UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code

Laser Classification: Solid Laser
Engraving Method: Vector Engraving
Power: 3W5w
Warranty: 3 Years
Working Area: 110*110/175*175/200*200/300*300mm(Optional)
Trademark: foster laser
Transport Package: Wood Package
Specification: 95*70*156cm
Origin: China
HS Code: 8456110090
Laser Classification: Solid Laser
Engraving Method: Vector Engraving
Power: 3W5w
Warranty: 3 Years
Working Area: 110*110/175*175/200*200/300*300mm(Optional)
Trademark: foster laser
Transport Package: Wood Package
Specification: 95*70*156cm
Origin: China
HS Code: 8456110090
UV laser marker 3W for acetate and plastic marking logo characters numbers bar code
What's the UV laser?
UV play labeling machine series products into the international advanced technology, high energy ultraviolet photons direct damage many nonmetallic materials surface molecules, molecules from the object, in this way will not produce high quantity of heat, ultraviolet laser gathering spot minim a and processing almost no heat affected, therefore is called cold processing, so it can be used to special material ultra fine marking and engraving.

UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code

Technical Parameters
Laser type FST-UV
 Laser wavelength 355nm
Laser power 3w/5w/7w/10w
Standard engraving range 100mm*100mm
Optional marking range 50mm*50mm,150mm*150mm, 180mm*180mm
Engraving speed less than or equal to 10000mm/s
Outline dimension (W*D*H) 95*70*156cm
Weight: 120kg
Power demand Ac220V + 10%.50Hz-60Hz.5Amp
Cooling mode Water Cooling
Operating temperature: 10-35 DEG C
humidity: 5%-75% (non-condensing)

Main configuration
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code

Product advantage:
1. Short UV laser wave length, smaller focused spot, can realize ultra fine marking;
2. is cold processing, small heat affected zone, avoid damage to materials to be processed, high rate of finished products
3. applicable materials widely, make up the deficiency of the infrared laser processing capacity;
4. using high-speed digital galvanometer marking speed, high efficiency, high precision;
5. without supplies, use cost and maintenance cost is low; the performance is stable, long-term operation.


Application materials
All glass, LCD, textiles ,thin slice ceramics , semiconductor silicon ,IC crystal, sapphire and polymers material marking or surface treatment.

Application industry
UV laser light spot is very small, and there is almost no heat affected, so it is called cold processing, which is suitable for special materials, super fine marking and engraving. Mainly used for ultra precision machining of the high-end market, cosmetics, medicines, food and other polymer materials of the surface of the packing bottle marking; flexible PCB board marking, dicing; silicon wafer micro hole, blind hole processing; LCD glass two-dimensional code marking, glassware play standard, metal surface coating removal, plastic buttons, electronic components, communication equipment.


Sample
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code


About us
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code


FAQ

1.How can I choose the most suitable machine ?

 Please tell us what kind of work you would like the machine to do ?Engraving,cutting,marking?

 What kind of materials mainly ? Cutting/engraving, Max thickness for cutting?

 How big working area you need?

2.How long can delivery the machine ?

Common machine can be delivered within 3~7 days.Customade machine need 12~14 days.

3.If there is any technical help after we receive the machine?

 Yes, we have perfect after-sale service team to supply technical support to our  customers.

 Our technical can assist you to install machine and give you free training after you   receive machine.

4.If there is some problems for some parts during warranty period, will your company repair or replace for me?

Yes, we will. Please send the main part back to our company,we will repair and send   back them to you for free within warranty time. If the problem part can not be repaired well ,we will send new one to you within warranty time for free.  PS:Not including the consumable parts and Man-made damage.

5.Will the machine will send to my door?

1)Usually for large size and heavy machine,we will quote CFR price. The best shipping way for the large and heavy goods is by sea or air.We ship the goods by sea for shipping free to your base seaport in your country(Need you  find broker help you to do customs clearance.

2)For small size machine, we can quote price with DHL express cost. Then the machine can send to your door.

6.Can I buy spare parts from your company if I have spare parts in the future?

  Yes,please.Our company supply spare parts for all of our machine.  

7.Give me reasons to chose your company ?

1)Professional factory with competitive price;

2)High quality control and perfect service: All of our machine are adopted top quality parts → Test machine work well for 3 days before delivery→sent working video and all items photos base on the order list to buyer to check ---→ buyer check everything is included and satisfied --→Professional plywood package to avoid damage→shipping machine

3)Supply technical support all life time for our machine;

 We have professional after-sale service team to supply technical support to our clients for free. You can talk with them at any time if you need.

4)Strict implementation of after-sales warranty.

5)The important is that you will receive the Corresponding goods after you do payment. 

