Vr 8500 Long Range King Diamond Gold Metal Detector
The Pillar Jib Crane has been designed for freestanding installation on the building floor. This workstation crane provides a slew range of 270° with jib arm lengths of up to 7 m and Safe Working Loads (SWL) of up to 1.0 t. Slewing stops allow you to adapt the slewing range to your individual needs.
The pillar Jib Crane is typically used to support lifting tasks that are mostly in the lower capacity range. Loads can be quickly and safely raised and can be transferred effortlessly and precisely thanks to the smooth-running jib arm.
The crane is mounted by means of a round dowel plate with special floor dowels conforming to the permissible dynamic loads. It is also possible to use anchor rods to fix the cranes to foundations or to use intermediate plates with ground anchors.
Pillar Jib Crane Pillar Jib Crane,Pillar Crane,Small Pillar Jib Crane,Pillar Mounted Floor Crane Shandong Lite Electrical Co.,Ltd , http://www.chinacranegroup.comIntroduction of Vr 8500 Long Range King Diamond Gold Metal Detector
Vr 8500 Long Range King Diamond Gold Metal Detector is our new upgraded version for Detect Copper, Gold, Silver, Tin,Lead, Diamond, and Precious Stone with 100-1000m, Depth: 5-50m  detecting range. VR Metal Detector System: The VR Ultrasonic Long Range King is an advanced Metal Detector System utilizing advanced FORWARD GAUSS technology that is both an audio and visual detector.
This metal detector was first used in the field in 1984 and the FORWARD GAUSS technology that it uses has proven to be (by far) the most successful.
This system was originally developed for professional archeologists and treasure hunters and has been used both on land and under water. With the development of faster and more complex processing units and a reduction in the cost of materials, we were able to begin offering this breakthrough technology to the general public at a much more affordable cost. Part of the success of this metal detector system is that it does not look like a standard metal detector. Instead, it has the appearance of a fine, well manufactured piece of scientific equipment that one might expect to find at an archeological site.
Vr 8500 Long Range King Diamond Gold Metal Detector is custom built in a sturdy, hard side, padded case with two locks. The transmitter is case mounted and includes the Standard Six elements with selector switch. The system includes an installed, rechargeable gel cell battery with charger, transmitting antenna, receiving rods and receiver with belt clip, headphones and user manual all inserted into the specially fitted case.Features and Functions of Vr 8500 Long Range King Diamond Gold Metal Detector
(1) We add a function of indicator lights on VR 8500 Long Range King Diamond Metal Detector. These indicator lights show 20 different distances between the user with a receiver and the transmitter.
(2) Most common frequencies are for detecting Detect Copper,Gold, Silver, Tin,Lead, Diamond
(3) Detecting Range: 100-1000m
(4) Detecting Depth: 5-50m
(5) After tracking target, you will have some idea of the identification and the exact pinpoint.
(6) The face (front) of the transmitter has six LEDs (channel indicator lights) across the top; each is labeled for a particular element.Components of Vr 8500 Long Range King Diamond Gold Metal Detector
(1) A grey case with aluminum trim, a handle and two locks
(2) External Battery Port
(3) The Belt Receiver
(4) Head Phones
(5) Receiving Rods
(6) Battery Charger, AC/DC adapter, input AC 115V, output DC 9V
(7) Antenna
(8) Marker Flags
(9) Operators Manual
Specifications of Vr 8500 Long Range King Diamond Gold Metal Detector
(1) Max Detection: 5-50m
(2) Detect Range: 100-1000m
(3) Rechargeable Battery: Continuous working 48 hours
(4) Power: 850mA
(5) Frequency: 433Mhz+/-150Khz
(6) Inner Storage: EEPROM 16k*8Bit
(7) Voltage: 9~12VDC
(8) Temperature Range: -40~85
(9) Operating Humidity: 0~95% (non-condensing)
(10) Ultrasonic Frequency: 400-3000Mhz+/-150Khz
(11) Weight: 14LBS
Package of VR 8500 Long Range King Diamond Metal Detector
(1) Size/Unit: 35*31.5*16cm
(2) Weight/Unit: 7kg
(3) Qty./CTN: 1unit
(4) Size/CTN: 38.5*37*18cm
(5) G.W./CTN: 9kg
Pictures of VR 8500 Long Range King Diamond Metal Detector
Introduction of Vr 8500 Long Range King Diamond Gold Metal Detector
Vr 8500 Long Range King Diamond Gold Metal Detector is our new upgraded version for Detect Copper, Gold, Silver, Tin,Lead, Diamond, and Precious Stone with 100-1000m, Depth: 5-50m  detecting range. VR Metal Detector System: The VR Ultrasonic Long Range King is an advanced Metal Detector System utilizing advanced FORWARD GAUSS technology that is both an audio and visual detector.
This metal detector was first used in the field in 1984 and the FORWARD GAUSS technology that it uses has proven to be (by far) the most successful.
This system was originally developed for professional archeologists and treasure hunters and has been used both on land and under water. With the development of faster and more complex processing units and a reduction in the cost of materials, we were able to begin offering this breakthrough technology to the general public at a much more affordable cost. Part of the success of this metal detector system is that it does not look like a standard metal detector. Instead, it has the appearance of a fine, well manufactured piece of scientific equipment that one might expect to find at an archeological site.
Vr 8500 Long Range King Diamond Gold Metal Detector is custom built in a sturdy, hard side, padded case with two locks. The transmitter is case mounted and includes the Standard Six elements with selector switch. The system includes an installed, rechargeable gel cell battery with charger, transmitting antenna, receiving rods and receiver with belt clip, headphones and user manual all inserted into the specially fitted case.Features and Functions of Vr 8500 Long Range King Diamond Gold Metal Detector
(1) We add a function of indicator lights on VR 8500 Long Range King Diamond Metal Detector. These indicator lights show 20 different distances between the user with a receiver and the transmitter.
(2) Most common frequencies are for detecting Detect Copper,Gold, Silver, Tin,Lead, Diamond
(3) Detecting Range: 100-1000m
(4) Detecting Depth: 5-50m
(5) After tracking target, you will have some idea of the identification and the exact pinpoint.
(6) The face (front) of the transmitter has six LEDs (channel indicator lights) across the top; each is labeled for a particular element.Components of Vr 8500 Long Range King Diamond Gold Metal Detector
(1) A grey case with aluminum trim, a handle and two locks
(2) External Battery Port
(3) The Belt Receiver
(4) Head Phones
(5) Receiving Rods
(6) Battery Charger, AC/DC adapter, input AC 115V, output DC 9V
(7) Antenna
(8) Marker Flags
(9) Operators Manual
Specifications of Vr 8500 Long Range King Diamond Gold Metal Detector
(1) Max Detection: 5-50m
(2) Detect Range: 100-1000m
(3) Rechargeable Battery: Continuous working 48 hours
(4) Power: 850mA
(5) Frequency: 433Mhz+/-150Khz
(6) Inner Storage: EEPROM 16k*8Bit
(7) Voltage: 9~12VDC
(8) Temperature Range: -40~85
(9) Operating Humidity: 0~95% (non-condensing)
(10) Ultrasonic Frequency: 400-3000Mhz+/-150Khz
(11) Weight: 14LBS
Package of VR 8500 Long Range King Diamond Metal Detector
(1) Size/Unit: 35*31.5*16cm
(2) Weight/Unit: 7kg
(3) Qty./CTN: 1unit
(4) Size/CTN: 38.5*37*18cm
(5) G.W./CTN: 9kg
Pictures of VR 8500 Long Range King Diamond Metal Detector