DF9012 intelligent speed monitor, DF9012 intelligent speed monitor
Stamping die frame: the perfect combination of manufacturing process and market development
Stamping Mould base,Automotive Electromechanical Products,Non-standard Mold Insert processing and manufacturing,Data Cable Interface Shuaigang Mould Base (Yixing) Co., Ltd , https://www.shmouldbase.com
HN-4 single channel differential/axial displacement monitor is a precision relative displacement measuring instrument equipped with HN800 eddy current sensor for continuous monitoring of large shaft or rotor during start-stop and operation of rotating machinery. Axial position. The axial displacement is the inside of the machine, the rotor is along the axial direction, and the measurement of the axial displacement relative to the gap between the thrust bearings can indicate the axial clearance between the rotating component and the fixed component. For example, steam turbines, gas turbines, water turbines, centrifuges and axial compressors, etc., bearing position is a very important signal, too large axial position will cause large mechanism damage, and axial displacement monitor, Damage to the push bearing can provide early warning and protection. Fully digitalized, with good stability, high accuracy, simple operation, convenient and reliable maintenance.
The main function
Monitoring and protection of the axial position of rotating machinery such as steam turbines, turbines, compressors, blowers, etc.
Function Description:
1. Display function axial displacement measurement value, alarm and stop setting value, which can be displayed on the LED digital tube.
2. The alarm function alarm, stop, and input signal failure are respectively indicated by LED lighting tubes.
3. Alarm delay time setting function The alarm delay time adjustment range is 0~3 seconds to prevent accidental alarm caused by on-site interference.
4. Self-diagnostic function Any input system failure, such as probe wear, poor wire contact or breakage can be detected, and the alarm and shutdown output circuit are cut off.
With power-on, power-down detection function, and disconnect the alarm output loop, it can effectively suppress the monitor's false alarm.
5. The output interface is equipped with a 4-20mA current output universal interface, which can be connected with computers, DCS, PLC systems, paperless recorders and other equipment.
Technical Parameters:
Sensor input: HN800 eddy current displacement sensor, frequency response: 0 ~ 10KHz
Display mode: 3-digit 0.8-inch LED digital display, accuracy: ±0.5%
Measuring range: -6.0~+6.0mm, range optional
Current output: 4 to 20 mA or 0 to 10 mA, load? 500 Ω
Alarm contact capacity: AC220V/3A, DC28V/3A
Working environment: Temperature: 0~55°C Relative humidity: ≤95%
Working power: AC 220VAC±10% 50Hz Power consumption ≤10W
Installation method: Disk size: 160 (width) × 80 (height) × 225 (length) mm.
SG-2 vibration sensor KR-939B fan safety operation monitor, KR-939B3 fan safety monitor, KR-939B4 fan safety monitor, KR-939B4-4 equipment safety monitor, KR-32 dual channel Equipment safety monitor, KR-34 four-channel equipment safety monitor, KR-939NCS type fan speed frequency meter
VB-Z500B Rotating Machinery Condition Monitoring and Protection Table, VB-Z412 Dual Channel Shaft Displacement/Expansion Difference Monitor, VB-Z410/410A Shaft Displacement/Differential Expansion Monitor, VB-Z430F Dual Channel Bearing Vibration Monitor, VB-Z430 Double Channel bearing vibration monitor
VB-Z720 dual channel water swing monitor, VB-Z730 dual channel water vibration monitor, VB-Z420 dual channel vibration monitor, VB-Z470B wall mount positive and negative monitor, VB-Z470 positive and negative Monitor, VB-Z440 speed monitor
DF9012 intelligent speed monitor, DF9012 intelligent speed monitor
