VB-Z470B positive and negative monitoring tachometer

VB-Z470B positive and negative monitoring tachometer

According to the high and low speed of the object to be measured, comprehensive measurement can be carried out by means of frequency measurement and measurement. Rotating machinery, especially steam turbines, and the sudden rise in speed are one of the dangerous conditions of Zui, which may have catastrophic consequences. It is extremely important to measure the rise and fall speed of the unit during start and stop, and how to quickly pass the critical speed. The monitor can be equipped with a magnetoresistive sensor, an eddy current sensor and a Hall sensor to monitor the speed of the unit. It is mainly used for monitoring and protection of rotating machinery speed in industrial sectors such as electric power, petroleum and chemical industries.

Function description realizes intelligent processing: alarm I value and II value can be set arbitrarily through panel buttons;
If you do not press the operation button for 1 minute in the setting state, you can return to the measurement state by yourself.
The alarm delay adjustment range is 0.5~3 seconds to prevent false alarms caused by on-site interference;
It has the function of upper and lower power detection, and cuts off the alarm output circuit at the same time, which can effectively suppress the false alarm of the instrument;
The back plate has a current output proportional to the rotational speed value;
Set parameter password protection.

Main features: Each parameter can be set (modified) by panel button, the speed display is decimal point floating, with high precision 4-20mA output and pulse output, which can be easily connected with DCS system.

1. Main technical indicators

Speed ​​display: four-digit LED display, decimal point floating, one-tenth of a thousand precision (display value when the decimal point disappears × 10), the speed range is 0.001~6553×10rpm.

Acceleration display: three digit display, one symbol display, decimal point float, one thousandth precision (unit: rpm / sec).

Frequency display: Four-digit display, decimal point floating, in Hz.

Over-limit alarm: When the display value exceeds the set upper limit and limit, the panel red LED will light, the internal relay action (normally open contact lead) contact capacity is DC24V, 3A; AC220V, 3A, and will be more than before and after the limit 52 speed values ​​are stored in the E2PROM.

Input signal: 50mV~15V pulse or sinusoidal signal

Input impedance: ≥0.2MΩ (input signal is forward 3.6V diode limit)

Analog output: 4-20mA (0-10mA, 1-5V, 0-5V) one thousandth accuracy, full output speed is the set limit speed value.

Pulse output: optically coupled collector open gate (OC gate) pulse output

Power supply: 220VAC±10%, 45Hz~60Hz (85~264VAC, DC; 24VDC power supply is also available)

Volume: 160 × 80 × 80MM3 (width × height × depth)

Weight: about 1Kg

Working time: continuous

Working environment: atmospheric pressure 760±30mmHg, temperature 0-50°C, relative temperature <80%

Installation opening: 75+1×152+1mm2 (horizontal type)



VB-Z470B positive and negative monitoring tachometer


SZC-SAPN type tachometer

Main features: The number of transmission gears and the transmission proportional coefficient are solidified in the program (factory setting value: number of teeth: 60, coefficient 01.0000, which is indicated when the user has special requirements). The upper limit and limit value are freely set by the DIP switch in the table. The decimal point is fixed at the last digit.



1. Main technical indicators:



Speed ​​display: four-digit LED display, speed display integer, accuracy of one ten thousandth ± 1 turn (the last decimal point disappears when the speed is displayed value × 10) speed range 0 ~ 6553 × 10rpm.



Acceleration display: three digits display one symbol, decimal point floating, one thousandth precision (unit: rpm / sec)



Zhou Bo shows: four digits display decimal point floating, unit Hz



Over-limit alarm: The measured speed is compared with the preset limit. Once the over-limit lamp is turned on and the relay contact signal is output, the contact capacity is DC24V, 3A; AC 220V, 3A.



Input signal: 50mV-15V pulsed sinusoidal signal



Input impedance: ≥0.2MΩ (input signal is forward 3.6V diode limit)



Power supply: 220VAC±10% 45 Hz-60 Hz (85~264VAC, DC; 24VDC power supply is also available)



Volume: 160 × 80 × 80mm3 (width × height × depth)



Weight: about 1Kg



Working time: continuous



Working environment: atmospheric pressure 760±30mmHg, temperature 0-50°C, relative humidity <80%



Installation opening: 75+1×152+1mm2 (horizontal type)


Technical indicators electrical indicators external power supply:
Voltage: 220VAC ± 10%; Frequency: 50Hz; Power consumption: <10W.
Input signal: accepts an SZCB-01 magnetoresistive sensor output signal;
Waveform: pulse or sinusoidal signal;
Amplitude: 50mV to 20VAC (effective value);
Input impedance: >10KΩ.
Range: 1 to 9999 rpm.
display:
Display mode: four 0.8 inch LED digital tubes;
Display accuracy: ±1rpm;
Resolution: 1 rpm;
LED indication: alarm I value, alarm II value, red LED.
Number of teeth: 1 to 120 teeth.
Output:
Current output: DC 4 ~ 20mA four-wire system, accuracy ± 1%;
Output load: ≤500Ω
Alarm point settings:
Range: 0 to 100% of full scale;
Accuracy: ±0.5%.
Relay:
Seal: epoxy resin;
Contact capacity: 2A/250VAC or 1A/28VDC;
Node output: normally open contact.



1, to achieve intelligent processing: alarm I value, II value can be arbitrarily set through the panel button

2, the panel button can adjust the range value, no potentiometer adjustment, convenient on-site debugging

3, the number of teeth can be arbitrarily set through the panel buttons

4. The alarm delay adjustment range is 0.1~3 seconds to prevent false alarms caused by on-site interference.

5, with upper and lower power detection function, at the same time cut off the alarm, stop the output circuit, can effectively suppress the instrument false alarm

6. The rear panel has a current output terminal proportional to the value of the rotation for recording and output technical indicators.

Electrical indicators:

1. External power supply; 220VAC 50Hz 2A



2. Input signal: accept a SZCB-01 magnetoresistive sensor signal waveform: sine wave or pulse amplitude: ≥10VAC (effective value)
Input impedance: >10KΩ

3, range: 1 ~ 9999rpm

4, display display mode: four 0.8 inch LED digital display display accuracy: ± 1 rpm
Photocell LED indication: machine field operation status

5, the number of teeth: 1 ~ 255 any

6, output current output: 4 ~ 20mA active output load: ≤ 500Ω

7. Alarm point setting range: 0~100% full scale accuracy: ±0.1%

8, relay seal: epoxy resin node capacity: 2A/220VAC or 1A/28VDC
Node output: normally open contact

9, RS485 communication interface: for parameter programming combination baud rate: 9.6K ~ 38.4Kbps

Environmental indicators:
Temperature range operation: 0 ° C ~ +65 ° C
When storing: -30 ° C ~ +80 ° C
Relative humidity: up to 95%, no condensation

Physical indicators:
Dimensions: 160 × 80 × 200mm
Opening size: 152+1×74+1 mm
Weight: 1.5Kg



Ordering guide

Intelligent high tachometer must be equipped with WT eddy current sensor forming system

HZS-04- Aâ–¡ - Bâ–¡ - Câ–¡ - Dâ–¡- Eâ–¡

Selection instructions

Range range A□: 1——0~1500rpm; 2*——0~3500rpm; 3——0~6000rpm

Sensor selection B□: 1*——SZCB-01; 2——WT-Φ8mm

Number of teeth is selected C: 1 - 6 teeth; 2 * - 60 teeth; 3 - 120 teeth

Alarm delay Dâ–¡: 1 - 0.1 seconds; 2 * - 1 second; 3 - 3 seconds

Communication interface E□: 1 – has 485 communication interface; 2* – no communication interface



1. Highly intelligent, parameter settings for full board operation. Suitable for long-term online monitoring, easy to install and debug, no on-site maintenance.
3. Zero speed, forward and reverse, alarm, dangerous switch output. 4. With 4 ~ 20mA current analog output.
5. Range, alarm, danger, and overspeed values ​​can be set arbitrarily. 6. Zui big value memory and query.
7. The zero speed monitor is capable of accurately measuring low speeds. 8. The anti-rotation monitoring and protection device is mainly for forward and reverse monitoring and display.





