AQSIQ: Some Isuzu Automobiles will stop importing today
Main feature of anchor mining drilling machine:
7,The mining drilling machine can meet three-wing drill drilling, DTH hammer drilling, casing drilling, drill pipe / casing complex drilling, single / double/ triple rotary spray, fixed spray, swing spray and so on .
Top Drive Drilling Rig,Top Drive Drilling,Top Drive Rig,Top Drive In Drilling Rig JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrilling.com
The front and rear axle wheels were locked prematurely and severely derailed. AQSIQ issued an emergency announcement. The relevant personnel of the AQSIQ revealed yesterday that the AQSIQ has urgently notified the local inspection and quarantine authorities to suspend the processing of Isuzu CXZ81K/Q and CXZ51K. /L/Q Auto's customs clearance and related inspection and quarantine procedures will stop its entry from today. Recently, AQSIQ organized experts to conduct technical verification tests on Japanese Isuzu C series brake systems, and discovered that the brake systems of this series had hidden safety and quality problems. According to the national standard of the People's Republic of China, the structure, performance and test of the automobile brake system The corresponding standard of the method (GB12676-1999) is that the result of the “Type 0 Test†of the vehicle's service braking system is in a critical state; the phenomenon of premature locking, serious printing and deviation in the middle and rear axle wheels occurred in the test. Does not meet the "test method" requirements. The person concerned said that after the Isuzu CXZ81K is in use on the brakes, the braking performance of the Isuzu CXZ81K is still inconsistent with the relevant provisions of China’s “Safety Requirements for Motor Vehicle Operation†(GB7258-2004). The improvement measures implemented by Isuzu Automobile Co., Ltd. on the Isuzu CXZ81K/Q and CXZ51K/L/Q vehicles cannot fundamentally solve the safety and quality problems such as the low level of braking efficiency and the unstoppable braking performance. The quality inspection department also suggests that the user should perform a brake safety inspection as soon as possible. If it is not qualified, stop using it immediately to avoid safety accidents. (Zhu Dongsong)
1, The anchor drill rig with full hydraulic control, Operation is convenient and flexible, easy shifting, good maneuverability, saving time and labor.
2, Drill rotary machine driven by a double hydraulic motor, High output torque, rotary center lower than similar products, greatly improving the rig drilling rig stability.
3, New variable angle mechanism to make the hole more convenient, adjustment range is larger, can reduce the requirements of the working surface.
4, For the customer's local special conditions, the cooling system is optimized to ensure that the hydraulic system when the outdoor temperature is 45 ° C, the maximum temperature does not exceed 70 ° C.
5, Match dedicated simultaneous casing drill tools (drill pipe, casing, eccentric bit, etc.), in the unstable formation with casing wall openings, the conventional button bit use for end-hole . High drilling efficiency , and good quality.
6, Machine is mainly suitable for deep foundation pit anchor support, but also through the rotary spray module replacement, so machine can be rotary jet spray construction.