XZD-LG wall-mounted vibration intensity monitor, XZD-L vibration intensity monitor, XZD-4 four-channel vibration monitor, XZW-D axial displacement, differential monitor, XZS-04 intelligent speed monitoring Instrument, XZD-Z type shaft vibration monitor, XCW-R type thermal expansion stroke monitor, XCW-U type tank oil level monitor, XCW-Y oil motor stroke monitor, XZD-W type vibration monitor
WB8100E rotating machinery monitoring instrument, WB8600EH hydro-generator status monitoring instrument, WB8800E rotating machinery monitoring system, WB8501C digital display axial displacement monitor, WB-8381GE intelligent speed monitor, MLI-2001 dual-channel vibration monitor, XSM series Tachometer, WB8521C digital display relative expansion monitor, WB-8531C digital display thermal expansion monitor, WB-8112B digital display dual channel vibration monitor
JM-B-6Z monitoring and protection device, JM-B-6000 steam turbine monitoring and protection device, JM-B-3E dual channel vibration monitoring and protection device, JM-B-7 intelligent vibration monitoring and protection instrument, JM-B-201 intelligent vibration temperature Detector, JM-B-4 vibration temperature monitoring and protection device, JM-B-3Z intelligent vibration monitoring and protection device, JM-B-6Z (402) monitoring and protection device, JM-B-5S vibration monitoring and protection device, JM-X -3 series intelligent travel monitoring and protection instrument, JM-X-3W intelligent axial displacement monitoring and protection instrument, JM-X-3Z intelligent differential expansion monitoring and protection instrument, JM-C-3 series intelligent speed monitoring and protection instrument, JM-C- 7F wall-mounted anti-rotation speed monitoring and protection instrument, JM-C-5S speed monitoring and protection instrument, JM-C-6C three take two speeding monitoring and protection instrument
8000/B/C/E series combined monitoring and protection device, RDZW series axial displacement monitor, RDCZ series differential expansion monitor, RDXZ series shaft vibration monitor, CZJ-B series vibration monitor, CZJ-4D type four channel Vibration monitor
SZC-04 series intelligent tachometer, SZC-04F series intelligent speed anti-rotometer, DZC-02A tachometer
HZD-8500/C/D turbine monitoring and protection device, HZD-RSDC type overspeed protection device, 8500B rotating machinery monitoring and protection system, HZW type axial displacement monitor, HZW-Z type intelligent differential expansion monitor, HZS-04N type intelligent Tachometer
VS-068/VS-069/VS-077/VS-079/VS-080/VS-168/VS-169/VS-177/VS-277/VS-288/VS-289/Watt vibration speed sensor
PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 electric absolute vibration tile sensor
PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor
TM0782A-K/TM0783A/TM0793V-K/TM079VD Watt Vibration Sensor PT079VD Low Frequency Magnetoelectric Speed ​​Displacement Sensor
SD-051/IN-081/IN-083/IN-084/IN-085/INA-081/INA-083/INA-085/DS-1051/DS-1052/DS-1053/DS-1054/SD- 052/SD-053/SD-054/SD-081/SD-083/SD-084/SD-087/SD-088/SD-089/SDH-151/SDH-154/SD-161/
SD-164/WT-010/WT-025 eddy current axis displacement sensor shaft vibration probe
OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165 eddy current axis displacement sensor shaft vibration Probe front end
EC-001/EC-002/EC-003 eddy current axis displacement sensor shaft vibration probe extension cable
PR6422/PR6423/PR6424/PR6425/PR6426 eddy current axis displacement sensor shaft vibration probe CON011/91,
