Stainless Steel Submersible Pump (SJ)
Hard turbine speed door: set energy-saving insulation and efficient wind environmental seal in a new metal industrial doors , opening speed of up to 1.5meters per second , For applications that require frequent rapid opening of the logistics channel , Insulation thickness 0.7mm aluminum door intermediate polyurethane foam , total thickness 40mm door wide 185mm per meter weight 1.63KG, Having good thermal insulation and light weight impact strength and other characteristics , wind rating of greater than 12 and theft , The door is suitable for indoor and outdoor fast-track logistics and production , The door type for enterprises save a lot of energy due to air flow generated loss than ordinary industrial sliding doors shutter doors save energy about eighty percent , Rapid opening and closing of the door so that enterprises in the rotational speed of the production and logistics of the door is greatly improved enterprise logistics and production must pass through the channel selection and its use is directly related to the efficiency of production and logistics , This product has high reliability , practicality and easy operation and quick fix for me , Drive control using a stable energy-effcient and accurate hard to guarantee fast and reliable operation of the door system the door to ensure trouble-free operation every year more than 250,000 times
Turbine Hard High Speed Door, high speed spiral doors, aluminum high speed turbine door, Aluminum Rapid Door, Aluminum Fast Door SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfafrs.com
Solid grain-or-fiber-free dilute clean non-corrosive liquids;
Maximum liquid temperature: 35
Maximunm working pressure: 30 bar
pH: 6.5~8.5
Maxium diving depth: <=50m
Scope of application
This series is applicable to circulation and pressurizing of the clean water and softened water;
This series is made from stainless steel 304 and has good corrosive resistance for conveying cold water containing small amount of oxides. It is also used for conveying slightly alkaline water and de-mineralized water. Pump made from stainless steel 316 and FPM is applicable to conveying highly corrosive liquid.
Curve conditions
The curve tolerance complies with ISO9906 shown in attachment A.
All curves are based on the measured values of 3*380V, 50Hz, 2850r/min.
All measurements are carried out with gas-free water of temperature 20. The curve is applicable to kinematical viscosity 1mm2/s. In case density of the liquid conveyed by the pump is higher than that of water, it is necessary to use corresponding motor of higher output power.
The coarse part of the curve means the recommended performance scope.
The performance curce includes loss caused by check valve etc.
Motor of oil-filling type
4"motor, single phase, maximum power up to 1.5. KW
4"motor, three phase, maximum power up to 7.5. KW
6"motor, three phase, power form 9.2KW to 37 KW