Concrete vibrator usage specification
Introduction: Before the operation of the concrete vibrating bar, check whether the power line connection method is correct. After the electricity is turned on, if there is no vibration of the concrete vibrating bar, generally the concrete vibrating bar can be swayed to the ground until the vibration emits a steady and powerful squeak. After that, vibrating operations can be performed. 1. Before the concrete vibrating rod is in operation, check whether the power line connection method is correct. After the power is turned on, if there is no vibration of the concrete vibrating rod, generally the concrete vibrating rod can be swayed to the ground until the vibration emits a steady and powerful squeak. After that, vibrating operations can be performed. Checking Fixture,Sheet Fabrication Machining,Cnc Machining Part,Laser Cutting Parts JING SUNG Precision CO., , https://www.zjcncmachining.com
2. When the concrete vibrating rod is working, the concrete vibrating rod should be inserted into the concrete vertically or obliquely, and the concrete vibrating rod should be traversed up and down when vibrating for a certain period of time.
3. In the case of layered pouring on a building or building, when vibrating the next floor, the concrete vibrating rod should be inserted into the vibrated bed to eliminate the indirect seam and achieve the overall effect.
4. After the concrete vibrating rods work continuously for half an hour, they should stop for a period of time to prevent the mechanical heating from even damaging the parts.