Technical parameter sensitivity 20~50mv/mm/s±1% (according to user adjustment) Frequency response (optional) 5~100hz, 10~500hz, 10~1000hz natural frequency about 10hz amplitude limit 2mm (peak-peak) Zui large acceleration 10g installation method vertical; horizontal; vertical, horizontal dual-use temperature range -30 ° C ~ 120 ° C relative humidity to 95% non-condensing Dimensions φ 35 × 78mm weight about 350g installation thread m10 × 1.5 ordering guide selection code trlv-a □ □-b□□Selection Description Sensitivity a□□01——20mv/mm/s; 02——30mv/mm/s; 03——50mv/mm/s measurement direction b□□01——vertical; 02— - level; 03 - vertical and horizontal dual-purpose sz-5/sz-6/sz-6b/trlv/tm0793v/tm079vd/9200/74712/47633 magnetic vibration vibration speed sensor cd-1/cd-2/cd- 4/cd-4a/cd-6/cd-6a/cd-7-c/cd-7-s/cd-8/watt cover vibration sensor cd-21-2-c/cd-21-2-s/ Cd-21-t/cd-21c/s/bcd-21a/cd721/wind vibration speed sensor mls-9/mlv-6/mlv-7/mlv-8/mlv-9200/mlv-9268/mlv-27/ Mt1/mt2t/mt3t/mt3m/vibration sensor cs-cd-001/cs-cd-010/od9200/od9300/s6000/pr9266/pr9268/20/30/60/70/bearing vibration sensor mlv-9200 (16699/900 )/9200/74712 /47633/ht-2zd-24/zd25/zdf bearing vibration speed sensor vb-z9500/vb-z9600/sj1061/sj1062 magnetoelectric vibration speed sensor tm0782a/tm0783a/ca-yd/yd/kd/tm0782a/winh/mta /pr9270/shq-25x/200150/200155/200157/200350/200355/ca-gt acceleration sensor lvdt displacement sensor 1000td2000td3000td4000td5000td6000tdczj-b2/cz-6/cjz-d/cjz-d2/mli-2001/wb-9902/wb -8112b/zj2/zj2-a/bearing vibration monitoring and protection instrument 8500/85100xy/85564/85200/85850bcd-21a/vibrocontrol110/en900/en2000a1/vibration monitoring instrument zxp-f3200/zxp-j116/zxp-j200/zxp-j210 /zxp-j220/dzx-400/pdm1201/wli-2004/wli-2003/wli-2001/s2662/vrs2000a11/wli-2011/pt2010/11 Dual-channel bearing vibration monitor zxp-j400/zxp-j510/zxp— J520/xd-2/xzk-1/od-9008s/Double-channel tile cover vibration measuring instrument od9004/s2162/s2112/vb-z420/vb-z430/vrs2000a11/vrs2000a1 vibration monitor vrs2000a3/vrs2000a4st-101/emt226/vib -10b/vib-5/zdy/pt908/sj-2011 bearing vibration monitoring instrument sj-2012/sj-2031/sj-2021/sj-2022/sj-2051/sj-2052 vibration detection and protection instrument tr81/dwqz/trin /7200/3300/pr6422/pr6423/pr6424/pr6425/pr6426/ eddy current displacement Sensor sd081082/85811/tm0180/tm0105/tm0182/winw/qh8500/se/cwy-do/axial displacement sensor ky8500/od9000/9000xl/s2100/s2200/vb-z9100/mlw3300/wd220 non-contact displacement sensor rdzw-2na /czqz/rdzw-2/rdzw-2n/wb-8501c/8521c/8531c/85300-dw/axial displacement monitoring and protection instrument 85350/85710/en2000a2/hy-01/tpm/dtpm/od9006/s2102/vrs2000a2/axis Displacement monitoring monitor rdzw-2na/czqx/rdcz/rdcz-2/85710/hy-02/dem/ddem/s2161a/vrs2000a5/Expansion monitoring and protection device szcb-01/pr9376/sm-10/12/14/ 16/t-03/szmb-5/9/szmb-01 magnetoresistive speed sensor smcb-01/s16/sms-12/16/e12-e12s-e58a-e58s/d12-d12p/f12a-f12s-f58a- F58s/y12ad/dsd/dsf/dse/dsh magnetic sensitive speed sensor hk-16/cm16/s16/hb2032/sc12-20k/gvs gear speed sensor dzc-02/dzc-02a tachometer dm504/hy-zs3/szc -04f1/wz-7a anti-speed detection monitoring protection table hy-zs3f anti-speed sensor szc-04/szc-04b/szc-04f/85700/85790/jms/hy-01/xsm/df9011 intelligent tachometer monitoring protection instrument xjp -10b/02a/42a/xsv-01/sqy01t/mft/sqy11-04/ras/sky/szc/sqyc/cs-1/sqy01/qydpm/sqy08td intelligent speed digital display instrument ai-tek(airpax)/tach- Pak1tac H-pak3tachtrol2tachtrol3/mv-vi intelligent speed monitor wz-3c/wz-1d/wz-6a/ai-tek(airpax)/en2000a3/smart tachometer hy-zs1/hy-zs2a/hy-bt1/hy- Zs2/hy-zs3/hy-cs1/od9001/s2183/s2181/Intelligent tachometer vb-z410/vb-z440/vb-z470/vrs2000a7/xhf-201/wb-8581 intelligent speedometer df9032 thermal expansion monitor sw-2 /td-2 type displacement monitor 3500/3300/7200/pt2060/pt2010/rms700/mms3000/mms6000/vb4000/tn8000/win2000/vm600/en8000/en9000/mv2000/mv3000/s8100/8500/9000/zxp-jk6600/ S32000/s36000/8000b series rotating machinery monitoring and protection device slmcd-21t/winyv/zd8133/od9200t/mls/v-9/fzb/ymlv/jx73/jx73st/bj230 integrated vibration transmission tr2001/tr2011/tr2031/tr2061/tr2081/ Trzf/tr95 transmitter dtm/tm101/tm201/tm202/tm301/tm302/tm501/tm502/transmitter slm/winv/en2000a4/en2000a5/en2000a6/transmitter zxp-t100/zxp-t110/zxp-t120/ Wz-5a/wz-5b/zd24-zf-1/zd24-zf-2 transmitter od9200-b/s9210/s9220/s9260/s9860/02/s9820/02/s9881/01/jx5151/jx5121 transmitter Vb-z330/vb-z310/vb-
