widely used on RO water treatment system, and also can be used on pneumatic or hydraulic industry, we welcome you getting samples from us. If you need other material fast fitting, no problem, you also can tell us, we can develop as your request.

POM Fast Fitting

Pom Fast Fitting,Pipe Adapter,Quick Coupling,Plastic Fast Fitting,Fast Coupling

NINGBO BRANDO HARDWARE CO.,LTD , http://www.brandopneumatic.com