When the CNC machine fails, the current is detected by a tool such as an ammeter voltmeter.
Instrument measurement method Instrument measurement method refers to the detection of the machine tool by means of voltmeter, ammeter, oscilloscope, programmer, etc. when the CNC machine tool fails, and analyzes the position of the fault. When the CNC machine tool fails, you can first check whether the current, voltage, pulse, etc. are normal through tools such as ammeter voltmeter: If the position change fails, you can use the oscilloscope to detect the signal status of the measurement circuit, or detect whether there is a zero mark pulse, etc.: The programmable controller has failed. You can use the programmer to call up the interrupt stack and the block stack and find the fault according to its instructions. Spare Parts Replacement The function of modern CNC machine tools is getting stronger and stronger, and the effect is getting better and better, but the result is that the scale of circuit integration is getting bigger and bigger and more complicated. When the CNC machine fails, it is difficult to discharge the fault in a short time, and even it is difficult to locate the fault in a small area. In this case, if you want to reduce the downtime, replacing the faulty module with the diagnostic spare part will be the most A way to be effective. If the spare parts are not diagnosed, they can be replaced with the same or compatible modules to make the system work properly. The self-diagnosis function method has a strong self-diagnosis function in the control system of the CNC machine tool, which monitors the working state of the machine tool at any time. Once the CNC machine fails, the self-diagnostic system issues an alarm and indicates through the display what the cause of the failure may be. The self-diagnosis function of CNC machine tools is divided into hardware and software. If the hardware fails, it will not be able to alarm. Some CNC machine tools can make corresponding indications through different flashing frequencies or different combinations of LEDs to help find faults. The position of the board. (Finish) Black Wire
Black Drawn Wire,Nail Wire,Black Hard Wire,Black Uncoated Wire,Black Annealed Wire
Wire Materials: Iron Wire or carbon steel wire.
ANPING SANXING WIRE MESH FACTORY was Founded in 1990, which lies in the wire mesh's home, Hebei Anping county.
Black Drawn Wire,Nail Wire,Black Hard Wire,Black Uncoated Wire Anping Sanxing Wire Mesh Factory , https://www.anpingsanxingwiremesh.com
Soft annealed wire offers excellent flexibility and softness through the process of oxygen free annealing.
Uses: Black annealed wire is mainly processed into coil wire, spool wire or big package wire. Or further straightened and cut into cut wire and U type wire. Annealed wire is used as tie wire or baling wire in building, parks and daily binding.
Packing: Spools, coils.
Wire Diameters: Similar to galvanized iron wire, from 5mm to 0.15mm (wire gauge 6# to 38#).
As a manufacturer of wire-drawing, mesh-weaving, wire mesh products further process , and a wire mesh exporter,we have won good reputation in the world.
The main wire mesh products : Welded Wire Mesh , Stainless Steel Wire Mesh, Square Wire Mesh, Galvanized Wire mesh, Window Screen , Crimped Wire Mesh, CHAIN LINK FENCE . Hexagonal Wire Mesh, expanded metal mesh, conveyor belt mesh, etc.
The main Wire Products : galvanized iron wire, bright annealed wire, stainless steel wire, cut iron wire, Barbed Wire , etc.
ANPING SANXING WIRE MESH FACTORY has set up a high-technology and modern management system, especially worthy to be contacted and creditable .We will be pleased to establish business relations with more friends from all over the world in the near future.
