The control signal of the network dome can pass through the wireless bridge
Wrapping Paper Tape,paper wrapping tape,tape for glitter wrapping paper GUANGZHOU TUSEN MACHINERY & EQUIPMENT CO., LTD , https://www.gztusen.com
October 05 15:01:59, 2024
Wireless bridges are widely used in wireless monitoring projects. Due to their portable installation, stable use, and simple maintenance, wireless bridges are used by more and more industries.
Then there will be customers wondering if the control signals for the network dome can also be transmitted at the same time. The answer is yes. The wireless bridge as a replacement of the cable perfectly fulfills the purpose of transmission. The dome's video signal can be transmitted without doubt. The ball control signal can also be transmitted. In this way, as long as it is a network signal, it can be transmitted through a wireless bridge.
Having finished the control signal, what about the other data? For example, in some projects, not only video signals are transmitted, but also some corresponding data. If you want to transmit such data, what should you do? It is very simple, as long as the data to be transmitted is converted into a network, that is, a digital signal, it can be connected to a wireless bridge for transmission.
Also, if you need to transfer data, video, and signals at the same time, you can convert the non-network signals to network signals first, then transfer them through the switch and then transmit them through the wireless bridge.
There are a lot of original projects that use analog cameras, but the simulation can only be transmitted one to one, and some conditions do not allow it. The analog signal can be converted into a network signal through an encoder and then networked using a wireless bridge.
If you are unclear, you can consult Lean staff specifically and will give you the best solution based on your needs.