Technical Parameters




1. Display mode: LED digital display
2. Measuring range: 0~9999 rpm (high speed measuring range 0~99999 rev / min)
3. Measurement accuracy: ±1 rpm
4. Number of teeth setting: 1~120 teeth arbitrary setting (factory value 60 teeth)
5. Input signal: JM-C-3 speed monitor: CS-1 sensor signal, CS-3 sensor signal
JM-C-3L zero speed monitor: CS-3 sensor signal, CWY-DO-Φ8mm eddy current sensor
JM-C-3G high speed monitor: CS-1 sensor signal, CS-3 sensor signal
JM-C-3F anti-speed monitoring and protection device: 2 CS-3 sensor signals, CS-3F sensor signal



JM-C-3W emergency interrupting speed monitoring and protection device: 3 CS-1 sensor signals
6. Output signal: Current output: 4 ~ 20mA (load ≤ 1KΩ)
Three-level switching output: DC 27V/2A or AC250V/5A
7. Ambient temperature: Temperature -10 ~ 65 ° C (relative humidity ≤ 85%)
8. Supply voltage: AC 220V/50Hz (±10%) Power consumption ≤5W
9. Installation method: disc type
10. Dimensions: Regular style: 95mm (height) × 170mm (length) × 260mm (deep)
11. Opening size: Regular style: 77mm (height) × 152mm (long)





Ordering guide




JM-CAâ–¡â–¡-Bâ–¡â–¡-Câ–¡â–¡â–¡â–¡
A: Model selection 01: JM-C-3 intelligent speed monitor, 02: JM-C-3L intelligent zero speed monitor,
03: JM-C-3F intelligent anti-speed monitoring and protection instrument, 04: JM-C-3G intelligent high-speed monitor,
05: JM-C-3W intelligent emergency interrupting speed monitoring and protection device
B: Sensor selection 01: CS-1 passive speed sensor, 02: CS-3 active speed sensor
03: CS-3F reverse speed sensor, 04: CWY-DO-Φ8mm eddy current sensor
C: Range 0-9999rpm, for example: 4000=4000rpm
Example: The intelligent speed monitor with 4000 rpm and active speed sensor is coded as JM-C-01-02-4000



Sensor input method of intelligent tachometer: magnetoresistive sensor

Speed ​​plate gear teeth: 1~120 tooth overspeed protection and speed alarm

The intelligent tachometer has two speed alarm limit values. As long as the measured speed exceeds the set alarm value or dangerous value, the alarm indicator or danger indicator on the front panel lights up, and the alarm relay or dangerous relay operates, and the switch signal is output. The alarm response time is 0.1S.

The main technical indicators show: 5-digit 0.8-inch LED digital display range: 1~99999rpm
Display accuracy: ±1rpm
Alarm, danger: Arbitrary setting alarm output in full scale: Normally open relay output contact capacity: 5A/250VAC 30VDC/5A
Current output: 4~20mA
RS485 communication: MODBUS-RTU protocol (optional)
Dimensions: 160 × 80 × 160mm
Opening size: 152+1×74+1mm

SG-2 vibration sensor KR-939B fan safety operation monitor, KR-939B3 fan safety monitor, KR-939B4 fan safety monitor, KR-939B4-4 equipment safety monitor, KR-32 dual channel Equipment safety monitor, KR-34 four-channel equipment safety monitor, KR-939NCS type fan speed frequency meter

VB-Z500B Rotating Machinery Condition Monitoring and Protection Table, VB-Z412 Dual Channel Shaft Displacement/Expansion Difference Monitor, VB-Z410/410A Shaft Displacement/Differential Expansion Monitor, VB-Z430F Dual Channel Bearing Vibration Monitor, VB-Z430 Double Channel bearing vibration monitor

VB-Z720 dual channel water swing monitor, VB-Z730 dual channel water vibration monitor, VB-Z420 dual channel vibration monitor, VB-Z470B wall mount positive and negative monitor, VB-Z470 positive and negative Monitor, VB-Z440 speed monitor

XZD-LG wall-mounted vibration intensity monitor, XZD-L vibration intensity monitor, XZD-4 four-channel vibration monitor, XZW-D axial displacement, differential monitor, XZS-04 intelligent speed monitoring Instrument, XZD-Z type shaft vibration monitor, XCW-R type thermal expansion stroke monitor, XCW-U type tank oil level monitor, XCW-Y oil motor stroke monitor, XZD-W type vibration monitor JM-C- 3 speed monitoring SZC-KYPN, SZC-SAPN tachometer test protection device

WB8100E Rotating Machinery Monitoring Instrument, WB8600EH Hydrogenerator Unit Status Monitoring Instrument, WB8800E Rotating
JM-C-3 speed monitoring and protection device
SZC-04 series intelligent tachometer, SZC-04F series intelligent speed anti-rotometer, DZC-02A tachometer

HZD-8500/C/D turbine monitoring and protection device, HZD-RSDC type overspeed protection device, 8500B rotating machinery monitoring and protection system, HZW type axial displacement monitor, HZW-Z type intelligent differential expansion monitor, HZS-04N type intelligent Tachometer


OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165 eddy current axis displacement sensor shaft vibration Probe front end

EC-001/EC-002/EC-003 eddy current axis displacement sensor shaft vibration probe extension cable

PR6422/PR6423/PR6424/PR6425/PR6426 eddy current axis displacement sensor shaft vibration probe CON011/91,

