Because more and more people are buying cars now, and the sales of the car market both at home and abroad are very good, the regulation of the motor oil market has become mixed. Some of the three manufacturers and black workshops made some inferior oils to the market in order to generate profits. Some drivers purchased inferior products for the sake of cheapness and reduced the daily maintenance expenses of small cement mixers. After the engine oil not only fails to achieve the desired results, but also damages the engine of the small cement mixer truck and the failure of other system components. This is simply counterproductive. Therefore, when buying cement mixer oil, it is necessary to go to a regular sales shop to buy the right oil.

The oil of the small cement mixer on the market is basically able to meet the requirements of the four seasons, but it is not difficult to avoid replacing the filter of the vehicle due to the dust during the use of the oil. If you use oil in areas with high temperatures on weekdays, you need to pay more attention to the use of oil.

The current average temperature is between 34-36 degrees Celsius per day. If the oil used by the driver of the small cement mixer is not suitable, the oil pressure is too low or the oil pressure is too low. In severe cases, the vehicle will be The engine was damaged. Because the temperature is relatively high, the small cement mixer will be in a high temperature for a long time in the process of running. It will be easier for the lubricant to deteriorate, oxidize, and the viscosity will drop or even lose the lubrication. performance.

The lubricating oil of the small cement mixer will change with the temperature becoming higher. When the cement lubricating oil is under the influence of high temperature, the viscosity of the lubricating oil will drop, and it will easily lead to the lubricating oil. As the fuel consumption increases, it is necessary to check the dipstick more frequently during this season. If there is a lubricant defect, it is necessary to raise it immediately. In the summer, it is necessary to attach importance to the cooling system of the small-scale cement mixer. It is necessary to better protect the normal operation of the engine and avoid the occurrence of high-temperature overheating.

Mini Scissor Lift

1. The lift must be placed on a solid and flat ground to prevent tipping during operation.

2. Work according to the load specified on the nameplate. Overload is strictly prohibited. In case of emergency, the maximum allowable short-term overload is 10%.

3. Distribute the weight evenly in the center of the table as much as possible. Under special circumstances, allowable eccentric load: the longitudinal eccentric load shall not exceed 1 / 2 of the rated load, and the lateral eccentric load shall not exceed 1 / 3 of the rated load. The eccentric load must be about 300 mm away from the edge of the platform.

4. Materials that are easy to roll, such as pipes, must be blocked or bound properly.

5. It is forbidden to carry people on the lifting platform without manned protection. The lifting platform for carrying people is equipped with railings and anti crack valves. The anti crack valve can prevent the oil pipe from breaking and causing the workbench to fall out of control.

6. Prevent hands, feet and clothes from being squeezed when the elevator is working.

7. Press the "up" or "down" button to raise and lower the workbench. If the workbench does not move, stop the machine immediately for inspection.

8. If the lift does not lift and the overflow valve is heard, stop the machine immediately for inspection. Otherwise, the oil pump will overheat quickly and suffer serious damage. The overflow valve is used to protect the safety of the machine and operators, and cannot be adjusted arbitrarily.

9. Only when the workbench stops moving can the heavy objects be unloaded.

Mini Scissor Platform Lift Table,Mini Scissor Lift,Portable Lifting Table,Manual Scissor Lift Table

zhongcan machinery Co.,Ltd , https://www.zclift.com