Z320/mms3110/mms3120/mms3210/mms3311/mms3410/vrs20/mlv/d transmitter vib-15a/hr-2000/tr4101/sj6011/sj6021/sj6031 transmitter tm0540/3300xl/win-400/hy-xy1/ Od-9003(a/b)/s21310/vrs4000/xq-15/dz-30 eddy current probe static calibrator
HZS-04F intelligent anti-tachometer, HZS-04T wall-mounted intelligent tachometer, HZS-04 intelligent tachometer, HZS-04M electronic module tachometer, HZS-04C intelligent tachometer, HZD-Z/W Type wall-mounted intelligent vibration temperature monitor HZD-W/L type intelligent vibration monitor, HZD-W/L type four-channel vibration monitor, HZD-Z type intelligent axis vibration monitor, HZD-W type intelligent vibration monitor , HZD-L type intelligent vibration intensity monitor, HXW-U type intelligent fuel tank oil level monitor, HXW-Y type intelligent oil motivation monitor, HXW-R type intelligent thermal expansion monitor
8500LD dual channel intensity monitor, 8500ZD dual channel vibration monitor SW-2 displacement monitor, RDPX eccentric monitor, 85200-W displacement monitor
MLI3000 vibration monitor, MLI-2001 speed detector, MLI-2010 water swing monitor, MLI-2009 eccentric monitor, MLI-2007 speed monitor, MLI-2005 differential monitor, MLI-2004 bearing vibration intensity Monitor
SZ-5/SZ-6/SZ-6B/TRLV/TM0793V/TM079VD/9200/74712/47633 Magnetoelectric Vibration Speed ​​Sensor
CD-1/CD-2/CD-4/CD-4A/CD-6/CD-6A/CD-7-C/CD-7-S/CD-8/Watt Cap Vibration Sensor
CD-21-2-C/CD-21-2-S/CD-21-T/CD-21C/S/BCD-21A/CD721/WIND vibration speed sensor
MLS-9/MLV-6/MLV-7/MLV-8/MLV-9200/MLV-9268/MLV-27/MT1/MT2T/MT3T/MT3M/Vibration Sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/ Bush vibration sensor
MLV-9200 (16699/900) / 9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed sensor
VB-Z9500/VB-Z9600/SJ1061/SJ1062 magnetoelectric vibration speed sensor
TM0782A/TM0783A/CA-YD/YD/KD/TM0782A/WINH/MTA/PR9270/SHQ-25X/200150/200155/
200157/200350/200355/ CA-GT Accelerometer
LVDT Displacement Sensor 1000TD 2000TD 3000TD 4000TD 5000TD 6000TD
CZJ-B2/CZ-6/CJZ-D/CJZ-D2/MLI-2001/WB-9902/WB-8112B/ZJ2/ZJ2-A/Axis vibration monitoring and protection device
8500/85100XY/85564/85200/85850BCD-21A/VIBROCONTROL110/ EN900/EN2000A1/Vibration Monitoring Instrument
ZXP-F3200/ZXP-J116/ZXP-J200/ZXP-J210/ZXP—J220/DZX-400/PDM1201/WLI-
2004/WLI-2003/WLI-2001/S2662/
VRS2000A11/
WLI-2011/PT2010/11 dual channel bearing vibration monitor
ZXP-J400/ZXP—J510/ZXP—J520/XD-2/XZK-1/OD-9008S/Double-channel tile cover vibration measuring instrument
OD9004/S2162/S2112/VB-Z420/VB-Z430/VRS2000A11/VRS2000A1 vibration monitor
VRS2000A3/VRS2000A4ST-101/EMT226/VIB-10b/VIB-5/ZDY/PT908/SJ-2011 bearing vibration monitoring instrument
SJ-2012/SJ-2031/SJ-2021/SJ-2022/SJ-2051/SJ-2052 vibration detection and protection device
TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/Electro-Vortex Displacement Sensor
SD081082/85811/TM0180/TM0105/TM0182/WINW/QH8500/SE/CWY-DO/Axial Displacement Sensor
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/
WD220 non-contact displacement sensor
RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/85300-DW/Axial Displacement Monitoring and Protection Device
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/ VRS2000A2/Axial Displacement Detection Monitor
RDZW-2Na/CZQX/RDCZ/RDCZ-2/85710/
HY-02/DEM/DDEM/ S2161A/
VRS2000A5/Expansion monitoring and protection device
SZCB-01/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01 Reluctance Speed ​​Sensor
SMCB-01/S16/SMS-12/16/E12-E12S-E58A-E58S/D12-D12P/F12A-F12S-F58A-F58S/
Y12AD/DSD/DSF/DSE/DSH magnetic sensitive speed sensor
HK-16/CM16/S16/HB2032/SC12-20K/GVS Gear Speed ​​Sensor
DZC-02/DZC-02A tachometer
DM504/HY-ZS3/WZ-7A anti-rotation speed monitoring and protection table
HY-ZS3F anti-speed sensor
SZC-04/SZC-04B/85700/85790/JMS/HY-01/XSM intelligent tachometer monitoring and protection device