Technical parameter sensitivity 20~50mv/mm/s±1% (according to user adjustment) Frequency response (optional) 5~100hz, 10~500hz, 10~1000hz natural frequency about 10hz amplitude limit 2mm (peak-peak) Zui large acceleration 10g installation method vertical; horizontal; vertical, horizontal dual-use temperature range -30 ° C ~ 120 ° C relative humidity to 95% non-condensing Dimensions φ 35 × 78mm weight about 350g installation thread m10 × 1.5 ordering guide selection code trlv-a □ □-b□□Selection Description Sensitivity a□□01——20mv/mm/s; 02——30mv/mm/s; 03——50mv/mm/s measurement direction b□□01——vertical; 02— - level; 03 - vertical and horizontal dual-purpose sz-5/sz-6/sz-6b/trlv/tm0793v/tm079vd/9200/74712/47633 magnetic vibration vibration speed sensor cd-1/cd-2/cd- 4/cd-4a/cd-6/cd-6a/cd-7-c/cd-7-s/cd-8/watt cover vibration sensor cd-21-2-c/cd-21-2-s/ Cd-21-t/cd-21c/s/bcd-21a/cd721/wind vibration speed sensor mls-9/mlv-6/mlv-7/mlv-8/mlv-9200/mlv-9268/mlv-27/ Mt1/mt2t/mt3t/mt3m/vibration sensor cs-cd-001/cs-cd-010/od9200/od9300/s6000/pr9266/pr9268/20/30/60/70/bearing vibration sensor mlv-9200 (16699/900 )/9200/74SZC -KYPN,SZC-SAPN tachometer 712/47633/ht-2zd-24/zd25/zdf bearing vibration speed sensor vb-z9500/vb-z9600/sj1061/sj1062 magnetoelectric vibration speed sensor tm0782a/tm0783a/ca-yd/ Yd/kd/tm0782a/winh/mta/pr9270/shq-25x/200150/200155/200157/200350/200355/ca-gt acceleration sensor lvdt displacement sensor 1000td2000td3000td4000td5000td6000tdczj-b2/cz-6/cjz-d/cjz-d2/ Mli-2001/wb-9902/wb-8112b/zj2/zj2-a/bearing vibration monitoring and protection instrument 8500/85100xy/85564/85200/85850bcd-21a/vibrocontrol110/en900/en2000a1/vibration monitoring instrument zxp-f3200/zxp- J116/zxp-j200/zxp-j210/zxp-j220/dzx-400/pdm1201/wli-2004/wli-2003/wli-2001/s2662/vrs2000a11/wli-2011/pt2010/11 dual-channel bearing vibration monitor zxp -j400/zxp-j510/zxp-j520/xd-2/xzk-1/od-9008s/Double-channel tile cover vibration measuring instrument od9004/s2162/s2112/vb-z420/vb-z430/vrs2000a11/vrs2000a1 vibration monitor Vrs2000a3/vrs2000a4st-101/emt226/vib-10b/vib-5/zdy/pt908/sj-2011 bearing vibration monitoring instrument sj-2012/sj-2031/sj-2021/sj-2022/sj-2051/sj-2052 Vibration detection and protection device

SZCB-01/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01 Reluctance Speed ​​Sensor
4/HY-TACH intelligent tachometer instrumentation

VB-Z410/VB-Z440/VB-Z470/VRS2000A7/XHF-201/WB-8581/Intelligent Speedometer
XJP-02A/XJP-02B/XJP-10B/XJP-15/XJP-16/XJP—42AB/XJP-48B/XJP-48E/XJP-71/XSZ-01/XSZ-02XJP—18B/SZC—01020304/ SZC—04KY intelligent digital speed display instrument
AI-TEK speed sensor / controller, tachometer, cable... 70082-1000 speed sensor series 70084-1000 speed sensor series 70084-1713 speed sensor series 70085-1010 speed sensor series 70087-3040 speed sensor series H1320 -001 Series H1512-001 Series H1522-001 Series H1612-001 Series BH1512-001 Series N1512-009* Series N1612-003* Series BH1522-001 Series BH1612-001 Series BH1622-001 Series T77220 Tachometer Series T77310 Tachometer Series T77430 Tachometer Series CN79860 Cable Series 646-310 Series 646-140 Series 70085-8080-001 Speed ​​Sensor 70085-8080-003 Speed ​​Sensor 7008570082-1000 Speed ​​Sensor 70084-1000 Speed ​​Sensor 70084-1713 Speed ​​Sensor 70085-1010 Speed ​​Sensor 70087- 3040 Speed ​​sensor H1320-001 H1512-001 H1522-001 H1612-001 BH1512-001 N1512-009* N1612-003*BH1522-001 BH1612-001 BH1622-001 T77220 Tachometer T77310 Tachometer T77430 Tachometer CN79860 Cable 646-310 646 -140

DF9032/WB-8531C/HAWY-01A Relative Expansion Thermal Expansion Monitor Instrumentation SW-2/TD-2 Displacement Monitor Instrumentation 24765 Case Expansion Sensor DF5601
3500/3300/7200/PT2060/PT2010/RMS700/MMS3000/MMS6000/VB4000/TN8000/WIN2000/VM600/EN8000/EN9000/MV2000/MV3000/S8100/8500/9000/ZXP-JK6600/S32000/S36000/8000B Series Rotating Machinery Monitoring protection device
XJTM-02 type display alarm instrument VB-Z9500/VB-Z9600/SJ1061/SJ1062 magnetoelectric vibration speed sensor
TM0782A/TM0783A/CA-YD/YD/KD/TM0782A/WINH/MTA/PR9270/SHQ-25X/200150/200155/
200157/200350/200355/ CA-GT Accelerometer
LVDT Displacement Sensor 1000TD 2000TD 3000TD 4000TD 5000TD 6000TD
CZJ-B2/CZ-6/CJZ-D/CJZ-D2/MLI-2001/WB-9902/WB-8112B/ZJ2/ZJ2-A/Axis vibration monitoring and protection device
8500/85100XY/85564/85200/85850BCD-21A/VIBROCONTROL110/ EN900/EN2000A1/Vibration Monitoring Instrument
ZXP-F3200/ZXP-J116/ZXP-J200/ZXP-J210/ZXP—J220/DZX-400/PDM1201/WLI-
2004/WLI-2003/WLI-2001/S2662/
VRS2000A11/
WLI-2011/PT2010/11 dual channel bearing vibration monitor

ZXP-J400/ZXP—J510/ZXP—J520/XD-2/XZK-1/OD-9008S/Double-channel tile cover vibration measuring instrument
OD9004/S2162/S2112/VB-Z420/VB-Z430/VRS2000A11/VRS2000A1 vibration monitor
VRS2000A3/VRS2000A4ST-101/EMT226/VIB-10b/VIB-5/ZDY/PT908/SJ-2011 bearing vibration monitoring instrument
SJ-2012/SJ-2031/SJ-2021/SJ-2022/SJ-2051/SJ-2052 vibration detection and protection device
TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/ eddy current displacement sensor HZS-04 intelligent speed monitor
SD081082/85811/TM0180/TM0105/TM0 VS-068/VS-069/VS-077/VS-079/VS-080/VS-168/VS-169/VS-177/VS-277/VS-288/VS -289/Watt vibration speed sensor

PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 electric absolute vibration tile sensor

PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor

TM0782A-K/TM0783A/TM0793V-K/TM079VD Watt Vibration Sensor PT079VD Low Frequency Magnetoelectric Speed ​​Displacement Sensor

