Seed X-ray machine how to maintain
The dicing machine is an important equipment in the production process of meat products: the main raw materials such as meat pieces and fat are cut into the diced meat required by the user, and the size of the knife grid can be adjusted to cut the shredded meat and the meat slices. The size of the diced meat is determined by the number of blades in the knife grid. The dicing machine produced by our factory is suitable for large, medium and small meat food processing plants, and can also formulate and produce products with special technological requirements according to the requirements of users.
Machine Introduction:
1. Adjust the cutting thickness knob to change the advancing speed of the meat push rod to meet different cutting thickness requirements.
Frozen Meat Cube Dicer,Chicken Meat Cube Dicer,Meat Strip Machine,Meat Strip Cutting Machine Henan Gems Machinery Co.,Ltd , https://www.gemsmachines.com
The seed X-ray machine can penetrate agricultural and forestry seeds such as corn, rice, citrus stalk, Chinese fir, pine seed, chestnut, and rapeseed. It can see the development of hollows, germ development, size, shape and quantity of the internal pest center, and the inspection of seed pests and diseases. Very helpful, then how do we maintain it? Its maintenance measures include:
1. The grounding of the group and the head, controller, and cabinet shall be in good contact with the outside grounding wire.
2. Moving is to prevent strong vibration and collision, so as not to damage the internal parts of the head.
3. Never turn the power switch while exposing.
4. The billions of lead glass are damp and do not touch with your hands.
5. When the instrument is finished, cut off the power supply and the water source.
6. If the instrument is wetted during storage, it should be dried at less than 50 degrees Celsius or air-dried for more than 4 hours to allow the instrument to dry completely.
2. Adjust the pre-pressure knob to keep the product consistent during the cutting process.
3. Adjust the meat push rod to step motion, when single-edged cutting is used, the extrusion of the product during the cutting process can be minimized.
4. The cutting groove-side adopts an active side pressure mechanism, which is convenient for feeding and improving work efficiency.