XJP-10B/02A/42A/XSV-01/SQY01T/MFT/SQY11-04/RAS/SKY/SZC/SQYC/CS-1/
SQY01/QYDPM/SQY08TD intelligent speed digital display
AI-TEK (AIRPAX)/Tach-pak1Tach-pak3Tachtrol2Tachtrol3/MV-VI intelligent speed monitor
WZ-3C/WZ-1D/WZ-6A/AI-TEK(AIRPAX)/EN2000A3SZC-04/SZC-04B/Intelligent Speed ​​Measuring Instrument
HY-ZS1/HY-ZS2A/HY-BT1/HY-ZS2/HY-ZS3/HY-CS1/OD9001/S2183/S2181/Smart Tachometer
VB-Z410/VB-Z440/VB-Z470/ VRS2000A7/ XHF-201/WB-8581 intelligent speedometer
DF9032 thermal expansion monitor
3500/3300/7200/PT2060/PT2010/RMS700/MMS3000/MMS6000/VB4000/TN8000/WI
N2000/VM600/EN8000/EN9000/MV2000/MV3000/S8100/8500/9000/ZXP—JK6600/S32000/
S36000/8000B series rotating machinery monitoring and protection device
TR2001/TR2011/TR2031/TR2061/TR2081/TRZF/TR95 transmitter
DTM/TM101/TM201/TM301/SLM/WINV/EN2000A4/EN2000A5/EN2000A6/VIB-15a/Transmitter
ZXP-T100/ZXP-T110/ZXP-T120/WZ-5A/WZ-5B/ZD24-ZF-1/ZD24-ZF-2 Transmitter
OD92 SLMCD-21T/ WINYV/ ZD8133/
OD9200T/MLS/V-9/ FZB/YMLV/JX73/JX73ST/BJ230 integrated vibration transmission
00-B/S9210/S9220/S9260/S9860/02/S9820/02/S9881/01/JX5151/JX5121 Transmitter
VB-Z330/VB-Z310/VB-Z320/MMS3110/MMS3120/MMS3210/MMS3311/MMS3410/VRS20/MLV/D Transmitter HR-2000/TR4101/
SJ6011/SJ6021/SJ6031 Transmitter
TM0540/3300XL/WIN-400/HY-XY1/OD—9003(A/B)/S21310/VRS4000/XQ-15/DZ-30 Eddy Current Probe Static Calibrator
MTN/1185IC/VP-201/202 wattage vibration velocity sensor S-YTH vibration measuring device TM016-001-530-00-0/TM016 seismic velocity acceleration vibration sensor transmitter
VS-068/VS-069/VS-077/VS-079/VS-080/VS-168/VS-169/VS-177/VS-277/VS-288/VS-289/Watt vibration speed sensor
PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 electric absolute vibration tile sensor
PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor
TM0782A-K/TM0783A/TM0793V-K/TM079VD Watt Vibration Sensor PT079VD Low Frequency Magnetoelectric Speed ​​Displacement Sensor
SD-051/IN-081/IN-083/IN-084/IN-085/INA-081/INA-083/INA-085/DS-1051/DS-1052/DS-1053/DS-1054/SD- 052/SD-053/SD-054/SD-081/SD-083/SD-084/SD-087/SD-088/SD-089/SDH-151/SDH-154/SD-161/ SD-164/ WT-010/WT-025 eddy current axis displacement sensor shaft vibration probe
OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165 eddy current axis displacement sensor shaft vibration Probe front end
EC-001/EC-002/EC-003 eddy current axis displacement sensor shaft vibration probe extension cable
PR6422/PR6423/PR6424/PR6425/PR6426 eddy current axis displacement sensor shaft vibration probe CON011/91, CON021/91, CON031/91 eddy current axis displacement sensor shaft vibration probe front end
TM0105/TM0180/TM0110/TM0120/TM0393 eddy current axis displacement sensor shaft vibration probe TM0182 eddy current axis displacement sensor shaft vibration probe front end TM0181 eddy current axis displacement sensor shaft vibration probe extension cable
MMS6110 dual channel shaft vibration measurement module MMS6120 dual channel vibration measurement module MMS6210 dual channel displacement measurement module MMS6220 dual channel axis eccentricity measurement module MMS6312 dual channel speed key phase module MMS6410 dual channel cylinder expansion measurement module MMS6418 absolute relative differential measurement module MMS6831RS485 Communication unit MMS6823RS485 conversion module DOPS three take two speed measurement system
PT2010/11 dual-channel casing vibration (acceleration/speed/displacement) monitoring instrument PT2010/21 dual-channel vibration monitoring instrument PT2010/22 dual-channel axial position monitoring instrument PT2010/25 dual-channel swing/eccentric monitoring instrument PT2010/26 double Channel expansion monitoring instrument PT2010/51 dual channel speed monitoring instrument PT2010/51D dual channel speed monitoring instrument PT2010/53 three redundant overspeed protection instrument PT2010/62 dual channel housing expansion monitoring instrument