Tr81/dwqz/trin/7200/3300/pr6422/pr6423/pr6424/pr6425/pr6426/ eddy current displacement sensor sd081082/85811/tm0180/tm0105/tm0182/winw/qh8500/se/cwy-do/axial displacement sensor ky8500/ Od9000/9000xl/s2100/s2200/vb-z9100/mlw3300/wd220 non-contact displacement sensor rdzw-2na/czqz/rdzw-2/rdzw-2n/wb-8501c/8521c/8531c/85300-dw/axial displacement monitoring protection Instrument 85350/85710/en2000a2/hy-01/tpm/dtpm/od9006/s2102/vrs2000a2/axial displacement detection monitor rdzw-2na/czqx/rdcz/rdcz-2/85710/hy-02/dem/ddem/s2161a /vrs2000a5/Expansion monitoring and protection device szcb-01/pr9376/sm-10/12/14/16/t-03/szmb-5/9/szmb-01 magnetoresistive speed sensor smcb-01/s16/sms- 12/16/e12-e12s-e58a-e58s/d12-d12p/f12a-f12s-f58a-mechanical monitoring system, WB8501C digital display axial displacement monitor, WB-8381GE intelligent speed monitor, MLI-2001 dual channel vibration Monitor, XSM series tachometer, WB8521C digital display relative expansion monitor, WB-8531C digital display thermal expansion monitor, WB-8112B digital display dual channel vibration monitor

SMCB-01/S16/SMS-12/16/E12-E12S-E58A-E58S/D12-D12P/F12A-F12S-F58A-F58S/
Y12AD/DSD/DSF/DSE/DSH magnetic sensitive speed sensor
HK-16/CM16/S16/HB2032/SC12-20K/GVS Gear Speed ​​Sensor
DZC-02/DZC-02A tachometer SZC-KYPN, SZC-SAPN tachometer
DM504/HY-ZS3/WZ-7A anti-rotation speed monitoring and protection table
HY-ZS3F anti-speed sensor
SZC-04/SZC-04B/85700/85790/JMS/HY-01/XSM intelligent tachometer monitoring and protection device
XJP-10B/02A/42A/XSV-01/SQY01T/MFT/SQY11-04/RAS/SKY/SZC/SQYC/CS-1/
SQY01/QYDPM/SQY08TD intelligent speed digital display
AI-TEK (AIRPAX)/Tach-pak1Tach-pak3Tachtrol2Tachtrol3/MV-VI intelligent speed monitor
WZ-3C/WZ-1D/WZ-6A/AI-TEK(AIRPAX)/EN2000A3SZC-04/SZC-04B/Intelligent Speed ​​Measuring Instrument
HY-ZS1/HY-ZS2A/HY-BT1/HY-ZS2/HY-ZS3/HY-CS1/OD9001/S2183/S2181/Smart Tachometer
VB-Z410/VB-Z440/VB-Z470/ VRS2000A7/ XHF-201/WB-8581 intelligent speedometer

DF9032 thermal expansion monitor
3500/3300/7200/PT2060/PT2010/RMS700/MMS3000/MMS6000/VB4000/TN8000/WI
N2000/VM600/EN8000/EN9000/MV2000/MV3000/S8100/8500/9000/ZXP—JK6600/S32000/
S36000/8000B series rotating machinery monitoring and protection device
TR2001/TR2011/TR2031/TR2061/TR2081/TRZF/TR95 transmitter
DTM/TM101/TM201/TM301/SLM/WINV/EN2000A4/EN2000A5/EN2000A6/VIB-15a/Transmitter
ZXP-T100/ZXP-T110/ZXP-T120/WZ-5A/WZ-5B/ZD24-ZF-1/ZD24-ZF-2 Transmitter
OD92 SLMCD-21T/ WINYV/ ZD8133/
OD9200T/MLS/V-9/ FZB/YMLV/JX73/JX73ST/BJ230 integrated vibration transmission

00-B/S9210/S9220/S9260/S9860/02/S9820/02/S9881/01/JX5151/JX5121 Transmitter
VB-Z330/VB-Z310/VB-Z320/MMS3110/MMS3120/MMS3210/MMS3311/MMS3410/VRS20/MLV/D Transmitter HR-2000/TR4101/
SJ6011/SJ6021/SJ6031 Transmitter

TM0540/3300XL/WIN-400/HY-XY1/OD—9003(A/B)/S21310/VRS4000/XQ-15/DZ-30 Eddy Current Probe Static Calibrator

021/PRA13022 speed monitoring controller meter frequency - analog converter

WZ-7A-A/WZ-7A-B reverse alarm speed meter
HY-ZS1/HY-ZS2A/HY-BT1/HY-ZS2/HY-ZS3/HY-CS1/OD9001/S2183/S2181/MSC-2A/MSC-



JM-B-6Z monitoring and protection device, JM-B-6000 steam turbine monitoring and protection device, JM-B-3E dual channel vibration monitoring and protection device, JM-B-7 intelligent vibration monitoring and protection instrument, JM-B-201 intelligent vibration temperature Detector, JM-B-4 vibration temperature monitoring and protection device, JM-B-3Z intelligent vibration monitoring and protection device, JM-B-6Z (402) monitoring and protection device, JM-B-5S vibration monitoring and protection device, JM-X -3 series intelligent travel monitoring and protection instrument, JM-X-3W intelligent axial displacement monitoring and protection instrument, JM-X-3Z intelligent differential expansion monitoring and protection instrument, JM-C-3 series intelligent speed monitoring and protection instrument, JM-C- 7F wall-mounted anti-rotation speed monitoring and protection instrument, JM-C-5S speed monitoring and protection instrument, JM-C-6C three take two speeding monitoring and protection instrument

8000/B/C/E series combined monitoring and protection device, RDZW series axial displacement monitor, RDCZ series differential expansion monitor, RDXZ series shaft vibration monitor, CZJ-B series vibration monitor, CZJ-4D type four channel Vibration monitor f58s/y12ad/dsd/dsf/dse/dsh magnetic sensitive speed sensor hk-16/cm16/s16/hb2032/sc12-20k/gvs gear speed sensor dzc-02/dzc-02a tachometer dm504/hy- Zs3/szc-04f1/wz-7a anti-speed detection monitoring protection table hy-zs3f anti-speed sensor szc-04/szc-04b/szc-04f/85700/85790/jms/hy-01/xsm/df9011 intelligent tachometer monitoring Protection instrument xjp-10b/02a/42a/xsv-01/sqy01t/mft/sqy11-04/ras/sky/szc/sqyc/cs-1/sqy01/qydpm/sqy08td intelligent speed digital display instrument ai-tek (airpax) /tach-pak1tach-pak3tachtrol2tachtrol3/mv-vi intelligent speed monitor wz-3c/wz-1d/wz-6a/ai-tek(airpax)/en2000a3/ intelligent speed measuring instrument hy-zs1/hy-zs2a/hy-bt1 /hy-zs2/hy-z cylinder expansion transmitter

