Twin-Tower Desiccant Air Dryer with Low Energy Consumption

March 22 05:07:44, 2020

Model NO.: Biteman Bseries heatless, BTGMXW106-B, 10.6m3/min
Flow Range: 10.6m3/Min, 375cfm
Modular Units Desiccant Chamber: Replaceable Factory Filled Desiccant Chamber
Pressure Dew Point: Minus 40 Centigrade Degree
Heat or Heatless: Heatless
Trademark: BITEMAN
Transport Package: Wooden Mounting
Specification: ISO9000, ISO8573.2
Origin: Shenzhen China
BITEMAN Modular units heatless desiccant air dryer

Unique features
-Less than 5% purge air without auxiliary equiment,012KW power consumption
-Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
-Small desiccan chambers' group,each chamber unit is independent and detachable
-Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -40C (-40F) is ensured
-The lowest operation cost,user could recoup  dryer investment in three years by saving huge air and electricity
-1/3 size to traditional dryer
-The shortest downtime
-Using Molecular sieve as desiccant
Twin-Tower Desiccant Air Dryer with Low Energy Consumption
Twin-Tower Desiccant Air Dryer with Low Energy Consumption
Twin-Tower Desiccant Air Dryer with Low Energy Consumption
 
Technical data
B-series            Heatless        (-40ºC dew point)
MODEL Port (inch) Flow rate (m³/min) Dimension (mm)
@5~6bar @6~7bar @7~10bar L W H
BTGMXW065-B G2 4.8 5.8 6.5 451 240 1628
BTGMXW085-B G2 6 7.4 8.5 560 240 1628
BTGMXW106-B G2 7.4 9.1 10.6 668 240 1628
BTGMXW146-B G2 9.8 12 14.6 885 240 1628
BTGMXW165-B G2 11.6 14.2 16.5 994 240 1628
BTGMXW206-B G3 14.6 17.8 20.6 763 480 1628
BTGMXW248-B G3 16.7 20.5 24.8 794 480 1628
BTGMXW295-B G3 21.5 26.3 29.5 903 480 1628
BTGMXW336-B G3 24.1 29.5 33.6 1012 480 1628
BTGMXW385-B G3 26.8 32.8 38.5 1121 480 1628
BTGMXW425-B G3 29.7 36.4 42.5 1230 480 1628
BTGMXW465-B G4 32.7 40.1 46.5 1339 480 1628
Marks
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air≤5%
         Pressure drop≤0.012MP
         Noise≤75dB(average);

B-series         Heat            (-40ºC dew point)
MODEL Port (inch) Flow rate (m³/min) Dimension (mm) Max Power
@5~6bar @6~7bar @7~10bar L W H Kw/1 Ph
BTGMXD065-B G2 4.8 5.8 6.5 451 240 1628 0.8
BTGMXD085-B G2 6 7.4 8.5 560 240 1628 1
BTGMXD106-B G2 7.4 9.1 10.6 668 240 1628 1
BTGMXD146-B G2 9.8 12 14.6 885 240 1628 1.4
BTGMXD165-B G2 11.6 14.2 16.5 994 240 1628 1.6
BTGMXD206-B G3 14.6 17.8 20.6 763 480 1628 2
BTGMXD248-B G3 16.7 20.5 24.8 794 480 1628 2.4
BTGMXD295-B G3 21.5 26.3 29.5 903 480 1628 2.8
BTGMXD336-B G3 24.1 29.5 33.6 1012 480 1628 3.2
BTGMXD385-B G3 26.8 32.8 38.5 1121 480 1628 3.6
BTGMXD425-B G3 29.7 36.4 42.5 1230 480 1628 4
BTGMXD465-B G4 32.7 40.1 46.5 1339 480 1628 4.4
Marks
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC;
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC;
Technical date:Pressure dew point≤-40ºC
         Purge air: ≤2%
         Pressure drop≤0.012MP
         Noise≤75dB(average);
For more
Twin-Tower Desiccant Air Dryer with Low Energy Consumption

 

Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.

Continuous Waste Tyre Pyrolysis Plant

Flowchat of Continuous Waste Tyre Pyrolysis Plant

Continuous Waste Tyre Pyrolysis Plant

Advantages of Continuous Waste Tyre Pyrolysis Plant

 1.  Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;

                  2.  Auto-loading, auto-discharging and oil coming out at the same time;

                  3.  Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;

                  4.  Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;

                 5.  High efficiency condensers, more oil output, good quality oil, easy to clean.

                 6.  Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.

                7.  National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.

               8.  Easy to operate, need less manpower.

 

Technical Parameter of Continuous Waste Tyre Pyrolysis Plant

          

NO.

ITEM

Technical Parameter

1

Suitable Raw Materials

Small pieces of Waste tyre,rubber, waste plastic≤5cm

2

Operating Mode

Fully Continuous Operation

3

Structure

Horizontal Type Revolve

4

Loading and discharging

Fully Automatic Feeding and Discharging under High Temperature at Same Time

5

Capacity(24h)

8-20Mt

6

Work Pressure

Slightly Negative Pressure

7

Oil Yield of tyres

40%-45%

8

Reactor Rotational Speed

1R/M

9

Installation Power

110kw

10

Cooling Method

Cycle water

11

Type of Drive

Sprocket Wheel

12

Heating Method

  Hot Air

13

Noise dB(A)

≤85

14

Main Reactor Weight (MT)

About 20Mt

15

Total Weight(MT)

About 45Mt

16

Installation Space Required

60m*20m

17

Manpower

2/shift

18

Shipment

5*40HC

19

Delivery time

≤70Days

 

 

 

 

 

 

Continuous Waste Tyre Pyrolysis Plant

Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com