Model NO.: LW30/80-3
Low-Voltage: Schneider
Motor: Chiese Top Servo Motor
Technique: Single Model and Double Helix
Programmable Logic Controller: Japan Mitsubishi PLC
Alarm: Alarm Device
Electic&Machinery: Taiwan Teco Electric
Unit Weight: 4200kg
Material: Galvanized Iron Wire
Application: Construction Wire Mesh
Surface Treatment: Galvanized
Trademark: JIAKE
Transport Package: Plastic Films/Woden Box
Specification: CE
Origin: Hebei, China
HS Code: 8463300000
I. DescriptionIllustration of working principle:
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the diamond size takes place. Different gap sized. After passing from the die of diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to the next stitch to take place.
Application: Chain Link Fence is extensively used as fences for playground and gardens, highway, railway, airport, port, residence, etc.
Advantages:1. It adopts the technique of single model and double helix and it can improve the work efficiency greatly.
2. Japan Mitsubishi PLC (Programmable Logic Controller)
3. French Schneider inverter
4. Chinese top servo motor (make the production more precise).
5. There are two ways for the side of chain link fence, one is twisted the other is with burr in edge.
6. There is a controller cabinet hanging and it can set the length of the wire mesh, once the weaving finish, it will stop.
7. An alarm device has been installed, once the production is completed, the alarm will ring. There is a limit switch and it can stop immediately.
8.Speed of die:500r/min
II.Technical Parameter
Model |
LW30/80-3/4 |
Width scope of weaving |
≤3m/4m |
Mesh scope of weaving |
25mm-80mm |
Wire scope |
3mm |
Outside size |
Main machine |
6700*1430*1800 |
Net reel |
5100*1700*1250 |
Motor |
Servo Motor |
5.5kw |
Cutter |
1.5kw |
Rolling |
0.75kw |
Raw Material |
Galvanized wire;PVC bag steel wire |
III.Diameter of Wire Mesh opening size
Diameter of Wire |
Mesh opening size |
1.8mm |
30-40mm |
2.0mm |
30-50mm |
2.2mm |
30-60mm |
2.5mm |
40-70mm |
2.8mm |
50-80mm |
3.0mm |
60-80mm |
3.2mm |
70-80mm |
3.5mm |
80-100mm |
4.0mm |
100mm*100mm |
IV.Commercial terms1. FOB price: 27800 USD FOB Xingang Port, China
2. Payment: 30% T/T in advance, the balance 70% by T/T after check the machine at seller's factory.
3. Minimum order quantity: 1Â set
4. Certification: ISO 9001 Certificate
5. Delivery time: 30 days from received your payment in advance.
6. Country of origin: China
7. Our guarantee time: 12 months after the equipment is accepted by the buyer, however, the guarantee period is no longer than 18 months after equipment's departure from Xingang port, China.
8. Installation: we could arrange our engineer install the machine in our factory.
V.Contact InformationÂ
Â
Â
Â
One Touch Pneumatic Fittings
â—Ž FEATURES
ã†One-Touch push-to-connect conflguration allows an instant tubing connection.
ã†Smoth-Edge release sleeve design facilitates a quick tubing disconnection.
ã†we can make both Brass or Nickel plated
color. Nickel plated ensures anti-contamination properties for an
extended product life.
ã†Pre-applied sealant on all external threads eliminates the additional sealing requirement.
ã†Internal and/or externalflat-to-flat
hexagonal con figurations for both metric and inch specifications allow a
proper tightening or directional orientation upon installation by using
L key or allen wrench for the applicable model types.
One Touch Pneumatic Fittings,Pneumatic Fittings,Pneumatic Pipe Connectors,Stainless Steel Pneumatic Fittings
Zhejiang Ideal Bell Technolody Co., Ltd , https://www.idealpneumatics.com