Cm55 Kmd Conical Twin Screw Barrel Double Screw Barrel PVC Pipe Extruder

September 27 11:04:01, 2022

  • Model NO.: Twin conical screw barrels
  • Plastic Processed: PVC
  • Automation: Automatic
  • Size: Customize
  • Nitrided Layer Depth: 0.5-0.8mm
  • Trademark: ZHONGYANG
  • Origin: China(Mainland) Zhejiang
  • Type: Pipe Extruder
  • Screw: Twin-Screw
  • Computerized: Computerized
  • Material: Nitriding Steel
  • Nitrided Hardness: HRC56-58
  • Specification: ISO9001: 2008 approved
  • HS Code: 84779000
Twin conical screw barrel,CM55 Kmd Series Conical screw barrel,  PVC pipoe/profile extruder screw barrel, Twin Screw and Barrel, double screw barrel, twin conical screws barrel
Specification:
45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188

The above are standard specifications, we can customize according to customers' requirements.

The compression ratio of screws can be designed according to different products and ingredients.

Base Materials:
1)38CrMoAlA(JIS SACM645)
2)42CrMo(AISI 4140)
3)4Cr5MoSi V1 (JIS SKD-61)
4)9Cr18MOV
5)HPT

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm

Experienced manufacturer, we will be the best choice.
Focus on quality and service.

Main Base materials 
  		 1.38CrMoAlA  (Nitriding Steel) 
2.  SKD-61   (Special Tool Steel) 
3.  42CrMo (Ultrahigh Strength   Steel) 
4. DC53 ( Cold Work   Die Steel)   
5. W6Mo5Cr4V2 ( High-Speed   Tool   Steel ) 
6. HPT 
  
  
  
Main Alloy Materials 		 1.  Ni-based alloy/Deloro alloy 
2.  Tungsten carbide/Wolfram carbide 
3.  NiCo-based alloy 
4.  Fe-based alloy 
5.  Co-based alloy   
  
  
  
  
Processing Technics 		 1.  Heat treatment 
2.  Quenching 
3.  Nitriding treatment 
4.  Bimetallic alloy welding 
5.  Bimetallic alloy centrifugal casting 
6.  Hard-chrome electroplating 
  
  
  
  
  
Technical parameters 		 Nitriding layer depth  0.5-0.8mm 
Nitrided hardness  HRC56-58 
Nitrided brittleness  Less than grade 1 
Surface roughness  Ra 0.4 
Linearity of screw  0.015mm 
Hard-chrome plating hardness  ≥HRC57 
Chrome-plating layer depth  0.03-0.09mm 
Bimetallic layer depth  3 mm 
Bimetallic layer hardness  HRC58-62 
Above are main technical information, a suitable screw and barrel will be made according to your requirement. 
 

FRP PU Foam Panel

FRP PU Foam Sandwich Panels are made of prefabricated fiberglass reinforced plastic sheets as inner and outer surfaces, PU foam and core and high-strength adhesive bonding together under high vacuum pressure. The gelcoat on surfaces are FDA approved, friendly to food. The panels can be used to build various kinds of commercial truck bodies, caravan bodies, semi-trailer bodies, mobile shelters, etc.

Frp Pu Foam Sandwich Panel,Frp Pu Panel,Fiberglass Polyurethane Foam Panel,Frp Pu Sandwich Panel

YANGZHOU MAXTONE COMPOSITE CO.,LTD. , https://www.maxtonetruckbody.com