Rubber Ship Airbag for Boat Launching and Salvage
CG fuel tank, side cover, frame body, front
and rear wheel, front and rear tire, front and rear shock, spoke wheel, rim,
seat, carrier, mirror, speedometer, handle switch, head light, rear lights,
turning lights, handle bar, main stander, side stander, rear fork, hub cover,
hub, air filter, battery, axle, cables, wire harness, regulator, flash, start
relay, CDI, horn, fuel lock, chain, muffler, steering stem, chain cover, brake
pedal, front and rear fender, springs, front safe guard, back seat, helmet.
Motorcycle Spare Parts,Cnc Motorcycle Spare Parts,Custom Motorcycle Spare Parts,Aluminum Motorcycle Spare Parts JIANGMEN CHANGHUA GROUP CO., LTD. , https://www.changhuagroup-motor.com
Standard air bag maximum diameter size range is 2.0m.
High-pressure pneumatic balloons are used for ship lifting, loading, and floating. They are widely used in cargo boat launching and landing, lifting and moving sunken ships, and salvaging stranded boats. Air bags have the benefit of not only saving labor and time, but investment costs. Additionally they are flexible and dependable.
The technology of applying pneumatic roller-bags to the launching and landing of ships relieves the restrictions of traditional slide-board technology which is commonly used in building small or medium size ships. Years of trial and error with this technology has increased the ability of launching 100-ton ships to 7, 000-ton ships!
4-layer bags that are 1.5m dia x 15m long contain a rubber content that is not less than 51%. The air-bags can safely hold 156-tons with a safe working pressure of 0.08MPa while rolling. When standing still the highest lifting pressure is 0.10MPa while holding 194-tons.
6-layer bags that are 1.5m dia x 15m long contain a rubber content that is not less than 51%. The air-bags can safely hold 234-tons with a safe working pressure of 0.12MPa while rolling. When standing still the highest lifting pressure is 0.14MPa while holding 272-tons.
We can also manufacture 8-layer or more.