High Quality Pet Preform and Cap Injection Moulding Machine
Floor Fan,Floor Standing Fan,Floor Fan With Remote,Oscillating Floor Fan Foshan kanasi electrical co.,ltd , https://www.kanasifan.com
Description : Â
We are one of the famous manufactory of Plastics machinery in China. As a leader in the development and manufacture of high-performance plastics machinery. Our main products are:
*Injection blow moulding machine series.
*Fully-automatic blow moulding machine series.
*Semi-automatic blow moulding machine series.
*Automatic blow moulding machine series.
*Injection moulding machinery and extruding production lines series.
High Quality PET Preform and Cap Injection Moulding Machine
Features:
1). The main-frame of the machine is an incline. And the incline can help the cups easily drop into the plastic holes, the rate of which goes up to 99.99 %. It can reduce paper wasting, it is different from other factories.
2). The machine can send the bottom paper to the cup automatically and adjust itself because of a spring, it is also different from other factory.
3). Inside of the machine, we use three ranges chains instead of conventional two ranges chains, it is more fastness, make long service. Some factory only have two range chains.
4). About preheating and main heating, we use aluminium instead of conventional iron pipe. Once machine stop unormally, the cup in side, can not burning it can be much safer.
5). The surface of plate we use stainless steel instead of iron, it can be a much cleaning, sanitation.
6). Most of our wiring device we use adopts from overseas brand. (Japanese omron)
7). If your paper is double PE coated, the machine should be with ultrasonic.
High Quality PET Preform and Cap Injection Moulding Machine
Picture :
Free Mould Design SuppliedÂ
High Quality PET Preform and Cap Injection Moulding Machine
Technical Data  :
Item
Unit
Data
Max. clamping force
KN
3000
Max. opening force
mm
590
(V×H)Space between tie bars
mm
610×610
(min-max)Mould height
mm
220-630
Max. daylight
mm
1220
Ejector force
KN
70.6
Ejector stroke
mm
150
Ejector quantity
Â
9
Screw diameter
mm
60
65
70
Screw L/D ratio
L/D
22.7
21
19.5
Theoretical shot volume
cm 3
848
995
1154
Plasticising weight(PS)
g
772
905
1050
Injection pressure
Mpa
207
176
152
Theoretical injection rate(PS)
g
241
283
328
Plasticising capacity(PS)
g/s
35.2
43.3
51.8
Screw torque
N.m
2530
Max. screw rotate speed
r/min
150
Injection stroke
mm
300
Pump motor power
KW
30
Pump pressure
Mpa
16
Heating power
KW
22
Heating zone
Â
5
Size
m
6.7×1.75×2.25
Net weight
t
11
International designation
Â
3000-1750
High Quality PET Preform and Cap Injection Moulding Machine
Cooperation Brand :
Â
High Quality PET Preform and Cap Injection Moulding Machine
Our Customer :Â
Warmly welcome customer visit our factoty , and we will have following service supplied :Â 
What is your delivery time In Reliable can supply?
In order to make this production line reach a good effect, we suggest time arrangement as follows:
Manufacture time: 30 ~50 days
Transportation time: 30 days
Installation and adjustment time: 15 days
Note: If the delay is caused by customer, the relevant time arrangement above will postpone two times of delay time.Â
What is your Package and Transportation Reliable can supply?
Packing way: Adopt new and firm carton box that is suit for long journey sea transportation and block erection.
Transportation way: Sea transportation
               Welcome to visit ZhangJiaGang Reliable Machinery Â
