BCH Explosion-Proof Punch Box Specifications and Outlet Size

BCH Explosion Proof Conduit Sizes and Outlet Sizes Explosion Proof Conduit Boxes are primarily intended for use in Zone 2 hazardous areas in explosive gas environments and are used in connection with steel pipe wiring.

1. Suitable for IIA, IIB, IIC explosive gas environment;

2. Suitable for flammable dust environment 20 zone, 21 zone, 22 zone 3. For the temperature group T1 - T6 environment;

4. Applicable to explosive hazardous environments such as oil extraction, storage, chemical, pharmaceutical, military and military facilities.

Explosion-proof box features:

1. Aluminum alloy shell surface high pressure electrostatic spray, cast steel products galvanized surface treatment;

2. Combination of various types to meet the various wiring needs at the scene;

3. Stainless steel exposed fasteners.

Explosion-Proof Punch Box Technical Parameter Execution Standard: GB3836.1, GB3836.3, IEC60079

Rated mark: ExeII

Protection class: IP55

Anti-corrosion level: WF1

Explosion-proof box type:

A: Through Explosion-proof PULL BOX B: Three-way explosion-proof PULL BOX C: Four-way explosion-proof PULL BOX D: Left-bend explosion-proof PULL BOX E: Right-bend explosion-proof PULL-BOX F: Rear lid Bent through explosion-proof PULL BOX G: Rear cover Threading box H: Ingot explosion-proof box

Explosion-proof packing box product advantages:

1. This product is an increased safety structure;

2. The shell is made of cast aluminum alloy and adopts advanced high-temperature one-time die-casting molding process. The surface is smooth and the appearance is exquisite and beautiful. The metal structure has high density, no bubbles inside, no blisters inside, good impact resistance (up to 7J), good explosion-proof performance of the shell, and permanent explosion-proof marks directly suppress it;

3, the product shell first high-speed shot blasting, and then using high-pressure electrostatic spray process, plastic powder adhesion, with good anti-corrosion, anti-oxidation, anti-static, anti-light performance;

4. Rubber seal is adopted on the joint surface of the product body and cover, which has good sealing performance and strong waterproof performance;

5, a variety of structural forms, customers can choose according to need;

6. Please indicate the complete model, name and quantity when ordering.

Weld Materials

1.Welding materials

In Welding, substances called filler materials or consumables are used. As the name implies, these substances provide filler or a body of molten materials that provides a strong bond to be formed between the base metals used. Most welding processes will also require some form of shielding to protect both the main components and filler from being oxidized during the process.


The type of welding materials used during welding depends on the nature of the job intended. Electrodes draw the necessary energy in order to perform welding applications. Luoyang Golden Egret Company has any kind of welding materials include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod, Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.

Welding can be applied in different kinds of industries such as building and construction, oil and gas, marine, power generation, steel, mine tools, automobile, transportation and etc.


2. Welding rod

1)Cast tungsten carbide based tubular rod

The hard phase of the rod is cast tungsten carbide which leads to higher hardness and better wear-resistance.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65

Mainly used for Mining machinery, Geological tools, Petroleum drilling tools etc, by Oxy-Acetylene with weak carburizing flame.

Ni Based Welding Rod


Product recommendation:

GT1103 (CTC, 60-80 mesh),

GT1103-1(CTC, 20-30 um),

GT1103-2(CTC, 40-60 um)

2)The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test.

Mainly used for mining machinery. Geological tools etc; by Oxy-acetylene with weak carburizing flame.

Product recommendation:

GT2102 (Cemented carbide grit, 30-60mesh)

GT2102-2(Cemented carbide grit, 30-40mesh)

GT2102-3(Cemented carbide grit, 40-60mesh)

3)Tube rod is composited by Cemented carbide pellets, Spherical CTC and CTC. The layer has higher impact resistance, better wear resistance and good fluidity than other rods.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65.

Mainly used for oil method drill bits, such as Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT3302 (carbide pellets, 20-40mesh)

GT3302-1(carbide pellets, 14-40um)

4)The hard phase of the rod is monocrystal WC, the welding layer has a higher wear resistance and better impact resistance.

The wear resistance is 6-7 times better than others, tested by ASTM G65 method.

Mainly used for the repair and strength for oil drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT4104 (Monocrystal WC, 80-200mesh)

3. Welding Rope

Made form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The CTC is in spherical or irregular with good wear resistance; the nickel alloy is in spherical or nearly spherical shape with good wettability and erosion resistance and better corrosion resistance than tubular rod.

Recommend to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice, Coal drill pipe, Tunnel drilling machinery etc.

By Oxy-Acetylene Welding with weak carburizing flame.

5mm Welding Rope

Product recommendation:

GS110450N (CTC, 4mm, HRC 47-55)

GS110550N (CTC, 5mm, HRC 47-55)

GS110650N (CTC, 6mm, HRC 47-55)

4. Welding Bar

The rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is in irregular or spherical shape with better wear resistance and the nickel alloy is in spherical or nearly spherical shape and has good wettability with cast tungsten carbide. The cladding layer has a higher impact resistance and better wear resistance.

Its wear resistance and corrosion resistance is between tube rod and flexible rope.

Mainly used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner drill stem and Mechanical parts of Tunnel rock drill machine etc.

Welded by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GD4025253-3(CTC, SCTC, 4*600/6*600)

GD4030303-3(CTC, SCTC, 4*600/6*600)

5. Welding wire

Intensified molybdenum titanium vanadium composite chromium carbide welding wire can improve layer`s bonding strength and tenacity. This wire can use for multilayer welding which has no peel off, and it can maintain good wear resistance under certain impact working condition.

Product recommendation:GSQD671Mo-4(1.6mm)

Medium carbon and high chromium wear resistance welding wire has a higher hardness, stronger wear resistance, and excellent toughness by adding a certain amount of molybdenum alloys and boride. It has a better impact resistance and strip resistance than high chromium cast iron type materials

Product recommendation: GSQD621Mo-4(1.6mm)

6. Tungsten Carbide Pellets

With high sphericity & excellent alloy organization, cemented carbide pellet is mainly used in welding, as an adding material of PTA Powder , tubular welding rod, to improve the wear resistance of the workpieces greatly.

Product recommendation: GQ06


Wc 6co Tungsten Carbide Pellets


7. Tungsten Carbide Grits

Cemented carbide grit with different percent of cobalt has good abrasive resistance and is widely used for making grinding, polishing and cutting tools.

Product recommendation: GS08A


Wc 8co Tunsgten Carbide Grits




Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcmetalpowder.com