Automatic door operation steps
Galvanized razor wire,Razor wire for fencing,Wholesale razor barbed wire,Coil razor wire,Anti-climb razor wire Anping Honglin Wire Mesh Co.,Ltd , https://www.honglingwirenetting.com
2. The timer can automatically control the state of the door. The principle is to connect the clock to a specific switch circuit, and the automatic door can be automatically opened or locked in a preset time.
3. The lock motor is used for heavy-duty automatic sliding doors. The electronic locks of automatic swing doors are electromagnetic door stoppers, electronic latch locks and electronic door openers. The direction of the force of the electronic door opening does not affect the opening movement of the door and is not prone to misoperation. There is also a mechanical lock with a contact switch, so that the lock is combined with the switch, the lock is not in the unlocked state, the contact cannot be contacted, and misoperation may not occur.
4. Inductive signal generators can be used to signal when the sensor detects that the door is in a certain position. When the corresponding indicator is set in the central control room, the state of the automatic door can be displayed, and the centralized operation usually means that multiple doors are opened or locked at the same time, depending on whether there is a corresponding terminal on the automatic door controller.