DTM10 eddy current sensor monitoring module DTM10-201 radial vibration monitoring instrument DTM10-202 axial displacement monitoring instrument
DTM10-301 radial vibration monitoring instrument DTM10-302 axial displacement monitoring instrument DTM10-501 speed / key phase monitoring instrument
DTM10-502 speed / key phase monitoring instrument DTM20 intelligent digital chassis vibration monitoring instrument DTM20-101 chassis vibration monitoring instrument
TM900 Power ConverterTM101 Acceleration, Speed, Displacement Vibration Protection Meter TM201/TR4101 Shaft Vibration Transmitter Protection Meter
TM202/TR4102 shaft position expansion differential transmission protection instrument TM301 shaft vibration transmission protection instrument TM302 shaft position transmission protection instrument
TM501 speed key phase monitoring instrument TM502 speed key phase monitoring instrument
TM0302/TM0306 all weather protection box TM0312/TM0314 explosion-proof enclosure TM0393 eddy current probe housing
TM0510-K Portable Vibration Calibration Table TM0520-K Portable Adjustable Frequency Vibration Calibration Table TM0540 Portable Eddy Current Sensor Static Calibration Instrument PT908 Portable Vibration, Bearing Measuring Instrument Portable Speed ​​Sensor Calibration Table
VIBROCONTROL 800/VIBROCONTROL 868/VIBROCONTROL 869 bearing vibration wobble switch
VIBROCONTROL 920 bearing vibration monitor instrument VIBROCONTROL 1000 bearing vibration tile vibration transmitter
VIBROCONTROL 1100/VC 1100 C01/VC 1100 C02/VC 1100 C11/VC 1100 C12 Bearing Vibration Transmitter
VIBROCONTROL 4000/VB-410/VB-420/VB-430/CI-411/CI-421/CI-431 Mechanical Protection System
VIBROCONTROL 6000/CV-114/CV-112/CV-101/BC-112/RV-117/AP-327 mechanical protection system
AS-020/AS-022/AS-030/AS-060/AS-062/AS-065/AS-070/AS-080/4391/4391E/5704/5874/5958/8315/8324/8325/8326/ 8327/8331/8332 accelerometer
330500/330525/330750/190501/9200/74712/47633/330400/330425/200350/200150/200155/350900/26530/9200/74712/47633 wattage speed sensor wattage probe 9200-01-05-10-00 watt Shock probe 21000-16-10-15-050-03-02

HY-101/HY-102/HY-103/HY-103B/HY-103C/HY-103E/HY-104/HY-105/HY-106/HY-106C/HY-107/HY-107R/HY- 108/HY-109A vibration meter
VIBRA double channel tile vibration monitor instrument CZ-6/6c dual channel digital display vibration instrument
CZJ-B2/CZJ-B3/CZJ-B3G/CZJ-B4/CZJ-B4G/CZ-6/CJZ-D/CJZ-D2/MLI-2001/WB-9902/WB-8112B/ZJ2/ZJ2-A double Channel wall-mounted roof vibration measuring instrument bearing bush vibration monitoring and protection instrument
8500LD/85100XY/85564/85200/85850BCD-21A/VIBROCONTROL110/EN900/EN2000A1/Double-channel tile vibration monitor instrumentation
ZXP-F3200/ZXP-J116/ZXP-J200/ZXP-J210/ZXP—J220/DZX-400/PDM1201/WLI-2004/WLI-2003/WPDM1201/LI-2001/S2662/VRS2000A11/WLI-2011/PT2010/ 11 dual channel tile shock bearing vibration monitor instrument
ZXP-J400/ZXP—J510/ZXP—J520/XD-2/XZK-1/OD-9008S/Double-channel tile cover vibration meter measurement instrument
OD9004/S2162/S2112/VB-Z420/VB-Z430/VRS2000A11/VRS2000A1 dual channel vibration monitor instrument
VRS2000A3/VRS2000A4ST-101/EMT226/VIB-10b/VIB-5/ZDY/PT908/SJ-2011/RDXZ/RDXZ-2 dual-channel bearing vibration tile vibration monitor instrumentation
SJ-2012/SJ-2031/SJ-2021/SJ-2022/SJ-2051/SJ-2052/TK77/TK81 dual channel tile vibration detection and protection instrument
SZ-S/SZ-SC/SZ-6B/SZ-4/SZ-5/SZ-6/SZ-6B/SZ-6C/SZ-6I/TRLV/TM0793V/TM079VD/WZTK-24/EN 080/EN 090 dual channel magnetoelectric vibration speed tile sensor
CD-1/CD-2/CD-4/CD-4A/CD-6/CD-6A/CD-7-C/CD-7-S/CD-8/Double-channel tile cover vibration sensor
CD-21-2-C/CD-21-2-S/CD-21-T/CD-21-TA/CD-21C/S/BCD-21A/CD721/WIND Watt Vibration Velocity Sensor
MLS-9W/MLV-9W/MLV-6/MLV-7/MLV-8/MLV-9200/MLV-9268/MLV-27/MT1/MT2T/MT3T/MT3M vibration tile sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/Axis vibration vibration sensor
MLV-9200 (16699/900)/9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed sensor
VB-Z9500/VB-Z9600/SJ1061/SJ1062 magnetoelectric vibration speed tile sensor
TM0782A/TM0783A/CA-YD/YD/KD/TM0782A/WINH/MTA/PR9270/SHQ-25X/200150/200155/200157/200350/200355/CA-GT Acceleration Sensor Portable Speed ​​Sensor Calibration Table Six-Wire LVDT Displacement Sensor 1000TD 2000TD 3000TD 4000TD 5000TD 6000TD 7000TD 8000TD 9000TD 10000TD 11000TD 12000TD Three-wire LVDT displacement sensor HR-DC displacement sensor, 3000HR-DC, 1000HR-DC, 500HR-DC, 200HR, 500HR, 1000HR, 2000HR, 3000HR, 5000HR, 10000HR PTS420 Displacement Sensor, PTS420 Position Transmitter, PTS420-5000 Position Sensor, PTS420-10000 HCT420 Displacement Sensor, HCT420 Position Transmitter, HCT420-5000 Position Sensor, HCT10000, HCT IS5000, HCT IS 10000 GCA/GCD Rebound Displacement sensor, GCA rebound displacement sensor, GCD rebound displacement sensor, GCD-SE, HC485 LBB ultra-precision displacement sensor, LBB-315PA, LBB-375PA
ATML-M1450-0600AT100/BTL5-E10-M0350-P-S32 Displacement Sensor JY PRT LVDT Shift Sensor




SMU9000/SMU9200/KD2300/KD2306/KD2440/KD2446/KD2446-9C/KD2446-5CM/KUDA/8000/SMU-9000/9200/KD-5100/DIT-5200/GageProx/ThreadChecker eddy current displacement sensor shaft vibration probe front Device
EP080/EP200/EP340/EP480 eddy current axis displacement sensor shaft vibration probe
ECPD/ECPD/85/ECPD/60/ECPD-2 eddy current axis displacement sensor shaft vibration probe front end
330301/330302/330303/330601/330602/330603/330604/330851/130713 eddy current axis displacement sensor shaft vibration probe
330101/330102/330103/330104/330105/330106/330140/330141/330191/330192/330193/330194/330195/330196/330197/330198 eddy current displacement sensor shaft vibration probe
330701/330702/330703/330704/330705/330706/330707/330708/330709/330710 eddy current axis displacement sensor shaft vibration probe
330901/330902/330903/330904/330905/330906/330907/330908/330909/330910 eddy current axis displacement sensor shaft vibration probe
330600/330180/330780/330850/330300/330980 eddy current axis displacement sensor shaft vibration probe front end
330630/330130/330190/330730/330854/330330/132501/330930/8200 eddy current axis displacement sensor shaft vibration probe extension cable eddy current sensor DF310880/CWY-DO 810803-00-03-10-02
DWQZ8108-01/8108-02/8108-03/8111-01/8111-02/8111-03/8125-01/8125-02/8125-03/8200/8300/QRD/HRD rod eddy current axis displacement sensor Shaft vibration probe front end QZHF-1 front guard cover