MMS3110 Dual Channel Shaft Transmitter MMS3120 Dual Channel Wattle Transmitter MMS 3125 Dual Channel Bearing Transmitter
MMS3210 dual channel shaft displacement transmitter MMS3311 dual channel speed key phase transmitter MMS3410 dual channel cylinder expansion transmitter
DTM10 eddy current sensor monitoring module DTM10-201 radial vibration monitoring instrument DTM10-202 axial displacement monitoring instrument
DTM10-301 radial vibration monitoring instrument DTM10-302 axial displacement monitoring instrument DTM10-501 speed / key phase monitoring instrument
DTM10-502 speed / key phase monitoring instrument DTM20 intelligent digital chassis vibration monitoring instrument DTM20-101 chassis vibration monitoring instrument
TM900 Power ConverterTM101 Acceleration, Speed, Displacement Vibration Protection Meter TM201/TR4101 Shaft Vibration Transmitter Protection Meter
TM202/TR4102 shaft position expansion differential transmission protection instrument TM301 shaft vibration transmission protection instrument TM302 shaft position transmission protection instrument
TM501 speed key phase monitoring instrument TM502 speed key phase monitoring instrument
TM0302/TM0306 all weather protection box TM0312/TM0314 explosion-proof enclosure TM0393 eddy current probe housing
TM0510-K Portable Vibration Calibration Table TM0520-K Portable Adjustable Frequency Vibration Calibration Table TM0540 Portable Eddy Current Sensor Static Calibration Instrument PT908 Portable Vibration and Bearing Measuring Instrument
VIBROCONTROL 800/VIBROCONTROL 868/VIBROCONTROL 869 bearing vibration wobble switch
VIBROCONTROL 920 bearing vibration monitor instrument VIBROCONTROL 1000 bearing vibration tile vibration transmitter
VIBROCONTROL 1100/VC 1100 C01/VC 1100 C02/VC 1100 C11/VC 1100 C12 Bearing Vibration Transmitter
VIBROCONTROL 4000/VB-410/VB-420/VB-430/CI-411/CI-421/CI-431 Mechanical Protection System
VIBROCONTROL 6000/CV-114/CV-112/CV-101/BC-112/RV-117/AP-327 mechanical protection system
AS-020/AS-022/AS-030/AS-060/AS-062/AS-065/AS-070/AS-080/4391/4391E/5704/5874/5958/8315/8324/8325/8326/ 8327/8331/8332 accelerometer
330500/330525/330750/190501/9200/74712/47633/330400/330425/200350/200150/200155/350900/26530/9200/74712/47633 wattage speed sensor wattage probe 9200-01-05-10-00 watt Shock probe 21000-16-10-15-050-03-02
HY-101/HY-102/HY-103/HY-103B/HY-103C/HY-103E/HY-104/HY-105/HY-106/HY-106C/HY-107/HY-107R/HY- 108/HY-109A vibration meter
VIBRA double channel tile vibration monitor instrument CZ-6/6c dual channel digital display vibration instrument
CZJ-B2/CZJ-B3/CZJ-B3G/CZJ-B4/CZJ-B4G/CZ-6/CJZ-D/CJZ-D2/MLI-2001/WB-9902/WB-8112B/ZJ2/ZJ2-A double Channel wall-mounted roof vibration measuring instrument bearing bush vibration monitoring and protection instrument
8500LD/85100XY/85564/85200/85850BCD-21A/VIBROCONTROL110/EN900/EN2000A1/Double-channel tile vibration monitor instrumentation
ZXP-F3200/ZXP-J116/ZXP-J200/ZXP-J210/ZXP—J220/DZX-400/PDM1201/WLI-2004/WLI-2003/WPDM1201/LI-2001/S2662/VRS2000A11/WLI-2011/PT2010/ 11 dual channel tile shock bearing vibration monitor instrument
ZXP-J400/ZXP—J510/ZXP—J520/XD-2/XZK-1/OD-9008S/Double-channel tile cover vibration meter measurement instrument
OD9004/S2162/S2112/VB-Z420/VB-Z430/VRS2000A11/VRS2000A1 dual channel vibration monitor instrument
VRS2000A3/VRS2000A4ST-101/EMT226/VIB-10b/VIB-5/ZDY/PT908/SJ-2011/RDXZ/RDXZ-2 dual-channel bearing vibration tile vibration monitor instrumentation
SJ-2012/SJ-2031/SJ-2021/SJ-2022/SJ-2051/SJ-2052/TK77/TK81 dual channel tile vibration detection and protection instrument
SZ-S/SZ-SC/SZ-6B/SZ-4/SZ-5/SZ-6/SZ-6B/SZ-6C/SZ-6I/TRLV/TM0793V/TM079VD/WZTK-24/EN 080/EN 090 dual channel magnetoelectric vibration speed tile sensor
CD-1/CD-2/CD-4/CD-4A/CD-6/CD-6A/CD-7-C/CD-7-S/CD-8/Double-channel tile cover vibration sensor
CD-21-2-C/CD-21-2-S/CD-21-T/CD-21-TA/CD-21C/S/BCD-21A/CD721/WIND Watt Vibration Velocity Sensor