8.How we pay you?

Please talk with us firstly.After we confirm the machine and optional part,spare parts for order with each other,we will give you the link to order.

Contact with us 
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code
  UV laser marker 3W for acetate and plastic marking logo characters numbers bar code
What's the UV laser?
UV play labeling machine series products into the international advanced technology, high energy ultraviolet photons direct damage many nonmetallic materials surface molecules, molecules from the object, in this way will not produce high quantity of heat, ultraviolet laser gathering spot minim a and processing almost no heat affected, therefore is called cold processing, so it can be used to special material ultra fine marking and engraving.

UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code

Technical Parameters
Laser type FST-UV
 Laser wavelength 355nm
Laser power 3w/5w/7w/10w
Standard engraving range 100mm*100mm
Optional marking range 50mm*50mm,150mm*150mm, 180mm*180mm
Engraving speed less than or equal to 10000mm/s
Outline dimension (W*D*H) 95*70*156cm
Weight: 120kg
Power demand Ac220V + 10%.50Hz-60Hz.5Amp
Cooling mode Water Cooling
Operating temperature: 10-35 DEG C
humidity: 5%-75% (non-condensing)

Main configuration
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code

Product advantage:
1. Short UV laser wave length, smaller focused spot, can realize ultra fine marking;
2. is cold processing, small heat affected zone, avoid damage to materials to be processed, high rate of finished products
3. applicable materials widely, make up the deficiency of the infrared laser processing capacity;
4. using high-speed digital galvanometer marking speed, high efficiency, high precision;
5. without supplies, use cost and maintenance cost is low; the performance is stable, long-term operation.


Application materials
All glass, LCD, textiles ,thin slice ceramics , semiconductor silicon ,IC crystal, sapphire and polymers material marking or surface treatment.

Application industry
UV laser light spot is very small, and there is almost no heat affected, so it is called cold processing, which is suitable for special materials, super fine marking and engraving. Mainly used for ultra precision machining of the high-end market, cosmetics, medicines, food and other polymer materials of the surface of the packing bottle marking; flexible PCB board marking, dicing; silicon wafer micro hole, blind hole processing; LCD glass two-dimensional code marking, glassware play standard, metal surface coating removal, plastic buttons, electronic components, communication equipment.


Sample
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code


About us
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code


FAQ

1.How can I choose the most suitable machine ?

 Please tell us what kind of work you would like the machine to do ?Engraving,cutting,marking?

 What kind of materials mainly ? Cutting/engraving, Max thickness for cutting?

 How big working area you need?

2.How long can delivery the machine ?

Common machine can be delivered within 3~7 days.Customade machine need 12~14 days.

3.If there is any technical help after we receive the machine?

 Yes, we have perfect after-sale service team to supply technical support to our  customers.

 Our technical can assist you to install machine and give you free training after you   receive machine.

4.If there is some problems for some parts during warranty period, will your company repair or replace for me?

Yes, we will. Please send the main part back to our company,we will repair and send   back them to you for free within warranty time. If the problem part can not be repaired well ,we will send new one to you within warranty time for free.  PS:Not including the consumable parts and Man-made damage.

5.Will the machine will send to my door?

1)Usually for large size and heavy machine,we will quote CFR price. The best shipping way for the large and heavy goods is by sea or air.We ship the goods by sea for shipping free to your base seaport in your country(Need you  find broker help you to do customs clearance.

2)For small size machine, we can quote price with DHL express cost. Then the machine can send to your door.

6.Can I buy spare parts from your company if I have spare parts in the future?

  Yes,please.Our company supply spare parts for all of our machine.  

7.Give me reasons to chose your company ?

1)Professional factory with competitive price;

2)High quality control and perfect service: All of our machine are adopted top quality parts → Test machine work well for 3 days before delivery→sent working video and all items photos base on the order list to buyer to check ---→ buyer check everything is included and satisfied --→Professional plywood package to avoid damage→shipping machine

3)Supply technical support all life time for our machine;

 We have professional after-sale service team to supply technical support to our clients for free. You can talk with them at any time if you need.

4)Strict implementation of after-sales warranty.

5)The important is that you will receive the Corresponding goods after you do payment. 

8.How we pay you?

Please talk with us firstly.After we confirm the machine and optional part,spare parts for order with each other,we will give you the link to order.

Contact with us 
UV Laser Marker 3W for Acetate and Plastic Marking Logo Characters Numbers Bar Code
 

Milky Flavor

Milky Flavor,Milky Feed Flavor,Milky Flavor For Feed,Milky Flavor Sweetner

Nanjing Jinshan Chemical Technology Co., Ltd , https://www.jinschem.com