SDW-i/TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/CWY-DO/8108-01/8108-02/8108-03/8111-01/8111-02/8111- 03/8125-01/8125-02/8125-03/CWY-DO-20T08 eddy current axis displacement sensor shaft vibration probe front end
SD081082/85811/TM0180/TM0105/TM0182/WINW/QH8500/SE/CWY-DO/8300/HTW Axial Displacement Sensor Shaft Vibration Probe Front End
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/WD220/QRD/HRD/QZHF rod non-contact displacement sensor shaft vibration probe front-end
RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/85300-DW/16C4-A axial displacement monitoring and protection instrument display table
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/VRS2000A2/HZWY-20A/ZQZ-10/ZQZ-11/ZQZ-21/ZQZ-II axial displacement detection monitor instrument turbine axial displacement Measuring protection device
RDZW-2Na/CZQX/RDCZ/RDCZ-2Na/85710/HY-02/DEM/DDEM/S2161A/VRS2000A5/HZWY-20A/WB-8521C Differential monitoring and protection instrument meter relative expansion monitor instrument

S-ZS/SZCB-01/SZCB-02/SZCB-03/SZCB-04/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01/SZMB-3/ SZMB-4/ZS-01/ZS-03/ZS-02/ZS-04/KMY20M/KMY/Z20S/KMY20M1/SM6-XS12JK-3P/Y-XG-3 Magnetoresistive Speed ​​Sensor
SZMB-5/SZMB-5-B/SZMB-5T/SZMB-7/SZMB-8/SZMB-9SZMB-9/SZMB-9-B/SZMB-10/SZMB-10/SZMB-11/SZMB-12/ SZMB-14/SZMB-16/SZMB-18/explosion-proof magnetic speed sensor
SMCB-01/SZMZ—01/SZMZ—02/S16/SMS-12/16/E12-E12S-E58A-E58S/D12-D12P/F12A-F12S-F58A-S-HC/F58S/Y12AD/DSD/DSF/ DSE/DSH/km115-1/km115-2/km115-3/km115-4/magnetic sensitive speed sensor
TD-02/TD-03/HK-16/CM16/S16/HB2032/SC12-20K/GVS/SGZP-K1/KGSS/GTS-211B/GTS211A Gear Speed ​​Sensor
DZC-02/DZC-02A/37506A/HZQS-02A/HZQW-03A/HZC-12/HZQS-03A speed instrument
DM504/HY-ZS3/SZC-04F1/WZ-7A/IC-3A positive and negative speed detection monitoring and protection instrument
HY-ZS3F/RTB-S/CS-3F forward and reverse speed sensor DSE 1010.00 ZTZ/DSE 1010.00 STZ/DSE 1210.20 P13HZ 2835870
DSE 1210.20 P4HZ 2838155/DSE 1010.19 SHZ/DSE 1010.20 SHZ/DSE 1010.07 P3HZ/DSE 1010.21 KHZ/DSE 1010 SHV (2m)/DSE 1010.00 STV (3m)/DSE 0603.00 SHZ (0,2m)
SZC-04/SZC-04B/SZC-04BG/SZC-04F/85700/85790/JMS/HY-01/XSM/DF9011/WB--8381GE/SCM-II intelligent speed meter monitoring and protection instrument meter portable speed sensor calibration station
XJP-10B/02A/42A/XSV-01/SQY01T/MFT/SQY11-04/RAS/SKY/SZC/SQYC/CS-1/SQY01/QYDPM/SQY08TD intelligent speed digital display instrument

00C rotating machinery monitoring and protection device 8002C management and power module 8012C vibration monitor 8022C axis vibration monitor 8032C displacement monitor 8051C speed / impact sub-monitor 8052C speed monitor 8054C zero speed monitor 8056C anti-rotation speed monitor 8062C eccentric monitor 8072C Travel monitor 8102C temperature (thermocouple) monitor 8106C temperature (thermal resistance) monitor 8142C universal monitor 8150C dual-channel key phaser 8163C three take two overspeed protector HZS-C4C smart tachometer
8000B series monitoring and protection device system 8000B-000 instrument instrumentation chassis 8000B-001 instrument instrumentation power supply 8000B-012 dual channel bearing vibration function module 8000B-022 dual channel axis vibration function module 8000B-032 dual channel axial displacement function module 8000B- 042 dual channel expansion function module 8000B-051 single channel speed / zero speed / emergency interrupt function module 8000B-061 single channel eccentric function module 8000B-072 dual channel thermal expansion function module 8000B-082 dual channel valve position function module 8000B-092 Dual channel fuel tank oil level function module 8000B-102, 106 dual channel temperature function module 8000B-142 dual channel universal display function module 8000B-150 key phase function module 8000B-162 dual channel three take two function module 8000B speed monitoring protection device palm Computer configuration software configuration software acquisition software

S3/hy-cs1/od9001/s2183/s2181/Intelligent tachometer vb-z410/vb-z440/vb-z470/vrs2000a7/xhf-201/wb-8581 intelligent speedometer df9032 thermal expansion monitor sw-2/td-2 Displacement monitor 3500/3300/7200/pt2060/pt2010/rms700/mms3000/mms6000/vb4000/tn8000/win2000/vm600/en8000/en9000/mv2000/mv3000/s8100/8500/9000/zxp-jk6600/s32000/s36000/ 8000b series rotating machinery monitoring and protection device slmcd-21t/winyv/zd8133/od9200t/mls/v-9/fzb/ymlv/jx73/jx73st/bj230 integrated vibration transmission tr2001/tr2011/tr2031/tr2061/tr2081/trzf/tr95 Transmitter dtm/tm101/tm201/tm202/tm301/tm302/tm501/tm502/transmitter slm/winv/en2000a4/en2000a5/en2000a6/transmitter zxp-t100/zxp-t110/zxp-t120/wz-5a/ Wz-5b/zd24-zf-1/zd24-zf-2 transmitter od9200-b/s9210/s9220/s9260/s9860/02/s9820/02/s9881/01/jx5151/jx5121 transmitter vb-z330/ Vb-z310/vb-z320/mms3110/mms3120/mms3210/mms3311/mms3410/vrs20/mlv/d transmitter vib-15a/hr-2000/tr4101/sj6011/sj6021/sj6031 transmitter tm0540/3300xl/win- 400/hy-xy1/od-9003(a/b)/s21310/vrs4000/xq-15/dz-30 eddy current probe static calibrator
HZS-04F intelligent anti-tachometer, HZS-04T wall-mounted intelligent tachometer, HZS-04 intelligent tachometer, HZS-04M electronic module tachometer, HZS-04C intelligent tachometer, HZD-Z/W Type wall-mounted intelligent vibration temperature monitor HZD-W/L type intelligent vibration monitor, HZD-W/L type four-channel vibration monitor, HZD-Z type intelligent axis vibration monitor, HZD-W type intelligent vibration monitor , HZD-L type intelligent vibration intensity monitor, HXW-U type intelligent fuel tank oil level monitor, HXW-Y type intelligent oil motivation monitor, HXW-R type intelligent thermal expansion monitor