MLS-9W/MLV-9W/MLV-6/MLV-7/MLV-8/MLV-9200/MLV-9268/MLV-27/MT1/MT2T/MT3T/MT3M vibration tile sensor
CS-CD-001/CS-CD-010/OD9200/OD9300/S6000/PR9266/PR9268/20/30/60/70/Axis vibration vibration sensor
MLV-9200(16699/900)/9200/74712/47633/HT-2ZD-24/ZD25/ZDF bearing vibration speed shock sensor expansion differential / axial displacement monitor
VB-Z9500/VB-Z9600/SJ1061/SJ1062 magnetoelectric vibration speed tile sensor
TM0782A/TM0783A/CA-YD/YD/KD/TM0782A/WINH/MTA/PR9270/SHQ-25X/200150/200155/200157/200350/200355/CA-GT Acceleration Sensor Six-Wire LVDT Displacement Sensor 1000TD 2000TD 3000TD 4000TD 5000TD 6000TD 7000TD 8000TD 9000TD 10000TD 11000TD 12000TD three-wire LVDT displacement sensor HR-DC displacement sensor, 3000HR-DC, 1000HR-DC, 500HR-DC, 200HR, 500HR, 1000HR, 2000HR, 3000HR, 5000HR, 10000HR PTS420 displacement sensor, PTS420 valve position Transmitter, PTS420-5000 position sensor, PTS420-10000 HCT420 displacement sensor, HCT420 position transmitter, HCT420-5000 position sensor, HCT10000, HCT IS5000, HCT IS 10000 GCA/GCD rebound displacement sensor, GCA rebound Displacement Sensor, GCD Rebound Displacement Sensor, GCD-SE, HC485 LBB Ultra Precision Displacement Sensor, LBB-315PA, LBB-375PA
ATML-M1450-0600AT100/BTL5-E10-M0350-P-S32 Displacement Sensor JY PRT LVDT Shift Sensor
SMU9000/SMU9200/KD2300/KD2306/KD2440/KD2446/KD2446-9C/KD2446-5CM/KUDA/8000/SMU-9000/9200/KD-5100/DIT-5200/GageProx/ThreadChecker eddy current displacement sensor shaft vibration probe front Device
EP080/EP200/EP340/EP480 eddy current axis displacement sensor shaft vibration probe
ECPD/ECPD/85/ECPD/60/ECPD-2 eddy current axis displacement sensor shaft vibration probe front end
330301/330302/330303/330601/330602/330603/330604/330851/130713 eddy current axis displacement sensor shaft vibration probe expansion/axial displacement monitor
330101/330102/330103/330104/330105/330106/330140/330141/330191/330192/330193/330194/330195/330196/330197/330198 eddy current displacement sensor shaft vibration probe
330701/330702/330703/330704/330705/330706/330707/330708/330709/330710 eddy current axis displacement sensor shaft vibration probe
330901/330902/330903/330904/330905/330906/330907/330908/330909/330910 eddy current axis displacement sensor shaft vibration probe
330600/330180/330780/330850/330300/330980 eddy current axis displacement sensor shaft vibration probe front end
330630/330130/330190/330730/330854/330330/132501/330930/8200 eddy current axis displacement sensor shaft vibration probe extension cable eddy current sensor DF310880/CWY-DO 810803-00-03-10-02
DWQZ8108-01/8108-02/8108-03/8111-01/8111-02/8111-03/8125-01/8125-02/8125-03/8200/8300/QRD/HRD rod eddy current axis displacement sensor Shaft vibration probe front end QZHF-1 front guard cover
SDW-i/TR81/DWQZ/TRIN/7200/3300/PR6422/PR6423/PR6424/PR6425/PR6426/CWY-DO/8108-01/8108-02/8108-03/8111-01/8111-02/8111- 03/8125-01/8125-02/8125-03/CWY-DO-20T08 eddy current axis displacement sensor shaft vibration probe front end
SD081082/85811/TM0180/TM0105/TM0182/WINW/QH8500/SE/CWY-DO/8300/HTW Axial Displacement Sensor Shaft Vibration Probe Front End
KY8500/OD9000/9000XL/S2100/S2200/VB-Z9100/MLW3300/WD220/QRD/HRD/QZHF rod non-contact displacement sensor shaft vibration probe front-end
RDZW-2Na/CZQZ/RDZW-2/RDZW-2N/WB-8501C/8521C/8531C/85300-DW/16C4-A axial displacement monitoring and protection instrument display table
85350/85710/EN2000A2/HY-01/TPM/DTPM/OD9006/S2102/VRS2000A2/HZWY-20A/ZQZ-10/ZQZ-11/ZQZ-21/ZQZ-II axial displacement detection monitor instrument turbine axial displacement Measuring protection device
RDZW-2Na/CZQX/RDCZ/RDCZ-2Na/85710/HY-02/DEM/DDEM/S2161A/VRS2000A5/HZWY-20A/WB-8521C Differential monitoring and protection instrument meter relative expansion monitor instrument
S-ZS/SZCB-01/SZCB-02/SZCB-03/SZCB-04/PR9376/SM-10/12/14/16/T-03/SZMB-5/9/SZMB-01/SZMB-3/ SZMB-4/ZS-01/ZS-03/ZS-02/ZS-04/KMY20M/KMY/Z20S/KMY20M1/SM6-XS12JK-3P/Y-XG-3 Magnetoresistive Speed ​​Sensor
