High Pressure Drum Reel

Model NO.: GY-10
Common Pressure: 18MPa
Package: 430*250*440mm
Pipe Material: Double Layer Steel Wire Braided Rubber Tube
Net Weight: 15kgs
Transport Package: Carton
Origin: China
Model NO.: GY-10
Common Pressure: 18MPa
Package: 430*250*440mm
Pipe Material: Double Layer Steel Wire Braided Rubber Tube
Net Weight: 15kgs
Transport Package: Carton
Origin: China
High pressure water drum reel GY10

Instructions:
1, open structure, easy to installation and maintenance.
2.Spindle aeronautical technology processing,excellent performance, high compressive strength, safe and reliable.
3.180Mpa high pressure pipe, wear resistance, corrosion resistance, hardening, bending resistance, rupture resistance, at low temperatures still roll freely.
4. Turntable is one piece drawing by high tension steel. Structural framework stamping forming. High strength, non deformation, durable and can be installed and used in bad working conditions.
5. The surface is sprayed with plastics, and the paint is not easy to rust and oxidize.
6. Coil spring material superior, flexible, high toughness, long-term use, shrinkage force does not decay.
7. It can be installed on wall, ceiling, worktable, lubrication locomotive.
Features:
1. drum internal maintenance, no need to disassemble the drum shell, more convenient and more efficient.
2.disc: thickening of the wheel, rigidity better, less deformation, the scope of work is greater.
3. Base: double arm, to prevent the long-term use of support deformation loss, more secure, more reliable.
4.The mouth of the pipe: the high-pressure water inlet are used 18*1.5 wire.
5. Main shaft: movable shaft structure, water inlet and air inlet live interface, to prevent external pipe from twisting and winding, maintenance and replacement of sealing ring is simple.
 
name High pressure pipe reel Remarks
Pipe material Double layer steel wire braided rubber tube Input Connector:1.8*1.5 inside wire
 
pipe size Double layer steel wire, internal diameter is 8.0mm
length 10m/14m
common pressure 18MPa output connector: 1.8*1.5 inside wire. Additional 22*1.5 inside wire
 
net weight 15kgs
packing size 430*250*440mm


High Pressure Drum Reel
High Pressure Drum Reel
High Pressure Drum Reel







  High pressure water drum reel GY10

Instructions:
1, open structure, easy to installation and maintenance.
2.Spindle aeronautical technology processing,excellent performance, high compressive strength, safe and reliable.
3.180Mpa high pressure pipe, wear resistance, corrosion resistance, hardening, bending resistance, rupture resistance, at low temperatures still roll freely.
4. Turntable is one piece drawing by high tension steel. Structural framework stamping forming. High strength, non deformation, durable and can be installed and used in bad working conditions.
5. The surface is sprayed with plastics, and the paint is not easy to rust and oxidize.
6. Coil spring material superior, flexible, high toughness, long-term use, shrinkage force does not decay.
7. It can be installed on wall, ceiling, worktable, lubrication locomotive.
Features:
1. drum internal maintenance, no need to disassemble the drum shell, more convenient and more efficient.
2.disc: thickening of the wheel, rigidity better, less deformation, the scope of work is greater.
3. Base: double arm, to prevent the long-term use of support deformation loss, more secure, more reliable.
4.The mouth of the pipe: the high-pressure water inlet are used 18*1.5 wire.
5. Main shaft: movable shaft structure, water inlet and air inlet live interface, to prevent external pipe from twisting and winding, maintenance and replacement of sealing ring is simple.
 
name High pressure pipe reel Remarks
Pipe material Double layer steel wire braided rubber tube Input Connector:1.8*1.5 inside wire
 
pipe size Double layer steel wire, internal diameter is 8.0mm
length 10m/14m
common pressure 18MPa output connector: 1.8*1.5 inside wire. Additional 22*1.5 inside wire
 
net weight 15kgs
packing size 430*250*440mm


High Pressure Drum Reel
High Pressure Drum Reel
High Pressure Drum Reel







 

Electrodes Cutting Mold

This kind of mold is the tool for making Li-ion battery electrodes and separator pieces ,i.e.shaped anode .cathode.separator . this kind of mold need to be highly precise(notch burr less than 0.005mm) with long life duration (more 10million cutting cycles)due to the next products they are responsible to make .

blade system in motion 5

Electrodes Cutting Mold,Electrodes Punching Die,Pole Piece Cutting Die,Electrodes Stamping Die

Guangdong Rixin Precision Technology Co., Ltd. , https://www.nissontooling.com