8500LD dual channel intensity monitor, 8500ZD dual channel vibration monitor SW-2 displacement monitor, RDPX eccentric monitor, 85200-W displacement monitor

MLI3000 vibration monitor, MLI-2001 speed detector, MLI-2010 water swing monitor, MLI-2009 eccentric monitor, MLI-2007 speed monitor, MLI-2005 differential monitor, MLI-2004 bearing vibration intensity Monitor
SZ-5/SZ-6/SZ-6B/TRLV/TM0793V/TM079VD/9200/74712/47633 Magnetoelectric Vibration Speed ​​Sensor
CD-1/CD-2/CD-4/CD-4A/CD-6/CD-6A/CD-7-C/CD-7-S/CD-8/Watt Cap Vibration Sensor
CD-21-2-C/CD-21-2-S/CD-21-T/CD-21C/S/BCD-21A/CD721/WIND vibration speed sensor
MLS-9/MLV-6/MLV-7/MLV-8/MLV-9200/MLV-9268/MLV-27/MT1/MT2T/MT3T/MT3M/Vibration Sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/ Bush vibration sensor
MLV-9200 (16699/900) / 9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed sensor
5300-DW/axial displacement monitoring and protection device
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/ VRS2000A2/Axial Displacement Detection Monitor
RDZW-2Na/CZQX/RDCZ/RDCZ-2/85710/
HY-02/DEM/DDEM/ S2161A/
VRS2000A5/Expansion monitoring and protection device SD-051/IN-081/IN-083/IN-084/IN-085/INA-081/INA-083/INA-085/DS-1051/DS-1052/DS-1053 /DS-1054/SD-052/SD-053/SD-054/SD-081/SD-083/SD-084/SD-087/SD-088/SD-089/SDH-151/SDH-154/SD -161/
SD-164/WT-010/WT-025电涡流轴位移传感器轴振动探头JM-C-3转速监测保护仪 182/WINW/QH8500/SE/CWY-DO/轴向位移传感器
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/
WD220非接触位移传感器

RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/8
2二线制振动变送器
2二线制振动烈度变送器
2二线制轴振动变送器
BSQ001电源变换器BSQ011a/BSQ011b/BSQ011c/BSQ011d/cu-02振动变送器BSQ015a/BSQ015b/BSQ015c/BSQ015d振动烈度变送器
BSQ021/BSQ021a/BSQ021b/BSQ021c/BSQ021d/BSQ021e轴振动变送器
BSQ031/BSQ031a/BSQ031b/BSQ031c/BSQ031d/BSQ031e轴向位移变送器
BSQ051a/BSQ051b/BSQ051c/BSQ051d转速变送器
BSQ073a/BSQ073b/BSQ073c/BSQ073d行程变送器
WZ-5A/WZ-5B转速信号变送器HZS-C4C型智能转速表
ZHS-9/ZHV-9/SLMCD-21T/WINYV/ZD8133/OD9200T/MLS/V-9/FZB/YMLV/JX73/JX73ST/BJ230/YZHS/YZHV/YZH-B/WB-8111B一体式振动传感器变送器
TR2001/TR2011/TR2031/TR2061/TR2081/TRZF/TR95/SZBS-1变送器
DTM/TM101/TM201/TM202/TM301/TM302/TM501/TM502/变送器
990振动变送器/991轴向位移变送器
SLM/SLM-1000/SLM-2000/SLM-3000/SLM-4000/SLM-5000/SLM-6000/SLM-7000/SLM-8000/WINV/EN2000A4/EN2000A5/EN2000A6/变送器HZS-04智能转速监测仪 配套转速探头
ZXP-T100/ZXP-T110/ZXP-T120/WZ-5A/WZ-5B/ZD24-ZF-1/ZD24-ZF-2变送器
OD9200-B/S9210/S9220/S9260/S9860/02/S9820/02/S9881/01/JX5151/JX5121变送器
VB-Z330/VB-Z310/VB-Z320/MMS3110/MMS3120/MMS3210/MMS3311/MMS3410/VRS20/变送器
MLV/DVIB-15a/HR-2000/TR4101/SJ6011/SJ6021/SJ6031/VB-Z410、VB-Z420、VB-Z430、VB-Z440、VB-Z440B、VB-Z310、VB-Z320、VB-Z330、VB-Z210、VB-Z220、VB-Z230、VB-Z9100、VB-Z9200、VB-Z9300、VB-Z9500、VB-Z9530、VB-Z9800、VB-Z470、VB-Z470B、VB-Z2100、VB-Z2200、VB-Z2300、VB-Z2400、VB-Z2500、VB-Z2600、VB-Z2700、VB-Z2800、VB-Z2900、VB-Z6100、VB-Z9210、VB-Z9220、VB-Z9260、VB-Z2184、VB-Z8200、VB-Z2188、VB-Z2101、VB-Z2102、VB-12161变送器
TK3-2/TM0520-K/-9292/JX-3B/S21330/S21320/OD9002/V503/V505/CIJ-J30/CIJ-J20/HV-520/VB-Z8901/DX-02/VRS5000/SE-11/SE-41/PJD/VRS2000振动校验台电涡流探头校准仪仪表
TM0540/3300XL/WIN-400/HY-XY1/OD—9003(A/B)/S21310/VRS4000/XQ-15/DZ-30电涡流探头静态校验仪仪表
BSQ001/TM900/TM900-A00电源变换器

