Chu Sheng compressed garbage truck performance introduction

1. The electromechanical-hydraulic integration technology with one-touch operation and the use of the microcomputer- controlled intelligent control program of the microcomputer can automatically complete the single-cycle or continuous-cycle garbage loading operation with a single button press. The operation is very convenient.

2,
The compression ratio is high, and the garbage compression ratio can be up to 1:2.5 . When the domestic garbage is compressed, the density can reach 0.5-0.8 t/m3 and the load is large.

3,
High loading efficiency, one cycle time for loading operation is less than 30 seconds , and one cycle time for unloading operation is less than 40 seconds.

4,
Two operating modes, electric button operation and handle operation, are set to facilitate debugging and maintenance. Both operation modes can work independently. When the electrical system fails, the operation can be continued with the handle to ensure the work efficiency.

5,
In the cab and the rear of the vehicle, operation buttons are set separately. When unloading garbage in the garbage dump, the operator does not need to get off the vehicle. The whole process of unloading the garbage can be completed in the cab, which is very convenient.

6,
Filler and car body joints adopt special-shaped sealing strips to be hydraulically locked so that garbage can be reliably sealed in the box body to prevent leakage of waste and sewage.

7,
In the hydraulic circuit of the lifting filler, there is a safety device that prevents bursting of the tubing and sudden drop of the filler to improve the safety of use.

8,
The emergency brake button is specially set on the car to stop the garbage packing device in any state or any position and to ensure the safety of the operator and the equipment.

9,
Imported parts are used for key control components to ensure that the garbage truck can operate stably and reliably.  

CPE 135A

Chlorinated polyethylene is a saturated polymer material with a white powder appearance. It is non-toxic and tasteless. It has excellent weather resistance, ozone resistance, chemical resistance and aging resistance. It has good oil resistance, flame retardancy and coloring properties. It is an excellent impact modifier for PVC plastics and a synthetic rubber with good comprehensive performance. It has a very wide range of applications and has been widely used in cables, wires, hoses, tapes, rubber and plastic products, sealing materials, flame retardant transport belt , Waterproof coiled material, film and various profiles and other products.

As a PVC impact modifier, CPE135A has many advantages such as low price, excellent performance, and excellent aging resistance, but it has certain disadvantages in the use of high impact and high hardness products and low temperature resistant products CPE135A. For example, in the formulation of rigid PVC, a large amount of CPE will reduce the hardness and rigidity, which reduces the physical properties of the product; in addition, when the low temperature resistance requirement of PVC products exceeds minus 30°C, CPE135A cannot meet the requirements. Under normal circumstances, modified CPE, such as ACM, RGC135A, etc., can be selected for rigidity and hardness improvement; for low-temperature resistance modification, impact-resistant ACR or other impact modifiers with lower glass transition temperature can be selected.

CPE 135A,Cpe-135a,Cpe 135a Impact Modifier,Impact Modifier

Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com