Connect the positive pole of the battery to the positive pole of the power supply and the negative pole of the battery to the negative pole

The initial charging is carried out in two stages: first, the initial charging current is charged to the electrolyte to release bubbles, and the cell voltage rises to 2.3 to 2.4V. Then, the current is reduced to 1/2 initial charging current, and the charging is continued to the electrolyte to release a vigorous bubble, which is stable for 3 consecutive hours. The total charging time is about 45~65h.

During the charging process, the temperature of the electrolyte should be measured by halving the current, stopping charging or cooling. The temperature is controlled at 35~40 °C. When the initial charging is completed, if the specific gravity of the electrolyte is not specified, distilled water or electrolysis with a specific gravity of 1.4 is applied. The liquid is adjusted. After adjustment, recharge for 2 hours until the specific gravity meets the requirements.

The new battery often fails to reach capacity after the first charge, and a discharge cycle should be performed. Discharge at a discharge rate of 20hh, and then replenish the charge current. If the capacity is still less than 90% of the rated capacity after one charge and discharge cycle, a charge and discharge cycle should be performed.

Slurry Pump

Slurry pump refers to a device that converts electrical energy into kinetic energy and potential energy of the medium by means of centrifugal force (the rotation of the impeller of the pump) to increase the energy of the solid and liquid mixed medium. Mainly used in: mining, power plant, dredging, metallurgy, chemical industry, building materials and petroleum and other industries.

Slurry Pump,Submersible Sludge Pump,Slurry Screw Pump,Slurry Pump Centrifugal

Jiangsu Qiantu Trading Co., Ltd. , https://www.qtpumptrade.com