SZMB-5/SZMB-5-B/SZMB-5T/SZMB-7/SZMB-8/SZMB-9SZMB-9/SZMB-9-B/SZMB-10/SZMB-10/SZMB-11/SZMB-12/ SZMB-14/SZMB-16/SZMB-18/explosion-proof magnetic speed sensor
SMCB-01/SZMZ—01/SZMZ—02/S16/SMS-12/16/E12-E12S-E58A-E58S/D12-D12P/F12A-F12S-F58A-S-HC/F58S/Y12AD/DSD/DSF/ DSE/DSH/km115-1/km115-2/km115-3/km115-4/magnetic sensitive speed sensor
TD-02/TD-03/HK-16/CM16/S16/HB2032/SC12-20K/GVS/SGZP-K1/KGSS/GTS-211B/GTS211A Gear Speed ​​Sensor
DZC-02/DZC-02A/37506A/HZQS-02A/HZQW-03A/HZC-12/HZQS-03A speed instrument
DM504/HY-ZS3/SZC-04F1/WZ-7A/IC-3A positive and negative speed detection monitoring and protection instrument
HY-ZS3F/RTB-S/CS-3F forward and reverse speed sensor DSE 1010.00 ZTZ/DSE 1010.00 STZ/DSE 1210.20 P13HZ 2835870
DSE 1210.20 P4HZ 2838155/DSE 1010.19 SHZ/DSE 1010.20 SHZ/DSE 1010.07 P3HZ/DSE 1010.21 KHZ/DSE 1010 SHV (2m)/DSE 1010.00 STV (3m)/DSE 0603.00 SHZ (0,2m)
SZC-04/SZC-04B/SZC-04BG/SZC-04F/85700/85790/JMS/HY-01/XSM/DF9011/WB--8381GE/SCM-II intelligent speed meter monitoring and protection instrument instrument expansion/axial Displacement monitor
XJP-10B/02A/42A/XSV-01/SQY01T/MFT/SQY11-04/RAS/SKY/SZC/SQYC/CS-1/SQY01/QYDPM/SQY08TD intelligent speed digital display instrument
AI-TEK(AIRPAX)/Tach-pak1/Tach-pak2/Tach-pak3/Tachtrol1/Tachtrol2/Tachtrol3/MV-VI/TACHPAK1/TACHPAK1/TACHPAK2/TACHPAK3 intelligent speed monitor instrument
WZ-3C/WZ-1D/WZ-6A/AI-TEK (AIRPAX)/EN2000A3/TB-410 intelligent speed measuring instrument instrumentation
WZ-3C-A/WZ-3C-B/WZ-3C-C/WZ-3C-D intelligent transient tachometer instrumentation
With the rapid development of manufacturing industry, stamping die frame as an important processing tool has been widely used in automotive, aviation, electronics and other fields. This article will introduce the basic concept, design principles, production process, market status and development prospects of stamping die frame in detail to help readers better understand this field.
First, the basic concept of stamping die frame
Stamping die frame is a kind of die frame for stamping processing, which is mainly composed of upper die, lower die, die handle, guide post, guide sleeve and other parts. The role of the stamping die is to ensure the accuracy and stability of the mold installation, and to facilitate the stamping operation. According to the processing needs, the stamping die frame can be divided into simplex die frame and multi-station die frame.
Second, the design principle of stamping die frame
The design principle of stamping die frame mainly includes reasonable structure, accurate size and high precision. The structural design needs to be optimized according to product requirements and processing equipment to achieve a smooth and efficient stamping process. Dimensional accuracy is strictly required to ensure the stability and service life of the mold. High precision can improve product quality and production efficiency.
Third, the production process of stamping die frame
The production process of stamping die frame includes three links: processing, assembly and inspection. The processing link includes material selection, cutting, grinding and other steps, requiring strict control of errors. The assembly process needs to ensure the precision and stability of each part. The inspection link tests the overall performance of the mold frame to ensure that it meets the requirements of use.
Fourth, the market status of stamping die frame
At present, the market competition is fierce, and price and quality have become the key factors for enterprise competition. Some large mold enterprises have strong R & D capabilities and technical advantages, can provide high-end stamping die products, the price is relatively high. Some small and medium-sized enterprises rely on the low price strategy to provide middle and low-end products. In general, the quality of stamping products on the market is uneven.