Xingshun An teach you how to install wing gate access control system
Peeled or turned steel bar is produced by peeling or turning from hot rolled steel bar. Our advantages and more services of Cold Drawn Steel Round Bar includes:
1) Wide range of diameters from 20mm to 150mm
2) Customized Length from 100mm to 12000mm
3) Good surface roughness: 0.4um to 1.6um
4) Good straightness: 0.5mm/m to 2mm/m
5) Good roundness: 80% of diameter tolerance
6) Diameter tolerance: -0.02mm to -0.1mm / h9, h10, h11
7) Matched further processing: Grinding, polishing, straightening
8) Anti-rusty package
9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing
10) Fast delivery time
Bright Bar,Turned Steel Bar,Peeled Steel Bar,Peeled Or Turned Steel Bar SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdthreadedrods.com
(1) Preventing the attenuation of the transmission signal of the wing gate
Wing gate and access controller installation to take into account the distance between the controller and the reader, the ideal transmission distance is within 100m. For signal transmission cables, cable shielding and signal attenuation due to long-distance transmission must be taken into consideration. During the construction of the pipeline, the line pipe and cable tray made of steel should be used, and reliable grounding should be performed.
(2) The electromagnetic interference shielding wing gate <br> <br> reader for wing gates, door opening button special attention to electromagnetic interference, in particular interference light switches, electric typewriters and computers and the like. If conditions permit, the reader should be installed at a distance of more than 30cm from the power source.
(3) debug system debug access control system software is the key to ensure the quality of the forbidden wing gate system. The emphasis is on the commissioning of the access controller and the operation of the system software. The commissioning of these two parts must be carried out by the manufacturer at the same time. The function of the wing gate controller is that in addition to the reader input, it is also necessary to set the relay linkage output function according to needs, the time and location of the alarm generation and start-up such as cameras, alarm horns, etc.