Description:
Gas Chromatography instrument using the whole microcomputer key operation, large-screen LCD LCD display, intuitive, easy to operate, is a new generation of domestic GC, cost-effective excellence, low price, excellent performance, reliable operation.

Application:
1. Analysis of dissolved gas in transformer oil;
2. Analysis of ethylene oxide in medical devices
3. Coke oven gas analysis;
4. Pesticide residue analysis;
5. Analysis of alcohol in the blood;
6. Analysis of natural gas and LPG;
7. Indoor environment TVOC analysis;
8. Composition analysis of liquor;
9. High purity gas analysis;
10. Packaging material solvent residue detection.

Accessory Products:
Top-air injection, gas generator, gas purifier, thermal analyzer, cracker, etc.

Performance:
13-Order program heating, can meet the needs of sample multicomponent analysis.
1.The main control circuit adopts the brand-new integrated digital electronic circuit, the temperature control precision can reach 0.01 ºC, the performance is more stable;
2.program Heating: 13-order, temperature increase rate 0-50ºC/min increment 0.1ºC/min;

The design of the column box is further improved, which facilitates the rapid cooling of the instrument.
1.the large volume, and the intelligent back door system, shorten the Cheng/cooling system stability after the balance time;
2.The temperature variation range of the heating furnace system is +7ºC~400ºC;
3.The user can recalibrate the furnace temperature and set the maximum temperature and the heat balance time.

The uniqueness and selectivity of the sampling system are enhanced.
1.The unique design of incoming sample to solve the discrimination;
2.can be installed at the same time two kinds of sampling system: filling column, capillary shunt/non-shunt injection system (with diaphragm cleaning function);
3.Optional Automatic/manual gas injection valve into the sample, the top of the air sample, thermal analysis of the sample, cracking furnace into the sample, methane conversion furnace.
4.The Double column compensation work can not only solve the program drift caused by heating, but also reduce the influence of background noise, and get a lower minimum detection limit.

Instrument operation interface is easy to learn, full-featured, design more humane.
1.The instrument uses the big screen LCD LCD screen, the display is intuitive, easy to operate;
2.with post self-diagnosis function;
3.stopwatch function (convenient flow measurement), running timer function;
4.Power outage storage protection function;
5.keyboard lock function.
 
The detection system has good stability, high sensitivity and optional detector.
1.can be installed at the same time two kinds of same or different detectors: Hydrogen flame ionization detector (FID), thermal conductivity detector (TCD), Electronic capture detector (ECD), nitrogen and phosphorus detector (NPD), Flame photometric detector (FPD), etc.
2.hydrogen flame ionization detector easy disassembly and installation, easy to clean or replace the nozzle;
3.High Resistance single column thermal conductivity detector detection sensitivity, baseline stable fast (15 minutes can stabilize);
4.input signal can be logarithmic amplification, reduce interference, improve sensitivity.

Parameter:
(The table parameters for the company Standard Model parameters, we support customer customization parameters)

Temperature control
control range	+7ºC~400ºC at room temperature (increment 0.1 ºC)
degree	13
rise rate	0.1ºC~50ºC/min (increment 0.1 ºC)
detectors
Hydrogen Flame ionization detector (FID)
detection limit	≤5X10-12G/S (16 alkanes)
linear range	≥10000000
Baseline noise	≤0.000000000006 A/H
Stable time	≤20min
Thermal conductivity Pool Detector (TCD)
sensitivity	≥10000MV ml/mg (16 alkanes)
Baseline noise	≤16μv (hydrogen with carrier gas 99.999)
Flame Photometric detectors (FPD) Â
detection limit	≤6×10^-13g/s(P)≤5×10^-11g/s(P) (parathion)
Baseline noise	≤2×10-13A/H
Electronic capture Detector (ECD)
Maximum operating temperature	350ºC
detection limit	≤5x10-14g/ml(r-666)
Baseline noise	≤20μV
Nitrogen and phosphorus detectors (NPD)
detection limit	≤1×10-12g/s(N)(Azo benzene)
	≤5×10-13g/s(N)(malathion)
Baseline noise	≤2×10^-13A/H

(The table parameters for the company Standard Model parameters, we support customer customization parameters)

The introduction of Haida

Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.



 
Packaging & Shipping:

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.



 
After-service:

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
 

Large-sized Casting Parts

Large-Sized Casting Parts,Ebm 3D Printer Provider,Delicate Metal Castings,Delicate Metal Parts

Guangdong Fenghua Zhuoli Technology Co., Ltd , https://www.fhzl3d-pequip.com