Why do high-altitude vehicles form carbon deposits?

1. Because of the carbon particles contained in the "lubricant" helium gas, a large amount of carbon particles are deposited incomplete combustion. The aerial vehicle itself also contains various impurities, and it will form sludge-like deposits in fuel tanks, oil inlet pipes, and engines.

2. Because of the olefins in the gasoline of the aerial vehicle, a gum and a resinous viscous material will be formed after combustion. These stickies deposit on the nozzle, intake valve, combustion chamber (cylinder head and piston top) and other parts will become hard carbon deposition.

3. As the air sucked by the aerial vehicle contains fine dust, it cannot be completely filtered out at the air filter. After entering the engine, it accumulates at a high temperature for a long time and mixes the wax in the fuel to form carbon deposits.

4. Long-term low speed and high-speed operation of the aerial vehicles will speed up the formation of carbon deposits.

What is the danger of excessive carbon deposition?

1. Decrease the engine power of aerial vehicles, so that the power output is not uniform and gradually decays, in other words, it is becoming less and less powerful.

2. The fuel consumption of aerial vehicles will gradually increase.

3. The cold start is difficult, and when the vehicle is cold, it is easy to turn off the engine.

4. The deflagration of the carbon in the combustion chamber will be severe, causing the engine of the aerial vehicle to shake significantly.

5. The tail gas emissions of high-altitude vehicles will deteriorate, shortening the life of components such as spark plugs.

6. Affects the sealing performance of the piston rings of aerial vehicles, causing the engine to burn oil.

How to prevent carbon deposition in high-altitude truck engines?

1. Fill high quality gasoline, but high marks do not equal high quality.

2. Do not drive the aerial vehicle at idle speed for a long time.

3. Multi-run high-speed, manual transmission can increase the shift speed.

4. It is found that there are obvious burning oil phenomena that must be checked and repaired in a timely manner.