TEIKOKU Hot Water Circulation Non-seal Canned Motor Pump
C/U/ Channel & T Bar Roll Forming Machine. Those machines are
also for making building material.
C/U/ Channel is the machine for making C track U channel for making ceiling, drywall
and others.
T Bar Roll Forming Machine is for making main T gird, cross T gird
which are only for ceiling.
This machine can be sorted two type according to the function. One is for drywall roll forming machine, another is ceiling roll forming machine.
C/U/ Channel & T Bar Roll Forming Machine T Bar Roll Forming Machine, C/U Channel Roll Forming Machine, Light Keel Roll Forming Machine Zhongtuo Roll Forming Machinery Co., ltd , http://www.rollsformingmachines.com
1). Capacity: Q up to 1200m3/h
2). Head: H up to 800m
3). Fluid Temp. Range: -200 to 450°C
4). Material:Â
  Metallic: SS304/316316L; Hastelloy C4, C276 etc;Â
  Insulation: H, C, Super-C, etc
  Gasket: PTFE, Metal Spiral Wound etc
5). Flange Standard: ANSI, ASME, HG, DIN, JIS, GB, SH etc (2 times API nozzle loads)
6). Standard Ex-proof terminal box: Exd IIC T1-4, Exd IIBT1-4
7). High efficiency and cavitation performance design. Optional inducers available for minimum  NPSH requirements.
8). Automatic axial thrust balance design
Application of Canned Motor Non-seal Pump
Â
Description of Canned Motor Non-seal Pump
1).No Leakage
Suitable for handling flammable, explosive, toxic, corrosive and expensive fluids hermetically.
2).AirtightÂ
Suitable for handling vacuum tight system ,fluids that react to contact when contact with air.
3).No Shaft Seal
Suitable for handling high pressure system, high or lower temperature fluids, high melting point fluids.
4).No External Lubrication
Self-lubrication design,no lubrication required  for motor bearings and no lubrication levels to check or maintain.
5).Compact Design
Small, compact and self contained, installation costs are reduced with minimal foundation requirements.
6).Low Noise & Vibration
Totally enclosed with neither motor fans nor exposed bearings.
Â
1). Capacity: Q up to 1200m3/h
2). Head: H up to 800m
3). Fluid Temp. Range: -200 to 450°C
4). Material:Â
  Metallic: SS304/316316L; Hastelloy C4, C276 etc;Â
  Insulation: H, C, Super-C, etc
  Gasket: PTFE, Metal Spiral Wound etc
5). Flange Standard: ANSI, ASME, HG, DIN, JIS, GB, SH etc (2 times API nozzle loads)
6). Standard Ex-proof terminal box: Exd IIC T1-4, Exd IIBT1-4
7). High efficiency and cavitation performance design. Optional inducers available for minimum  NPSH requirements.
8). Automatic axial thrust balance design
Application of Canned Motor Non-seal Pump
Â
Description of Canned Motor Non-seal Pump
1).No Leakage
Suitable for handling flammable, explosive, toxic, corrosive and expensive fluids hermetically.
2).AirtightÂ
Suitable for handling vacuum tight system ,fluids that react to contact when contact with air.
3).No Shaft Seal
Suitable for handling high pressure system, high or lower temperature fluids, high melting point fluids.
4).No External Lubrication
Self-lubrication design,no lubrication required  for motor bearings and no lubrication levels to check or maintain.
5).Compact Design
Small, compact and self contained, installation costs are reduced with minimal foundation requirements.
6).Low Noise & Vibration
Totally enclosed with neither motor fans nor exposed bearings.
Â
