W Type Rubber Fender is designed for using in extreme conditions and to absorb excessive bumps and shocks. It is generally fastened to the stern and bow of tugboats, workboats and icebreakers. The W-shaped profile with grooves on the top of fenders for extra grip and low pressure while pushing. Its special structure makes the fender much easier installation with a large or small radius by means of guide rods. Features:
High energy absorption and low reaction force;
Reasonable structure and good durability;
Easy to install and replace;
Withstand the most severe service by means of tough wear resistant synthetic rubber;
Wide flexibility in design to meet customers'Â requirement.
PRODUCT INTRODUCTION Specifications:
Type
Dimensions(mm)
W
H
A
B
C
W320
320
200
100
180
280
W400
400
250
110
220
350
W480
480
300
135
265
420
W500
500
360
125
265
390
W500
500
450
90
250
420
Note: other size can be made as per customers'Â request.
2.Product description:
W type rubber fender: (1).high energy absorption. (2).low reaction force. (3).With rational structure. (4)easy for installation
W type rubber fender:
High quality marine boat M type rubber fender: The M type fender is typically mounted to a dock or a ship to counteract the collision force between the dock and the ship generated during mooring and berthing,thus preventing ships and docks from being damaged. Feature: (1).high energy absorption (2).low reaction force. (3).With rational structure,easy for installation and maintenance.
The polyester non-woven fabric production line is made of PET (polyethylene terephthalate) chip raw material, using chip spinning process route, air drafting device and rotary swing plate technology to produce filament needle punched non-woven fabric. The design adopts advanced technology, uses the collected data, digests and absorbs to design a filament needle punched non-woven fabric workshop. Non-woven fabrics with a width of 6.8 meters, with an annual output of 5,500 tons, using spunbond needle punching production lines.
Non-woven equipment, polyester spunbond non-woven equipment, polyester non-woven production line, polyester (PET) thermobonded non-woven production machinery,Polyester (PET) hot-rolled non-woven fabric production machinery