Model NO.: SK52QF111B/212B/222B
Trademark: SANKI
Specification: 1080*490*2193mm
Origin: Beijing Sanki
HS Code: 8413110000
Features:* Customer friendly operation
* Best exterior construction and good appearance* Trustable highly precise metrology equipment
* High performance for electronic parts
* High quality explosion-proof motor with strong ability against power fluctuation
* Specially designed filtering systems with build-in re-cleanable filter
* With rich functions expansion like POS for smart card and bank card
* Flexible fuel application for gasoline, diesel, and kerosene etc.
* Works well in harsh conditions, like extremely cold, hot, humid, and sand-stormy environment
Optional Configuration:Printer,IC card, ID card, communication for FMS, vapor recovery, break away,swivle, emergency stop, LED light,ect.
Technical specifications:
Accuracy for the unit |
±0.25% |
Flow rate |
45Â ~80L/min |
Ambient temperature |
-25ºC~ +55ºC; -40ºC ~ +50ºC |
Relative humidity |
20% - 95% |
Unit noise rate |
< 70dB (A); |
Inlet vacuum rate for  suction pump |
>=54kPa |
Communication |
With RS 485 port, or current loop
|
Power supply |
AC 220V(  -15%~+10%),(50/60±1)Hz ; AC 380V( -15%~+10%); (50/60±1)Hz
|
Digit of sale |
7digits (decimal points can be adjusted ) |
Digit of volume |
6digits (decimal points can be adjusted ) |
Digit of unit price |
5digits (decimal points can be adjusted ) |
Totalizer of sale |
0~42949672.95Â |
Totalizer of volume |
0~42949672.95Â |
Model Range
/200 |
SK52Z/G/QF212B |
1 |
2 |
4 |
2/side |
1080*490*2193 |
265/280/223 |
SK52Z/G/QF222B |
2 |
2 |
4 |
2/side |
1080*490*2193 |
293/308/230 |
Z: Vane  pump  G: Gear pump Q: Submersible pump |
About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.Â
Medium-speed Plastic Granulator
The medium-speed beside-the-press granulators of RG-21 series are used together with plastics molding machine. It is
designed to crushing various shorts, reuse and semi-finished products made of plastic and rubber materials such as soft PC, polycarbonate, nylon, ABS and so on in sheet, twig or mesh shapes.
The machine is characterized with compact structure, attractive appearance, convenient in operation, optimized rotation knife design
to achieve lowest energy consumption and higher cutting efficiency.
The characteristics of the machine:
(1)Integral body, sturdy and durable, keep excellent performance even after long-term crushing
(2)Heavy loading bearing and dust protection device, the noise-proof board can prevent vibration and noise effectively
(3)The overloading protector on the motor and interlock protection device on the power source, double protection for the safety of human being and motor
(4)Paddle-blades rotor adopting shear principle, made of high contented chromium steel, shred various plastics easily
(5)The gap between knives is adjustable. The knives can be dismounted when unsharp, to be used repeatedly, long time using life
(6)Separable design, the bunker, main body, mesh frame are dismounted easily, convenient for bunker cleaning
(7)With wheeled feet, convenient for moving
Introduction:
RG-16 and RG-21 series medium-speed granulators are paddle blades type. They are mainly used for granulating sprues or
rejects fed by pickers or belt conveyors beside the molding machines. They feature low speed, high torque, low noise and dust
level,excellent quality and performance. Machines are built to comply with CE safety standards.
Features
RG-16 and RG-21 series adopt paddle blades and integration design to obtain better cutting performance, and unfixed blades
which can keep a settled cutting clearance without adjustment after resharpen.
Low granulating speed and sharp angle design of rotating blades are helpful for smooth and continuous operation.
Optimal cutting angle makes resistance small and avoid blockage to improve cutting efficiency.
Optimal design can effectively reduce vibration during operation of granulator.
Low speed granulating ensures well-proportioned granules and low dust level.
Low speed and sound-proof material hopper brings a quieter operation environment.
Easy access for easy maintenance and cleaning.
Small in size with castors for easy moving.
High safety grade design to comply with European safety standard.
30-sec instant recycling system, regrind conveying via blower & cyclone, dust separator, height-increasing storage tank and full-receiver alarm device. Straight hoppers, special screens.
Medium-Speed Granulator schematic structure:
Medium-speed Granulator
Rhong Plastic Machinery,Plastic Crusher, Plastic Granulator Machine, Medium-speed Granulator,Plastic Grinding Machine
Ningbo Beilun Rhong Machinery Manufacturing Co., Ltd. , http://www.rhongmachinery.com