80器

MMS3210双通道轴位移变送器MMS3311双通道转速键相变送器MMS3410双通道

8000系列监视保护装置8000-01仪仪表仪表机箱8000-001仪仪表仪表电源8000-011(012)轴瓦振动监视保护仪仪表8000-022轴振动监视保护仪仪表8000-031(032)轴向位移监视保护仪仪表8000-041(042)胀差监视保护仪仪表8000-051转速零转速监视保护仪仪表8000-061偏心监视保护仪仪表8000-071(072)汽缸膨胀监视保护仪仪表8000-081(082)阀位行程(油动机)监视保护仪仪表8000-091(092)油箱油位监视保护仪仪表8000-102温度监视保护仪仪表8000-142通用显示仪仪表(液位计)8000-150键相监视保护仪仪表8000超速保护装置
RDZW-2Na型单通道轴向位移监视仪仪表仪表RDZW-2N型轴向位移监视仪仪表RDCZ-2Na型智能胀差监视仪仪表RDCZ胀差监视仪仪表RDXZ/RDXZ-2系列轴振动监视仪仪表CZJ-B系列振动监视仪仪表CZJ-Q/CZJ-QL系列振动巡检仪仪表SZC-04型智能转速仪表SZC-04B型智能转速仪表SZC-04F型智能转速仪表SZC-04F1型智能反转速仪表DZC-02/02A型电子模拟转速仪表XJZC-03A转速-撞击子监视装置XJCS-03超速监视保护装置XJTM-02型显示报警仪仪表RDPX偏心监视仪仪表SW-2/TD-2型位移监视仪仪表LD-3000系列温度显示调节仪仪表CZ-6/6c型数显振动仪表
ZH2000系列可编程监视仪仪表系统简介ZH2012双通道可编程振动监视仪仪表ZH2022双通道可编程轴振动监视仪仪表ZH2032可编程轴向位移监视仪仪表ZH2042可编程胀差监视仪仪表ZH2051可编程转速撞击子监视仪仪表ZH2052可编程转速监视仪仪表ZH2054可编程零转速监视仪仪表ZH2056可编程反转速监视仪仪表ZH2062可编程偏心监视仪仪表ZH2072可编程位移监视仪仪表
BSQ系列变送器简介BSQ001电源变换器BSQ011系列振动变送器BSQ021系列轴振动变送器BSQ031系列轴向位移变送器BSQ051系列转速变送器BSQ073系列行程变送器BS系列安装盒
YZHS/YZHV/YZH-S/YZH-V系列一体化振动位变送器YZH-B一体化振动变送器YZH-K型系列电子振动开关ZDT-2便携式振动校验台ZST-1转速校验台8400系列静态校验仪仪表ZY-350动态校验仪仪表HZS-C4C型智能转速表
DWQZ系列电涡流传感器SZ-4型磁电式速度传感器SZ-6(C)型磁电式速度传感器SZ-6B型磁电式速度传感器SZ-6i型防爆磁电式速度传感器ZHS-9/ZHV-9一体化超低频振动位移传感器SMCB-01/02磁敏式测速传感器SZCB系列磁阻式转速传感器TD系列LVDT传感器UT-81系列LVDT传感器B49(UHZ)系列磁翻柱液位传感器SZCB-01i型防爆磁阻式转速传感器SZ-6i型防爆磁电式速度传感器TD-1i型LVDT传感器

MTN/1185IC/VP-201/202瓦震振动速度传感器S-YTH振动测量装置 TM016-001-530-00-0/TM016地震式速度加速度振动传感器变送器
VS-068/VS-069/VS-077/VS-079/VS-080/VS-168/VS-169/VS-177/VS-277/VS-288/VS-289/瓦震振动速度传感器
PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70电动式绝对振动瓦震传感器
PR6418相对位移传感器PR9350电感式位移传感器PR9376转速传感器PR9270加速度传感器
TM0782A-K/TM0783A/TM0793V-K/TM079VD瓦震振动传感器PT079VD 低频磁电式速度位移传感器
SD-051/IN-081/IN-083/IN-084/IN-085/INA-081/INA-083/INA-085/DS-1051/DS-1052/DS-1053/DS-1054/SD-052/SD-053/SD-054/SD-081/SD-083/SD-084/SD-087/SD-088/SD-089/SDH-151/SDH-154/SD-161/ SD-164/WT-010/WT-025电涡流轴位移传感器轴振动探头
OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165电涡流轴位移传感器轴振动探头前置器
EC-001/EC-002/EC-003电涡流轴位移传感器轴振动探头延伸缆
PR6422/PR6423/PR6424/PR6425/PR6426电涡流轴位移传感器轴振动探头CON011/91、CON021/91、CON031/91电涡流轴位移传感器轴振动探头前置器
TM0105/TM0180/TM0110/TM0120/TM0393电涡流轴位移传感器轴振动探头TM0182电涡流轴位移传感器轴振动探头前置器TM0181电涡流轴位移传感器轴振动探头延长电缆
MMS6110双通道轴振测量模块MMS6120双通道瓦振测量模块MMS6210双通道轴位移测量模块MMS6220双通道轴偏心测量模块MMS6312双通道转速键相模块MMS6410双通道缸胀测量模块MMS6418绝对相对胀差测量模块MMS6831RS485通讯单元MMS6823RS485转换模块DOPS三取二转速测量系统智能转速表,SZC-01,SZC-02,SZC-03,SZC-04
PT2010/11双通道机壳振动(加速度/速度/位移)监测仪表PT2010/21双通道振动监测仪表PT2010/22双通道轴向位置监测仪表PT2010/25双通道摆度/偏心监测仪表PT2010/26双通道胀差监测仪表PT2010/51双通道转速监测仪表PT2010/51D 双通道转速监测仪表PT2010/53 三冗余超速保护仪表PT2010/62双通道机壳膨胀监测仪表
MMS3110双通道轴振变送器MMS3120双通道瓦振变送器MMS 3125双通道轴承振变送


AI-TEK(AIRPAX)/Tach-pak1/Tach-pak2/Tach-pak3/Tachtrol1/Tachtrol2/Tachtrol3/MV-智能转速表,SZC-01,SZC-02,SZC-03,SZC-04VI/TACHPAK1/TACHPAK1/TACHPAK2/TACHPAK3智能转速监测仪仪表
WZ-3C/WZ-1D/WZ-6A/AI-TEK(AIRPAX)/EN2000A3/TB-410智能转速测量仪仪表仪表
WZ-3C-A/WZ-3C-B/WZ-3C-C/WZ-3C-D智能瞬态转速仪仪表仪表

C-A/WZ-3C-B/WZ-3C-C/WZ-3C-D智能瞬态转速仪仪表仪表


WZ-1D-A /WZ-1D-B/WZ-1D-C危急遮断转速仪仪表仪表
WZ-6A-A/WZ-6A-B/WZ-6A-C/DF9011/DF9012智能瞬态转速仪仪表仪表
PRA11011/PRA11012/PRA11021/PRA11022/PRA11031/PRA11032/PRA13011/PRA13012/PRA13智能转速表,SZC-01,SZC-02,SZC-03,SZC-04

Building Waterproof Material RDP

Flexible Crack Resistant VAE (Vinyl Acetate-Ethylene) is a type of copolymer emulsion used in the formulation of flexible coatings and adhesives. It is specifically designed to provide excellent flexibility and crack resistance in various applications.

The crack resistance of VAE is achieved by the incorporation of ethylene monomer units into the vinyl acetate polymer chain. The presence of ethylene units enhances the polymer's ability to withstand stress and deformation, preventing the formation of cracks even under dynamic conditions.

Flexible crack resistant VAE is commonly used in the production of flexible coatings for applications such as waterproofing membranes, roof coatings, and sealants. It offers excellent adhesion to various substrates, including concrete, metal, and wood. The flexibility of the VAE emulsion allows it to accommodate substrate movement and prevent crack formation.

In addition to coatings, flexible crack resistant VAE is also used in the formulation of flexible adhesives. It provides strong bonding properties while maintaining flexibility, making it suitable for applications where joint movement is expected, such as in construction and automotive industries.

Overall, flexible crack resistant VAE is a versatile material that offers excellent flexibility and crack resistance. Its properties make it an ideal choice for various coating and adhesive applications where durability and long-term performance are required.

Building Waterproof Material Rdp,Tile Adhesive Rdp,Building Waterproof Vae Powder,Redispersible Polymer Powder

Jinzhou City Tujin Building Materials Co.,Ltd. , https://www.hpmctujin.com