Product Type:                 Full coupling, Harf coupling, Reducing coupling, Reducer insert, Union, 90°elbow, 45°elbow,        Tee, Cross, Cap, Cross, Square head plug, Hex head plug, Round head plug, Hex head bushing,        Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.  Size:               1/2" to 4"(DN15~DN100)  Range(Wall Thickness):
       3000LB to 9000LB        XS, Sch80, Sch160, XXS.  Standard:
       ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.  Material:
       Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel,        Nonferrous metal (Nickel Alloy, Aluminum Alloy , Titanium Alloy,...) etc.  + SOCKET WELD FITTINGS
       A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
       To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations. Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods. SW Fittings are family of high pressure fittings are used in various industrial processes.  Types of Threaded Fittings by Class and Size
Description
Class Designation Â
3000
6000
9000
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps
1/2 - 4
1/2 - 2
1/2 - 2
1/2 - 4
1/2 - 2
1/2 - 2
1/2 - 4
1/2 - 2
1/2 - 2
Pipe Size by Wall Thickness
SCH 80 / XS
SCH 160
XXS
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS
+THREADED FITTINGS
       Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
Types of Threaded Fittings by Class and Size
Description
Class Designation
2000
3000
6000
Elbows 45 and 90 degrees Tees, Crosses, Coupling Half-Coupling, Cap
1/2 - 4
1/2 - 2
1/2 - 2
1/2 - 4
1/2 - 2
1/2 - 2
1/2 - 4
1/2 - 2
1/2 - 2
Pipe Wall
SCH 80 / XS
SCH 160
XXS
Plugs and Bushings are not identified. They may be used up through Class 6000    Product Type:                 Full coupling, Harf coupling, Reducing coupling, Reducer insert, Union, 90°elbow, 45°elbow,        Tee, Cross, Cap, Cross, Square head plug, Hex head plug, Round head plug, Hex head bushing,        Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.  Size:               1/2" to 4"(DN15~DN100)  Range(Wall Thickness):
       3000LB to 9000LB        XS, Sch80, Sch160, XXS.  Standard:
       ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.  Material:
       Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel,        Nonferrous metal (Nickel Alloy, Aluminum Alloy , Titanium Alloy,...) etc.  + SOCKET WELD FITTINGS
       A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
       To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations. Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods. SW Fittings are family of high pressure fittings are used in various industrial processes.  Types of Threaded Fittings by Class and Size
Description
Class Designation Â
3000
6000
9000
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps
1/2 - 4
1/2 - 2
1/2 - 2
1/2 - 4
1/2 - 2
1/2 - 2
1/2 - 4
1/2 - 2
1/2 - 2
Pipe Size by Wall Thickness
SCH 80 / XS
SCH 160
XXS
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS
+THREADED FITTINGS
       Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.
Types of Threaded Fittings by Class and Size
Description
Class Designation
2000
3000
6000
Elbows 45 and 90 degrees Tees, Crosses, Coupling Half-Coupling, Cap
1/2 - 4
1/2 - 2
1/2 - 2
1/2 - 4
1/2 - 2
1/2 - 2
1/2 - 4
1/2 - 2
1/2 - 2
Pipe Wall
SCH 80 / XS
SCH 160
XXS
Plugs and Bushings are not identified. They may be used up through Class 6000Â Â
This Plastic Peripheral Machine Series
includes fully automatic edge recycling system, stainless steel mixer, strong
granulations, chiller and so on. These are some optional spare parts for the
stretch film machine, they are simple, easy to operate, it will be perfect
together with the stretch film machine, comes true one-stop production line.
On-Line Edge Recycling System:
To recycl the edge film when the stretch film machine is running , it is easy to operate, save power and material, achiece recycling use.
Stainless Steel Mixer
Helical circular mixture fast and equal
stiming, suitable for all kind of plastic raw material;
Installed with power control device to
ensure safety;
Drying & mixing type is available
(optional).
The strong Granulator
Tailored to meet a wide variety of requirement,
able to granulating & recycle all kind of plastics material with different
texture and shapes.
Chiller
Used for cooling the water inside the
cooling roller, it has wind cooling and water cooling two types. The chiller
can help the water in a constant temperature, keep the cooling surface same temperature,
to make the film more beautiful.
Air Compressor
Air compressor is a compressed gas equipment, which is the main source
device, the compression of air pressure generating, can make the mechanical
energy of original motivation (usually a motor) convert into gas pressure
energy.
Plastic Peripheral Machine Series
PE Film Recycling Machine,Waste Reuse System,Recycling Cutting Equipment,Plastic Peripheral Machine Series
